Skip to content

Setup and Characterisation

Jump to bottom
LLindenroth edited this page Jun 11, 2020 · 8 revisions

Relying on the ASTM D412 testing standards, the materials are characterised tensile testing of dumbell-shaped specimens. CAD files for the respective moulds are provided here.

Fabrication of the Specimen

Elastomer_Fabrication_Step

Specimen are created given the following protocol.

  1. Mixing of the two components
  2. De-airing mixture
  3. Pouring the mixture into 3d printed moUlds
  4. Curing for at least 24h
  5. Verifying the correct dimensions
  6. Inspecting the specimen for imperfections such as trapped air bubbles

Tensile Tests Raw Data

animated_tensile_test

Experimental tensile stress-strain data are available in the repository under the folder:

https://github.com/LucMarechal/Soft-Robotics-Materials-Database/tree/master/Tensile-Tests-Data

Constitutive Model Curve Fitting Script

An open source online app is available to fit experimental tensile stress-strain data :

Written in Python, the code is availlable in the repository under the folder: https://github.com/LucMarechal/Soft-Robotics-Materials/tree/master/Python%20script%20fitting%20of%20hyperelastic%20constitutive%20models

Clone this wiki locally