-
Notifications
You must be signed in to change notification settings - Fork 0
Benchmarks
All numbers were captured on a real BC-250 running SkillFishOS, with the settings noted. Full settings, clocks, voltages, temperatures and power are on the skillfishos.com performance page.
The official Wukong Benchmark Tool, 1080p, mostly-High preset, ray tracing off.
| GPU governor mode | Avg FPS | 5%-low FPS | Notes |
|---|---|---|---|
| Balanced (load-target 0.70–0.95) | 100 | 92 | GPU averages ~1.67 GHz, backing off in CPU-bound scenes |
| Performance (load-target 0.08–0.20) | 111 | 102 | GPU holds 2200 MHz the whole run; GPU max ~85 °C |
+11% average and +11% on the slowest frames, just from holding the clock — see GPU Governor and Tuning. (Gameplay, which is more CPU/draw-call bound, sees a smaller difference; the benchmark flythrough is heavier and GPU-bound.)
A fixed-clock pin to 2230 MHz @ 1000 mV measured ~113 FPS but hard-froze the machine on the clock transition — 2230 @ 1000 mV is undervolted. The safe Performance profile at 2200 MHz gets within noise of it without the crash. This is exactly why the shipped curve caps at 2200; see Troubleshooting#gpu-hard-freeze.
~113 FPS, score 2865 (see the site for the full run and settings).
Captured at the High preset, with side-by-side comparisons against an RX 6600 and RX 6700 XT (and a Bazzite reference) on the performance page.
| Configuration | GFLOPS |
|---|---|
| tkg + governor, 24 CU | 6,868 |
| tkg + governor + 40 CU | 11,329 |
See Compute Units (40-CU). Memory bandwidth measured ~350–367 GB/s (clpeak).
Use the SkillFishOS Tuner to apply the profile, set the GPU Governor and Tuning, max the fan, and run your benchmark. The Tuner's live monitor records temperature/frequency/voltage/fan during the run.
Getting started
Apps
Tuning & hardware
Using it
Developers