Insert BlueR Plus Configuration

[ils15]

Added Marlin Configuration for BlueR Plus

Need testing because i dont have the printer

What i need to test

• - Motor Direction and steps
• - BLTOUCH Offset and probe procedure (G29)
• - SD Card Read
• - Screen Calibration
• - PID parameters for hotend and bed (200/60 - 240/100)

Please send feedback here to make adjust before merging

A TIP

You need compile firmware using env:mks_robin_nano35 and rename bin file to Robin_nano43.bin before put it inside SD Card

[Snapperjagger]

It's Rudy Lenglet!
The screen is freezing on the progress bar when tft updating

[ils15]

It's Rudy Lenglet!
The screen is freezing on the progress bar when tft updating

in general, problem is original sd card
try to format sd card in fat32 and try again

[Snapperjagger]

it's the original, provide with the printer. let me try with another one

[Snapperjagger]

sorry it was diner time lol!
So it works but the screen is upside down. it needs to flip 180°.
i got a message: "EEPROM version error --- initialize EEPROM"

[ils15]

sorry it was diner time lol!
So it works but the screen is upside down. it needs to flip 180°.
i got a message: "EEPROM version error --- initialize EEPROM"

great
i will update screen
eeprom error is normal when you install a new firmware with new features
just press green button
I enable
#define TFT_ROTATION TFT_ROTATE_180 in line 2431
screen will be fixed now

[Snapperjagger]

ok
got the ui from Marlin. Temperature probes seems to work

[ils15]

ok
got the ui from Marlin. Temperature probes seems to work

please check motor moviment too

[Snapperjagger]

hotend fan work but it's a difficult to adjust the speed.
the icons showed on the screen don't work but if you touch the screen on the bottom (where the icons should be) i succeed to make the fan run.

[ils15]

hotend fan work but it's a difficult to adjust the speed.
the icons showed on the screen don't work but if you touch the screen on the bottom (where the icons should be) i succeed to make the fan run.

great
do you fix screen orientation?

i believe we need some calibration initially. I will disable calibration values and lets people calibrate screen for the first time
after you rotate screen, can calibrate it
long press screen and a calibration menu will appear

[Snapperjagger]

Hotend heating works too
i don't fix the screen orientation yet

[ils15]

Hotend heating works too
i don't fix the screen orientation yet
find this line in config file
#define TFT_ROTATION TFT_NO_ROTATION
uncomment and change rotation to
#define TFT_ROTATION TFT_ROTATE_180

[Snapperjagger]

yep i just have compiled it with the modification
i try now

[Snapperjagger]

i re format the sdcard
it didn't take the update

[Snapperjagger]

ok screen is in the right position.
now calibration failed

[ils15]

Try again slowly....
I don't know right calibration parameters for this screen

[Snapperjagger]

ok good news the axis runs and in the right direction

[Snapperjagger]

but i didn't succeed the calibrate the screen. each time i enter into the calibration mode, i don't have enought time to relaese the screen and the top left cross disappear from the screen and pas to the following cross

[ils15]

but i didn't succeed the calibrate the screen. each time i enter into the calibration mode, i don't have enought time to relaese the screen and the top left cross disappear from the screen and pas to the following cross

CALIBRACAO.TELA.gif.mp4

[Snapperjagger]

so i don't succeed to acceed correctly to certain functions

[ils15]

so i don't succeed to acceed correctly to certain functions

put a gcode in sdcard with a M995 value
put it to print

You can comment these lines in firmware too
// XPT2046 Touch Screen calibration
//#define XPT2046_X_CALIBRATION 17880
//#define XPT2046_Y_CALIBRATION -12234
//#define XPT2046_X_OFFSET -45
//#define XPT2046_Y_OFFSET 349
//#define TOUCH_ORIENTATION TOUCH_LANDSCAPE
after it, printer will run a screen calibration in a first boot

[Snapperjagger]

in the configuration.h??

[ils15]

so i don't succeed to acceed correctly to certain functions

put a gcode in sdcard with a M995 value
put it to print

in the configuration.h??

yes

[Snapperjagger]

ok let me see

[Snapperjagger]

it don't work know, i have to stay push on the screen to enter in calibration mode then i have the cros like in first time but now after press the last cross i have the top left and the bottom right crosses in same time and the screen is freezed to this status.

[Snapperjagger]

i will try by a terminal to enter the M995 code

[Snapperjagger]

calibration completed by the terminal

[ils15]

calibration completed by the terminal

great..
Check sd card funcionality please
some users talks about bugs in process

[Snapperjagger]

wait i have copy the stl instaed of gcode

[Snapperjagger]

Recv: Touch screen calibration completed
Recv: TOUCH_CALIBRATION_X 16128
Recv: TOUCH_CALIBRATION_Y 10841
Recv: TOUCH_OFFSET_X -13
Recv: TOUCH_OFFSET_Y -36
Recv: TOUCH_ORIENTATION TOUCH_PORTRAIT

[Snapperjagger]

sdcard is readed

[Snapperjagger]

i see my gcode files on the screen

[Snapperjagger]

got the error message from octoprint:
Changing monitoring state from "Operational" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:3831)"
Connection closed, closing down monitor
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@250000
Trying port /dev/ttyUSB0, baudrate 250000
Connecting to port /dev/ttyUSB0, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0x6a47d610, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor

[ils15]

got the error message from octoprint:
Changing monitoring state from "Operational" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:3831)"
Connection closed, closing down monitor
Changing monitoring state from "Offline" to "Detecting serial connection"
Performing autodetection with 1 port/baudrate candidates: /dev/ttyUSB0@250000
Trying port /dev/ttyUSB0, baudrate 250000
Connecting to port /dev/ttyUSB0, baudrate 250000
Handshake attempt #1 with timeout 2.0s
Connected to: Serial<id=0x6a47d610, open=True>(port='/dev/ttyUSB0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=2.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor

port already open in another instance for sure

[Snapperjagger]

maybe my webcam

[Snapperjagger]

bed:
Kp: +060.1
Ki: +008.07
Kd: +298.9
extruder:
kP: +024.6
kI: +002.90
kD: +052.3

[ils15]

bed:
Kp: +060.1
Ki: +008.07
Kd: +298.9
extruder:
kP: +024.6
kI: +002.90
kD: +052.3

thanks man
any advice?

[Snapperjagger]

powwer outage is off. You can enable on the screen but it will be nice to put it on for others

[Snapperjagger]

i will do a print test later. it's late in France. I leave you

[ils15]

i will do a print test later. it's late in France. I leave you

no problem friend. we done a excellent job together
thank you

[Snapperjagger]

you're welcome. I will see later for the makerbase UI.

[Snapperjagger]

hey what's new!!
i just try the auto bed leveling and it work well in 3x3 points. Regarding the original firmware, when i executed an auto leveling, the hotend cames to the bed center at the end of the grid pointing and then go down to the z offset value. On the screen appeared the Z Offset setting. That permitted me to adjust the Z offset with a paper. With this procedure, it permit to start a print without doing any G29. now i can't as the hotend stay on the last point.
Do i need to proceed differently now? How can i adjust the Z offset now?
Other point, on the Probe Z offset (in motion menu) the plus and minus are reversed (when i touch plus it decrease the value and vice versa).
I will try a calibration cube for first print test.

[Snapperjagger]

first print ok
strangely the plus/minus issue disappear in the motion menu (if i remember well)

[Snapperjagger]

i have try to recompile with your last files but i got an error when compiling:
buildroot/share/PlatformIO/scripts/../../../../Marlin/src/inc/../../Configuration.h:2460:2: error: invalid preprocessing directive #TOUCH_ORIENTATION

[Snapperjagger]

missing #define before