How to make Connections under Topology view (not only in network view)?

[mkdthanga]

I am trying to create Port connections as well, so that connections would be made also in Topology view. Do you know how to make that connections (under topology view) using python tia openess?

Thanks in advance :)

Regards,
Thangz

[mkdthanga]

I can connect first 6 network ports successfully like this:

network_port_1 = tia.IEngineeringServiceProvider(myproject.Devices[0].DeviceItems[1].DeviceItems[3].DeviceItems[0]).GetService[hwf.NetworkPort]() # cpu port1
network_port_2 = tia.IEngineeringServiceProvider(myproject.Devices[1].DeviceItems[1].DeviceItems[0].DeviceItems[0]).GetService[hwf.NetworkPort]() # danfoss1 port1
network_port_3 = tia.IEngineeringServiceProvider(myproject.Devices[1].DeviceItems[1].DeviceItems[0].DeviceItems[1]).GetService[hwf.NetworkPort]() # danfoss1 port2
network_port_4 = tia.IEngineeringServiceProvider(myproject.Devices[2].DeviceItems[1].DeviceItems[0].DeviceItems[0]).GetService[hwf.NetworkPort]() # danfoss2 port1
network_port_5 = tia.IEngineeringServiceProvider(myproject.Devices[2].DeviceItems[1].DeviceItems[0].DeviceItems[1]).GetService[hwf.NetworkPort]() # danfoss2 port2
network_port_6 = tia.IEngineeringServiceProvider(myproject.Devices[3].DeviceItems[1].DeviceItems[0].DeviceItems[0]).GetService[hwf.NetworkPort]() # danfoss3 port1
# connect the ports one by one
network_port_1.ConnectToPort(network_port_2)
network_port_3.ConnectToPort(network_port_4)
network_port_5.ConnectToPort(network_port_6)