new virtual detectors #1711

sdifalco · 2026-02-02T18:09:57Z

No description provided.

FNALbuild · 2026-02-02T18:10:22Z

Hi @sdifalco,
You have proposed changes to files in these packages:

Mu2eG4
DataProducts
GeometryService

which require these tests: build.

@Mu2e/write have access to CI actions on Run1B.

⌛ The following tests have been triggered for e451291: build (Build queue - API unavailable)

About FNALbuild. Code review on Mu2e/Offline.

FNALbuild · 2026-02-02T18:24:39Z

☔ The build tests failed for e451291.

Test	Result	Details
test with	✅	Command did not list any other PRs to include
merge	✅	Merged `e451291` at `acfae4f`
build (prof)	✅	Log file. Build time: 09 min 25 sec
ceSimReco	✅	Log file.
g4test_03MT	✅	Log file.
transportOnly	✅	Log file.
POT	✅	Log file.
g4study	✅	Log file.
cosmicSimReco	✅	Log file.
cosmicOffSpill	❌	Log file. Return Code 9.
ceSteps	✅	Log file.
ceDigi	❌	Log file. Return Code 9.
muDauSteps	❌	Log file. Return Code 9.
ceMix	❌	Log file. Return Code 9.
rootOverlaps	✅	Log file.
g4surfaceCheck	✅	Log file.
trigger	❌	Log file. Return Code 2.
check_cmake	✅	Log file.
FIXME, TODO	✅	TODO (0) FIXME (0) in 0 files
clang-tidy	✅	0 errors 0 warnings
whitespace check	✅	no whitespace errors found

N.B. These results were obtained from a build of this Pull Request at e451291 after being merged into the base branch at acfae4f.

For more information, please check the job page here.
Build artifacts are deleted after 5 days. If this is not desired, select Keep this build forever on the job page.

oksuzian · 2026-02-03T17:16:16Z

@FNALbuild run build test

FNALbuild · 2026-02-03T17:16:43Z

⌛ The following tests have been triggered for e451291: build (Build queue - API unavailable)

FNALbuild · 2026-02-03T17:28:57Z

☀️ The build tests passed at e451291.

Test	Result	Details
test with	✅	Command did not list any other PRs to include
merge	✅	Merged `e451291` at `9fbff5d`
build (prof)	✅	Log file. Build time: 04 min 36 sec
ceSimReco	✅	Log file.
g4test_03MT	✅	Log file.
transportOnly	✅	Log file.
POT	✅	Log file.
g4study	✅	Log file.
cosmicSimReco	✅	Log file.
cosmicOffSpill	✅	Log file.
ceSteps	✅	Log file.
ceDigi	✅	Log file.
muDauSteps	✅	Log file.
ceMix	✅	Log file.
rootOverlaps	✅	Log file.
g4surfaceCheck	✅	Log file.
trigger	❌	Log file. Return Code 2.
check_cmake	✅	Log file.
FIXME, TODO	✅	TODO (0) FIXME (0) in 0 files
clang-tidy	✅	0 errors 0 warnings
whitespace check	✅	no whitespace errors found

N.B. These results were obtained from a build of this Pull Request at e451291 after being merged into the base branch at 9fbff5d.

For more information, please check the job page here.
Build artifacts are deleted after 5 days. If this is not desired, select Keep this build forever on the job page.

oksuzian · 2026-02-05T01:24:27Z

@FNALbuild run build test

FNALbuild · 2026-02-05T01:24:51Z

⌛ The following tests have been triggered for b1b7f1c: build (Build queue - API unavailable)

Copilot

Pull request overview

This PR adds new virtual detectors for electromagnetic calorimeter (EMC) studies and tracker front-end board (FEB) measurements in the Mu2e detector simulation.

Changes:

Added three new EMC virtual detector IDs (EMC_Source, EMC_Source2, EMC_0_Front) and 19 Tracker FEB virtual detector IDs (Tracker_FEB_0-18_SurfIn) to the VirtualDetectorId enumeration
Implemented construction logic for these new virtual detectors in both VirtualDetectorMaker.cc and constructVirtualDetectors.cc
Added configuration parameters for EMC virtual detector z-positions to the geometry file
Fixed uninitialized variable warnings by adding default initializers to opaz0, opaz1, opari0, opari1 variables
Refactored disk calorimeter virtual detector code formatting and uncommented previously disabled tracker virtual detector code

Reviewed changes

Copilot reviewed 4 out of 4 changed files in this pull request and generated 10 comments.

File	Description
DataProducts/inc/VirtualDetectorId.hh	Added 22 new virtual detector enum values and corresponding string names, plus isFEBTracker() helper method
GeometryService/src/VirtualDetectorMaker.cc	Uncommented and updated tracker virtual detector creation logic; added EMC_Source, EMC_Source2, and EMC_0_Front virtual detector definitions; uncommented solenoidOffset variable
Mu2eG4/src/constructVirtualDetectors.cc	Fixed uninitialized variable warnings; added construction logic for new EMC and Tracker FEB virtual detectors; refactored calorimeter virtual detector code formatting; added isDumbbell configuration logic for parent volume selection
Mu2eG4/geom/geom_run1_b_v01.txt	Added configuration parameters for EMC virtual detector z-positions (zEMCSourceInMu2e, zEMCSource2InMu2e, zEMC0Front)

💡 Add Copilot custom instructions for smarter, more guided reviews. Learn how to get started.

Copilot · 2026-02-05T01:29:15Z

Mu2eG4/src/constructVirtualDetectors.cc

+          ++vdIdDiskEdge;

-               ++vdIdFEBSurf;
+          //needed to maintain the consistence with the numbering scheme


Spelling error in comment: 'consistence' should be 'consistency'.

Suggested change

//needed to maintain the consistence with the numbering scheme

//needed to maintain the consistency with the numbering scheme

Copilot · 2026-02-05T01:29:15Z

Mu2eG4/src/constructVirtualDetectors.cc

+                                    false);
+
+          //        doSurfaceCheck && checkForOverlaps(vd.physical, _config, verbosityLevel>0);
+          doSurfaceCheck && checkForOverlaps(vd.physical, _config, true);


This overlap check uses hardcoded 'true' for the verbosity parameter instead of 'verbosityLevel>0' which is used consistently elsewhere in the file (see lines 1947, 2011, 2076, etc.). This forces verbose output regardless of the configured verbosity level. Either this should be changed to match the pattern used elsewhere, or if the forced verbosity is intentional, a comment explaining why should be added.

Suggested change

doSurfaceCheck && checkForOverlaps(vd.physical, _config, true);

doSurfaceCheck && checkForOverlaps(vd.physical, _config, verbosityLevel>0);

Copilot · 2026-02-05T01:29:15Z

Mu2eG4/src/constructVirtualDetectors.cc

+        VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
+          _helper->locateVolInfo(theDS3) :


The parent volume selection logic is redundant. This code is inside a block that only executes when 'isDumbbell' is false (line 1890), so the ternary operator on lines 1925-1927 will always evaluate to false and always select DS2Vacuum. The check for isDumbbell is redundant here. Either remove the outer 'if ( !_config.getBool("isDumbbell",false) )' condition, or simplify the parent volume selection to just use DS2Vacuum directly without the ternary operator.

Suggested change

VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?

_helper->locateVolInfo(theDS3) :

VolumeInfo const & parent =

Copilot · 2026-02-05T01:29:16Z

Mu2eG4/src/constructVirtualDetectors.cc

+        std::string theDS3("DS3Vacuum");
+        if ( _config.getBool("inGaragePosition",false) ) theDS3 = "garageFakeDS3Vacuum";
+
+        VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
+          _helper->locateVolInfo(theDS3) :
+          _helper->locateVolInfo("DS2Vacuum"); //DS3Vacuum to move the targets


The parent volume selection logic is redundant. This code is inside a block that only executes when 'isDumbbell' is false (line 1953), so the ternary operator on lines 1989-1991 will always evaluate to false and always select DS2Vacuum. The check for isDumbbell is redundant here. Either remove the outer 'if ( !_config.getBool("isDumbbell",false) )' condition, or simplify the parent volume selection to just use DS2Vacuum directly without the ternary operator.

Suggested change

std::string theDS3("DS3Vacuum");

if ( _config.getBool("inGaragePosition",false) ) theDS3 = "garageFakeDS3Vacuum";

VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?

_helper->locateVolInfo(theDS3) :

_helper->locateVolInfo("DS2Vacuum"); //DS3Vacuum to move the targets

VolumeInfo const & parent = _helper->locateVolInfo("DS2Vacuum");

Copilot · 2026-02-05T01:29:16Z

Mu2eG4/src/constructVirtualDetectors.cc

+    if ( _config.getBool("hasTracker",false)  ) {
+      // the radius of tracker support
+      Tracker const & tracker = *(GeomHandle<Tracker>());
+      double orvd = tracker.g4Tracker()->getSupportParams().getTubsParams().outerRadius()-20.1; // Avoid tracker support beam
+      //double irvd = tracker.g4Tracker()->getSupportParams().getTubsParams().innerRadius();
+      double irvd = tracker.g4Tracker()->mother().tubsParams().innerRadius();
+
+      cout << "TRACKER FEB VD OUTER INNER RADIUS " << orvd << " "  << irvd << endl;
+      TubsParams vdParamsTracker(irvd,orvd,vdHalfLength);
+      cout << "Tracker_FEB_SurfIn parameters: " << vdParamsTracker << endl;
+      VolumeInfo const & parent = _helper->locateVolInfo("TrackerMother");
+      for ( int ipln=0; ipln<StrawId::_nplanes+1; ipln+=2 ){
+        // placing virtual detectors before FEB of tracker stations
+        vdId = VirtualDetectorId::Tracker_FEB_0_SurfIn+ipln/2;
+        if( vdg->exist(vdId) ) {
+          if ( verbosityLevel > 0) {
+            cout << __func__ << " constructing " << VirtualDetector::volumeName(vdId)  << endl;
+          }
+          CLHEP::Hep3Vector vdPos = vdg->getGlobal(vdId)-parent.centerInMu2e();
+          cout << "Tracker_FEB_" << ipln/2 << "_SurfIn: " << vdPos << " " << vdg->getLocal(vdId) << endl;
+
+          VolumeInfo vd = nestTubs( VirtualDetector::volumeName(vdId),
+                                    vdParamsTracker, downstreamVacuumMaterial, 0,
+                                    vdPos,
+                                    parent,
+                                    vdId, vdIsVisible, G4Color::Red(), vdIsSolid,
+                                    forceAuxEdgeVisible,
+                                    placePV,
+                                    false);
+
+          //        doSurfaceCheck && checkForOverlaps(vd.physical, _config, verbosityLevel>0);
+          doSurfaceCheck && checkForOverlaps(vd.physical, _config, true);
+        }
+      }
+    }


Inconsistent condition between VirtualDetectorMaker.cc and constructVirtualDetectors.cc. In VirtualDetectorMaker.cc (line 259), Tracker_FEB virtual detectors are only created when 'TrackerHasBrassRings' is true. However, in constructVirtualDetectors.cc (line 2081), the code attempts to construct them when only 'hasTracker' is true. While the vdg->exist(vdId) check on line 2095 may prevent errors, this inconsistency could lead to confusion. Consider adding the same TrackerHasBrassRings check here for clarity and to match the logic in VirtualDetectorMaker.cc.

Copilot · 2026-02-05T01:29:16Z

Mu2eG4/src/constructVirtualDetectors.cc

+          VolumeInfo vdInfo = nestTubs(VirtualDetector::volumeName(vdIdFEBSurf),
+vdParamsFrontFEB,downstreamVacuumMaterial,0,posFrontFEB,caloFEBParent,vdIdFEBSurf,vdIsVisible,G4Color::Red(),vdIsSolid,forceAuxEdgeVisible,placePV,false);
+          ++vdIdFEBSurf;
+
+          VolumeInfo vdInfo2 = nestTubs(VirtualDetector::volumeName(vdIdFEBSurf),vdParamsFrontFEB,downstreamVacuumMaterial,0,posBackFEB,caloFEBParent,vdIdFEBSurf,vdIsVisible,G4Color::Red(),vdIsSolid,forceAuxEdgeVisible,placePV,false);
+
+
+          ++vdIdFEBSurf;
+
+          doSurfaceCheck && checkForOverlaps(vdInfo.physical, _config, verbosityLevel>0);
+          doSurfaceCheck && checkForOverlaps(vdInfo2.physical, _config, verbosityLevel>0);
+        }
+
+        if( vdg->exist(vdIdFEBEdge)){
+          VolumeInfo vdInfo = nestTubs(VirtualDetector::volumeName(vdIdFEBEdge),
+vdParamsInnerFEB,downstreamVacuumMaterial,0,posInnerFEB,caloFEBParent,vdIdFEBEdge,vdIsVisible,G4Color::Red(),vdIsSolid,forceAuxEdgeVisible,placePV,false);


Line 1302 and 1316 have incorrect indentation. The continuation of the nestTubs function call should be indented properly, not starting at column 0. This makes the code hard to read and breaks visual alignment with the rest of the code.

Copilot · 2026-02-05T01:29:16Z

GeometryService/src/VirtualDetectorMaker.cc

+      vd->addVirtualDetector( VirtualDetectorId::EMC_Source2,
+                               ds2centerInMu2e, 0, posEMCSource2);
+      // VD EMC_0_Front is placed in front of EMC Disk 0
+      const double zVDEMC0Front = c.getDouble("zEMC0Front",5830.);


The default value for 'zEMC0Front' is inconsistent between the geometry configuration file (8695.0) and the code default (5830.0). This could lead to unexpected behavior if the configuration parameter is not explicitly set. The defaults should match to ensure consistent behavior.

Suggested change

const double zVDEMC0Front = c.getDouble("zEMC0Front",5830.);

const double zVDEMC0Front = c.getDouble("zEMC0Front",8695.0);

Copilot · 2026-02-05T01:29:16Z

Mu2eG4/src/constructVirtualDetectors.cc

+        std::string theDS3("DS3Vacuum");
+        if ( _config.getBool("inGaragePosition",false) ) theDS3 = "garageFakeDS3Vacuum";
+
+        VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
+          _helper->locateVolInfo(theDS3) :
+          _helper->locateVolInfo("DS2Vacuum"); //DS3Vacuum to move the targets


The parent volume selection logic is redundant. This code is inside a block that only executes when 'isDumbbell' is false (line 2017), so the ternary operator on lines 2054-2056 will always evaluate to false and always select DS2Vacuum. The check for isDumbbell is redundant here. Either remove the outer 'if ( !_config.getBool("isDumbbell",false) )' condition, or simplify the parent volume selection to just use DS2Vacuum directly without the ternary operator.

Suggested change

std::string theDS3("DS3Vacuum");

if ( _config.getBool("inGaragePosition",false) ) theDS3 = "garageFakeDS3Vacuum";

VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?

_helper->locateVolInfo(theDS3) :

_helper->locateVolInfo("DS2Vacuum"); //DS3Vacuum to move the targets

VolumeInfo const & parent =

_helper->locateVolInfo("DS2Vacuum"); // DS3Vacuum to move the targets

Copilot · 2026-02-05T01:29:17Z

Mu2eG4/src/constructVirtualDetectors.cc

+    vdId = VirtualDetectorId::EMC_Source;
+
+    if ( !_config.getBool("isDumbbell",false) ){
+      double Ravr = ds->rIn1();
+
+      if ( _config.getBool("hasTSdA",false) ) {
+        Ravr = _config.getDouble("TSdA.rFactorForVDs");
+      }

+      bool opaflag = false;
+      double opaz0=0., opaz1=0., opari0=0., opari1=0.;
+      if ( _config.getBool("hasProtonAbsorber", true) ) {
+        GeomHandle<MECOStyleProtonAbsorber> pageom;
+        if ( pageom->isAvailable(ProtonAbsorberId::opabs1) ) {
+          opaflag = true;
+          MECOStyleProtonAbsorberPart opa = pageom->part(2);
+          opaz0 = opa.center().z()-opa.halfLength();
+          opaz1 = opa.center().z()+opa.halfLength();
+          opari0 = opa.innerRadiusAtStart();
+          opari1 = opa.innerRadiusAtEnd();
+        }
+      }
+      if( vdg->exist(vdId) ) {
+        cout << __func__ << " constructing " << VirtualDetector::volumeName(vdId)  << endl;
+
+        double zvd = vdg->getGlobal(vdId).z();
+        if (opaflag) {
+          Ravr = (opari1 - opari0)/(opaz1 - opaz0) * (zvd - opaz0) + opari0;
+        }
+        double rvd = Ravr - 100.0;
+        cout << __func__ << " " << VirtualDetector::volumeName(vdId) <<
+          " z, r : " << zvd << ", " << rvd << endl;
+
+        TubsParams vdParamsTarget(0.,rvd,vdHalfLength);
+        std::string theDS3("DS3Vacuum");
+        if ( _config.getBool("inGaragePosition",false) ) theDS3 = "garageFakeDS3Vacuum";
+
+        VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
+          _helper->locateVolInfo(theDS3) :
+          _helper->locateVolInfo("DS2Vacuum"); //DS3Vacuum to move the targets
+
+        if (verbosityLevel >0) {
+          cout << __func__ << " " << VirtualDetector::volumeName(vdId) << " Z offset in Mu2e    : " <<
+            zvd << endl;
+          cout << __func__ << " " << VirtualDetector::volumeName(vdId) << " Z extent in Mu2e    : " <<
+            zvd - vdHalfLength << ", " << zvd + vdHalfLength << endl;
+        }
+
+        VolumeInfo vd = nestTubs( VirtualDetector::volumeName(vdId),
+                                  vdParamsTarget, downstreamVacuumMaterial, 0,
+                                  vdg->getLocal(vdId),
+                                  parent,
+                                  vdId,
+                                  vdIsVisible,
+                                  G4Color::Red(), vdIsSolid,
+                                  forceAuxEdgeVisible,
+                                  placePV,
+                                  false);
+
+        doSurfaceCheck && checkForOverlaps(vd.physical, _config, verbosityLevel>0);
+      }
+    }
+
+    vdId = VirtualDetectorId::EMC_Source2;
+
+    if ( !_config.getBool("isDumbbell",false) ){
+      double Ravr = ds->rIn1();
+
+      if ( _config.getBool("hasTSdA",false) ) {
+        Ravr = _config.getDouble("TSdA.rFactorForVDs");
+      }
+
+      bool opaflag = false;
+      double opaz0=0., opaz1=0., opari0=0., opari1=0.;
+      if ( _config.getBool("hasProtonAbsorber", true) ) {
+        GeomHandle<MECOStyleProtonAbsorber> pageom;
+        if ( pageom->isAvailable(ProtonAbsorberId::opabs1) ) {
+         opaflag = true;
+         MECOStyleProtonAbsorberPart opa = pageom->part(2);
+         opaz0 = opa.center().z()-opa.halfLength();
+         opaz1 = opa.center().z()+opa.halfLength();
+         opari0 = opa.innerRadiusAtStart();
+         opari1 = opa.innerRadiusAtEnd();
+       }
+      }
+      if( vdg->exist(vdId) ) {
+        cout << __func__ << " constructing " << VirtualDetector::volumeName(vdId)  << endl;
+
+        double zvd = vdg->getGlobal(vdId).z();
+        if (opaflag) {
+          Ravr = (opari1 - opari0)/(opaz1 - opaz0) * (zvd - opaz0) + opari0;
+        }
+        double rvd = Ravr - 100.0;
+
+        cout << __func__ << " " << VirtualDetector::volumeName(vdId) <<
+          " z, r : " << zvd << ", " << rvd << endl;
+
+        TubsParams vdParamsTarget(0.,rvd,vdHalfLength);
+        std::string theDS3("DS3Vacuum");
+        if ( _config.getBool("inGaragePosition",false) ) theDS3 = "garageFakeDS3Vacuum";
+
+        VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
+          _helper->locateVolInfo(theDS3) :
+          _helper->locateVolInfo("DS2Vacuum"); //DS3Vacuum to move the targets
+
+        if (verbosityLevel >0) {
+          cout << __func__ << " " << VirtualDetector::volumeName(vdId) << " Z offset in Mu2e    : " <<
+            zvd << endl;
+          cout << __func__ << " " << VirtualDetector::volumeName(vdId) << " Z extent in Mu2e    : " <<
+            zvd - vdHalfLength << ", " << zvd + vdHalfLength << endl;
+        }
+
+        VolumeInfo vd = nestTubs( VirtualDetector::volumeName(vdId),
+                                  vdParamsTarget, downstreamVacuumMaterial, 0,
+                                  vdg->getLocal(vdId),
+                                  parent,
+                                  vdId,
+                                  vdIsVisible,
+                                  G4Color::Red(), vdIsSolid,
+                                  forceAuxEdgeVisible,
+                                  placePV,
+                                  false);
+
+        doSurfaceCheck && checkForOverlaps(vd.physical, _config, verbosityLevel>0);
+      }
+    }
+
+    vdId = VirtualDetectorId::EMC_0_Front;
+
+    if ( !_config.getBool("isDumbbell",false) ){
+      double Ravr = ds->rIn1();
+
+      if ( _config.getBool("hasTSdA",false) ) {
+        Ravr = _config.getDouble("TSdA.rFactorForVDs");
+      }
+
+      bool opaflag = false;
+      double opaz0=0., opaz1=0., opari0=0., opari1=0.;
+      if ( _config.getBool("hasProtonAbsorber", true) ) {
+        GeomHandle<MECOStyleProtonAbsorber> pageom;
+        if ( pageom->isAvailable(ProtonAbsorberId::opabs1) ) {
+          opaflag = true;
+          MECOStyleProtonAbsorberPart opa = pageom->part(2);
+          opaz0 = opa.center().z()-opa.halfLength();
+          opaz1 = opa.center().z()+opa.halfLength();
+          opari0 = opa.innerRadiusAtStart();
+          opari1 = opa.innerRadiusAtEnd();
+        }
+      }
+      if( vdg->exist(vdId) ) {
+        cout << __func__ << " constructing " << VirtualDetector::volumeName(vdId)  << endl;
+
+        double zvd = vdg->getGlobal(vdId).z();
+        if (opaflag) {
+          Ravr = (opari1 - opari0)/(opaz1 - opaz0) * (zvd - opaz0) + opari0;
+        }
+        double rvd = Ravr - 100.0;
+
+        cout << __func__ << " " << VirtualDetector::volumeName(vdId) <<
+          " z, r : " << zvd << ", " << rvd << endl;
+
+
+        TubsParams vdParamsTarget(0.,rvd,vdHalfLength);
+        std::string theDS3("DS3Vacuum");
+        if ( _config.getBool("inGaragePosition",false) ) theDS3 = "garageFakeDS3Vacuum";
+
+        VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
+          _helper->locateVolInfo(theDS3) :
+          _helper->locateVolInfo("DS2Vacuum"); //DS3Vacuum to move the targets
+
+        if (verbosityLevel >0) {
+          cout << __func__ << " " << VirtualDetector::volumeName(vdId) << " Z offset in Mu2e    : " <<
+            zvd << endl;
+          cout << __func__ << " " << VirtualDetector::volumeName(vdId) << " Z extent in Mu2e    : " <<
+            zvd - vdHalfLength << ", " << zvd + vdHalfLength << endl;
+        }
+
+        VolumeInfo vd = nestTubs( VirtualDetector::volumeName(vdId),
+                                  vdParamsTarget, downstreamVacuumMaterial, 0,
+                                  vdg->getLocal(vdId),
+                                  parent,
+                                  vdId,
+                                  vdIsVisible,
+                                  G4Color::Red(), vdIsSolid,
+                                  forceAuxEdgeVisible,
+                                  placePV,
+                                  false);
+
+        doSurfaceCheck && checkForOverlaps(vd.physical, _config, verbosityLevel>0);
+      }
+    }


The code blocks for constructing EMC_Source, EMC_Source2, and EMC_0_Front virtual detectors contain significant duplication. The three blocks (lines 1888-1949, 1951-2013, and 2015-2078) are nearly identical except for the vdId being constructed. Consider extracting this logic into a helper function that takes the vdId as a parameter to reduce code duplication and improve maintainability.

Copilot · 2026-02-05T01:29:17Z

Mu2eG4/src/constructVirtualDetectors.cc

+         opaz1 = opa.center().z()+opa.halfLength();
+         opari0 = opa.innerRadiusAtStart();
+         opari1 = opa.innerRadiusAtEnd();
+       }


Inconsistent indentation: this block uses single space indentation while the surrounding code at line 1902 uses double space indentation. The indentation should be consistent with the rest of the block.

Suggested change

}

}

FNALbuild · 2026-02-05T01:36:01Z

☀️ The build tests passed at b1b7f1c.

Test	Result	Details
test with	✅	Command did not list any other PRs to include
merge	✅	Merged `b1b7f1c` at `047cad6`
build (prof)	✅	Log file. Build time: 04 min 33 sec
ceSimReco	✅	Log file.
g4test_03MT	✅	Log file.
transportOnly	✅	Log file.
POT	✅	Log file.
g4study	✅	Log file.
cosmicSimReco	✅	Log file.
cosmicOffSpill	✅	Log file.
ceSteps	✅	Log file.
ceDigi	✅	Log file.
muDauSteps	✅	Log file.
ceMix	✅	Log file.
rootOverlaps	✅	Log file.
g4surfaceCheck	✅	Log file.
trigger	❌	Log file. Return Code 2.
check_cmake	✅	Log file.
FIXME, TODO	✅	TODO (0) FIXME (0) in 0 files
clang-tidy	✅	0 errors 0 warnings
whitespace check	✅	no whitespace errors found

N.B. These results were obtained from a build of this Pull Request at b1b7f1c after being merged into the base branch at 047cad6.

For more information, please check the job page here.
Build artifacts are deleted after 5 days. If this is not desired, select Keep this build forever on the job page.

new virtual detectors

e451291

FNALbuild added build pending build running and removed build pending labels Feb 2, 2026

FNALbuild added build failed and removed build running labels Feb 2, 2026

FNALbuild added build pending and removed build failed labels Feb 3, 2026

FNALbuild added build running and removed build pending labels Feb 3, 2026

FNALbuild added build finished and removed build running labels Feb 3, 2026

minor fixes

b1b7f1c

FNALbuild added build pending and removed build finished labels Feb 4, 2026

oksuzian requested a review from Copilot February 5, 2026 01:23

Copilot started reviewing on behalf of oksuzian February 5, 2026 01:24 View session

FNALbuild added build running and removed build pending labels Feb 5, 2026

Copilot AI reviewed Feb 5, 2026

View reviewed changes

FNALbuild added build finished and removed build running labels Feb 5, 2026

oksuzian merged commit cb6f310 into Mu2e:Run1B Feb 6, 2026
20 checks passed

	//needed to maintain the consistence with the numbering scheme
	//needed to maintain the consistency with the numbering scheme

	doSurfaceCheck && checkForOverlaps(vd.physical, _config, true);
	doSurfaceCheck && checkForOverlaps(vd.physical, _config, verbosityLevel>0);

		VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
		_helper->locateVolInfo(theDS3) :

	VolumeInfo const & parent = ( _config.getBool("isDumbbell",false) ) ?
	_helper->locateVolInfo(theDS3) :
	VolumeInfo const & parent =

	const double zVDEMC0Front = c.getDouble("zEMC0Front",5830.);
	const double zVDEMC0Front = c.getDouble("zEMC0Front",8695.0);

new virtual detectors #1711

new virtual detectors #1711

Uh oh!

Conversation

sdifalco commented Feb 2, 2026

Uh oh!

FNALbuild commented Feb 2, 2026

Uh oh!

FNALbuild commented Feb 2, 2026

Uh oh!

oksuzian commented Feb 3, 2026

Uh oh!

FNALbuild commented Feb 3, 2026

Uh oh!

FNALbuild commented Feb 3, 2026

Uh oh!

oksuzian commented Feb 5, 2026

Uh oh!

FNALbuild commented Feb 5, 2026

Uh oh!

Copilot AI left a comment

Choose a reason for hiding this comment

Pull request overview

Reviewed changes

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

Copilot AI Feb 5, 2026

Choose a reason for hiding this comment

Uh oh!

FNALbuild commented Feb 5, 2026

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

3 participants