Merged
Conversation
Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45448 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45449 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45450 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45451 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45452 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45453 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45454 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45455 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45456 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45457 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45458 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45459 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45460 3c298f89-4303-0410-b956-a3cf2f4a3e73
…ages Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45461 3c298f89-4303-0410-b956-a3cf2f4a3e73
…om device-tree Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45462 3c298f89-4303-0410-b956-a3cf2f4a3e73
Depending on configuration, disable the LED before writing the trigger and enable it after writing it. Fixes LEDs where the value defaults to 1 Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45463 3c298f89-4303-0410-b956-a3cf2f4a3e73
… issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45464 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45465 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45466 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45467 3c298f89-4303-0410-b956-a3cf2f4a3e73
… them Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45468 3c298f89-4303-0410-b956-a3cf2f4a3e73
The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2; however, the generated kernel config for 3.14 and later kernels ends up with CPU_MIPS32_R1 and CPU_MIPSR1 selected. The generated kernel config for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and CPU_MIPSR2. Modify the default kernel config for mips74k to explicitly select CPU_MIPS32_R2 and CPU_MIPSR2. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Tested-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45469 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45470 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45471 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45472 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45473 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45474 3c298f89-4303-0410-b956-a3cf2f4a3e73
… ohci/ehci Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45475 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45476 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45477 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Luka Perkov <luka@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45478 3c298f89-4303-0410-b956-a3cf2f4a3e73
…tions Signed-off-by: Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45479 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45480 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45481 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45482 3c298f89-4303-0410-b956-a3cf2f4a3e73
… config from interfaces Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45483 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45486 3c298f89-4303-0410-b956-a3cf2f4a3e73
The last line of procd.sh has a reference to procd_add_interface_reload. procd_add_interface_reload doesn't seem to exist. I've removed the reference of it to minimize confusion. Signed-off-by: Eric Schultz <eschultz@prplfoundation.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45487 3c298f89-4303-0410-b956-a3cf2f4a3e73
The new image size is verified by a running tplink device and checked against mktplinkfw source code. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45488 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45489 3c298f89-4303-0410-b956-a3cf2f4a3e73
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45490 3c298f89-4303-0410-b956-a3cf2f4a3e73
The new building code included the rootfs twice when building tplink initramfs images. To make it more readable move initramfs into an own build step Build/mktplinkfw-initramfs. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45491 3c298f89-4303-0410-b956-a3cf2f4a3e73
Hostapd's control file location was changed in 2013, and that has apparently broken the wps button hotplug script in cases where there are multiple radios and wps is possibly configured also for the second radio. The current wps button hotplug script always handles only the first radio. https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/wps-hotplug.sh The reason is that the button hotplug script seeks directories like /var/run/hostapd*, as the hostapd-phy0.conf files were earlier in per-interface subdirectories. Currently the *.conf files are directly in /var/run and the control sockets are in /var/run/hostapd, but there is no subdirectory for each radio. root@OpenWrt:/# ls /var/run/hostapd* /var/run/hostapd-phy0.conf /var/run/hostapd-phy1.conf /var/run/hostapd: wlan0 wlan1 The hotplug script was attempted to be fixed after the hostapd change by r38986 in Dec2013, but that change only unbroke the script for the first radio, but left it broken for multiple radios. https://dev.openwrt.org/changeset/38986/ The script fails to find subdirectories with [ -d "$dir" ], and passes just the only found directory /var/run/hostapd, leading into activating only the first radio, as hostapd_cli defaults to first socket found inthe passed directory: root@OpenWrt:/# hostapd_cli -? ... usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] [-a<path>] \ [-G<ping interval>] [command..] ... -p<path> path to find control sockets (default: /var/run/hostapd) ... -i<ifname> Interface to listen on (default: first interface found in the socket path) Below is a run with the default script and with my proposed solution. Default script (with logging added): ================================== root@OpenWrt:/# cat /etc/rc.button/wps #!/bin/sh if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then for dir in /var/run/hostapd*; do [ -d "$dir" ] || continue logger "WPS activated for: $dir" hostapd_cli -p "$dir" wps_pbc done fi >>>> WPS BUTTON PRESSED <<<<< root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status PBC Status: Timed-out Last WPS result: None root@OpenWrt:/# logread | grep WPS Tue Apr 14 18:38:50 2015 user.notice root: WPS activated for: /var/run/hostapd wlan0 got WPS activated, while wlan1 remained inactive. I have modified the script to search for sockets instead of directories and to use the "-i" option with hostapd_cli, and now the script properly activates wps for both radios. As "-i" needs the interface name instead of the full path, the script first changes dir to /var/run/hostapd to get simply the interface names. Modified script (with logging): =============================== root@OpenWrt:/# cat /etc/rc.button/wps #!/bin/sh if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then cd /var/run/hostapd for dir in *; do [ -S "$socket" ] || continue logger "WPS activated for: $socket" hostapd_cli -i "$socket" wps_pbc done fi >>>> WPS BUTTON PRESSED <<<<< root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# logread | grep WPS Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan0 Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan1 Both radios got their WPS activated properly. I am not sure if my solution is optimal, but it seems to work. WPS button is maybe not that often used functionality, but it might be fixed in any case. Routers with multiple radios are common now, so the bug is maybe more prominent than earlier. The modified script has been in a slightly different format in my community build since r42420 in September 2014. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45492 3c298f89-4303-0410-b956-a3cf2f4a3e73
fixes dbclient login into OpenSSH 6.8p1 error: "Bad hostkey signature" reported on irc, replicated with Arch Linux Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45493 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45494 3c298f89-4303-0410-b956-a3cf2f4a3e73
…d on DTS changes Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45495 3c298f89-4303-0410-b956-a3cf2f4a3e73
…mount_root script to pick up the board name Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45496 3c298f89-4303-0410-b956-a3cf2f4a3e73
…ng issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45497 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45498 3c298f89-4303-0410-b956-a3cf2f4a3e73
- Fix profile name. - Rremove whitespace on board patch. - Refresh patches. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45499 3c298f89-4303-0410-b956-a3cf2f4a3e73
…fig handling issues Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45503 3c298f89-4303-0410-b956-a3cf2f4a3e73
At least the third rgmii port is available on 63169, so assume all are available. Simplifies cpu vs. variant handling. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45504 3c298f89-4303-0410-b956-a3cf2f4a3e73
This should rather be done by passing appropriate platform_data/OF, but should suffice for now. Fixes e.g. GbE ports on BCM963268BU_P300. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45505 3c298f89-4303-0410-b956-a3cf2f4a3e73
Refresh patches to remove the trailing whitespaces caused by an old diffutils version on osx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45506 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45507 3c298f89-4303-0410-b956-a3cf2f4a3e73
…ibs, slightly improves performance and compression Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45508 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45509 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45510 3c298f89-4303-0410-b956-a3cf2f4a3e73
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
No description provided.