Docker certbot-dns-acmedns failed to install

[jakubCF]

Checklist

• Have you pulled and found the error with jc21/nginx-proxy-manager:latest docker image?
  • Yes
• Are you sure you're not using someone else's docker image?
  • Yes
• Have you searched for similar issues (both open and closed)?
  • Yes

Describe the bug
Cannot setup ACME-DNS. Installation of certbot-dns-acmedns failed.
I tried to install it manually inside the container but still failed to install it. After upgrading wheel, setuptools, pip and installing rust compiler still failed to install cryptography (dependency) to finalize installation of certbot-dns-acmedns.

Nginx Proxy Manager Version
v2.9.18

To Reproduce
Steps to reproduce the behavior:
Fresh installation

• go to SSL certificates
• create new
• select use DNS challenge
• provide information and save

Expected behavior
Installation of certbot-dns-acmedns is completed and ACME-DNS setup.

Screenshots

Error: Command failed: pip install certbot-dns-acmedns~=0.1.0 
  error: subprocess-exited-with-error
  
  × pip subprocess to install build dependencies did not run successfully.
  │ exit code: 1
  ╰─> [125 lines of output]
      Collecting setuptools!=60.9.0,>=40.6.0
        Downloading setuptools-63.1.0-py3-none-any.whl (1.2 MB)
           ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.2/1.2 MB 5.2 MB/s eta 0:00:00
      Collecting wheel
        Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB)
      Collecting cffi>=1.12
        Downloading cffi-1.15.1.tar.gz (508 kB)
           ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 508.5/508.5 KB 3.7 MB/s eta 0:00:00
        Preparing metadata (setup.py): started
        Preparing metadata (setup.py): finished with status 'done'
      Collecting setuptools-rust>=0.11.4
        Downloading setuptools_rust-1.4.0-py3-none-any.whl (23 kB)
      Collecting pycparser
        Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB)
           ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 KB 2.5 MB/s eta 0:00:00
      Collecting typing-extensions>=3.7.4.3
        Downloading typing_extensions-4.3.0-py3-none-any.whl (25 kB)
      Collecting semantic-version<3,>=2.8.2
        Downloading semantic_version-2.10.0-py2.py3-none-any.whl (15 kB)
      Building wheels for collected packages: cffi
        Building wheel for cffi (setup.py): started
        Building wheel for cffi (setup.py): finished with status 'error'
        error: subprocess-exited-with-error
      
        × python setup.py bdist_wheel did not run successfully.
        │ exit code: 1
        ╰─> [36 lines of output]
            running bdist_wheel
            running build
            running build_py
            creating build
            creating build/lib.linux-armv7l-3.7
            creating build/lib.linux-armv7l-3.7/cffi
            copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi
            running build_ext
            building '_cffi_backend' extension
            creating build/temp.linux-armv7l-3.7
            creating build/temp.linux-armv7l-3.7/c
            arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o
            c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
             #include 
                      ^~~~~~~~~~
            compilation terminated.
            error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
            [end of output]
      
        note: This error originates from a subprocess, and is likely not a problem with pip.
        ERROR: Failed building wheel for cffi
        Running setup.py clean for cffi
      Failed to build cffi
      Installing collected packages: wheel, typing-extensions, setuptools, semantic-version, pycparser, setuptools-rust, cffi
        Running setup.py install for cffi: started
        Running setup.py install for cffi: finished with status 'error'
        error: subprocess-exited-with-error
      
        × Running setup.py install for cffi did not run successfully.
        │ exit code: 1
        ╰─> [36 lines of output]
            running install
            running build
            running build_py
            creating build
            creating build/lib.linux-armv7l-3.7
            creating build/lib.linux-armv7l-3.7/cffi
            copying cffi/cparser.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/model.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/recompiler.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/api.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/verifier.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/__init__.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/lock.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/pkgconfig.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/vengine_gen.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/error.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/cffi_opcode.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/commontypes.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/setuptools_ext.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/ffiplatform.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/backend_ctypes.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/vengine_cpy.py -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/_cffi_include.h -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/parse_c_type.h -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/_embedding.h -> build/lib.linux-armv7l-3.7/cffi
            copying cffi/_cffi_errors.h -> build/lib.linux-armv7l-3.7/cffi
            running build_ext
            building '_cffi_backend' extension
            creating build/temp.linux-armv7l-3.7
            creating build/temp.linux-armv7l-3.7/c
            arm-linux-gnueabihf-gcc -pthread -DNDEBUG -g -fwrapv -O2 -Wall -g -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2 -fPIC -DFFI_BUILDING=1 -DUSE__THREAD -DHAVE_SYNC_SYNCHRONIZE -I/usr/include/ffi -I/usr/include/libffi -I/usr/include/python3.7m -c c/_cffi_backend.c -o build/temp.linux-armv7l-3.7/c/_cffi_backend.o
            c/_cffi_backend.c:2:10: fatal error: Python.h: No such file or directory
             #include 
                      ^~~~~~~~~~
            compilation terminated.
            error: command 'arm-linux-gnueabihf-gcc' failed with exit status 1
            [end of output]
      
        note: This error originates from a subprocess, and is likely not a problem with pip.
      error: legacy-install-failure
      
      × Encountered error while trying to install package.
      ╰─> cffi
      
      note: This is an issue with the package mentioned above, not pip.
      hint: See above for output from the failure.
      WARNING: You are using pip version 22.0.4; however, version 22.1.2 is available.
      You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.
      [end of output]
  
  note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× pip subprocess to install build dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.
WARNING: You are using pip version 22.0.4; however, version 22.1.2 is available.
You should consider upgrading via the '/usr/bin/python3 -m pip install --upgrade pip' command.

    at ChildProcess.exithandler (node:child_process:399:12)
    at ChildProcess.emit (node:events:526:28)
    at maybeClose (node:internal/child_process:1092:16)
    at Process.ChildProcess._handle.onexit (node:internal/child_process:302:5)

Operating System
RPI4 Bullseye

Additional context

[HaoSs07]

was about to post this, I'm getting the same error at startup when updating from 1.9.14

[Stone-Crown]

I'm getting the same error when use Aliyun

Operating System Linux hi3798mv100 4.4.35_s40 #1 SMP Sun Mar 13 04:35:08 UTC 2022 armv7l armv7l armv7l GNU/Linux

[github-actions]

Issue is now considered stale. If you want to keep it open, please comment 👍

[github-actions]

Issue was closed due to inactivity.