not possible to get image to boot on Raspberry Pi Zero 2 W

[mikaelsundin]

Describe the bug
Released images wont boot on Raspberry Pi Zero 2 W.

To Reproduce

1. Burn image from Open.HD-2.0.12b-buster.zip to sdcard on PC.
2. Move sdcard to Raspberry Pi Zero 2 W'
3. Power on rpi
4. HDMI: Screen is black is black, no raspberrys visibile. No activity led active.

Expected behavior
HDMI output and activivty led:s.

Configuration and debug logs

Hardware:

• Air side
  -- Pi model - Raspberry Pi W 2
  -- Camera(s)
  -- Wifi card(s)
  -- Other hardware
• Ground side
  -- Pi model
  -- Wifi card(s)
  -- Ground Control Station(s)
  -- Hotspots - do you connect you GCS using ethernet, wifi and/or usb tethering
• RC/telemetry uplink
  -- Do you use RC over Open.HD, or a separate rf link?

Client devices (in case of hotspot/tethering issue)

• Device: [e.g. iPhone6]
• OS: [e.g. iOS8.1]
• App - FPV_VR, QGC, and version
• Version [e.g. 22]
• Connection method

Additional context
Raspberry pi latest image boots as expected on the same RPI.
I suspect the Raspberry Pi Zero 2 W need a newer base raspberry pi lite image to work.

[mikaelsundin]

Raspberry Pi Zero 2 W is close to Raspberry 3 in performance.

[MarioFPVdev]

Raspberry Pi Zero 2 W may have similar performance to Raspberry Pi 3A+ but it's a completely different SBC. We are aware that it is not supported by OpenHD project.
Please have a look at the available supported SBC and choose one that suits best for you.

https://openhd.gitbook.io/open-hd/hardware/sbcs

Thank you for your input.

P.S. There is a temporary workaround that enables it to work as Air Unit and can be found in the Telegram chat room.

[mikaelsundin]

Thx for quick response. I will check out the telegram chat.
For me it is only important to have the Air Unit as small as possible. I will probably cut the PCB to get it smaller.

I think i can cut it down to 20x67mm.