We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Add PureSignal wiki page covering the redesigned dashboard UX Walkthrough of both surfaces (transport-bar popover and the SETTINGS → PURESIGNAL dashboard) with screenshots of each section: calibration ring + STATE label, signal flow chips, observed-vs-HW-peak pairing, correction readout, coupler selector (internal for HL2, external for ANAN/Saturn), Auto/Single mode, run/reset, and the timing + hardware panes underneath. Includes a STATE vs CORRECTING explainer for the most common point of confusion: STATE is the calcc inner-loop step (cycles continuously in Auto), CORRECTING is the orthogonal info[14] flag that means predistortion is currently shaping TX. They're independent. Adds per-board notes (HL2 internal coupler default, P2 external coupler wiring, HW peak factory values) and an updated troubleshooting section. The legacy PureSignal-on-Protocol-2 page now redirects to the new page at the top — kept around so older issue / PR links still resolve. The sidebar and Home links point at the new page.
docs: prefix bare "Zeus" with "OpenHPSDR" across user-facing pages Normalises user-facing prose to read "OpenHPSDR Zeus". Mobile.md was already prefixed ("Openhpsdr-Zeus") and is now aligned with the rest of the wiki. Code identifiers (Zeus.Server, Zeus.slnx, Zeus.Dsp, Zeus.Protocol1/2, Zeus.Contracts), filesystem paths (~/.local/share/Zeus, Zeus.app), and installer filenames (Zeus-X.Y.Z-...) are left as-is.
wiki: add PureSignal (P2 / ANAN G2) operator guide Operator-facing walkthrough of PureSignal adaptive predistortion on Protocol 2 boards (ANAN G2, G2 MkII, Saturn / Saturn-XDMA). Covers hardware requirements (coupler + Bypass coax), per-control reference, first-time calibration walkthrough, what 'good' looks like in the log and on the air, troubleshooting common rack symptoms (silent feedback bar, runaway AutoAttenuate, time-alignment issues, post-reconnect state loss), per-board hw_peak table, and references to Pratt's PureSignal paper / Thetis / pihpsdr / WDSP source. Feature lands on develop with PR #103 (TX panadapter + PureSignal foundation + AutoAttenuate convergence) and PR #104 (reconnect-state- resync). Rack-verified G2 MkII / 80m / 1300W / fw 2.7b41. Adds the page to the sidebar under Transmit and the Home index.