v1.01

What's Changed

• Added zero build configuration by @Tails86 in #173

Full Changelog: v1.00...v1.01

The following table describes each file in this release. Please note that the LED will not be functional if any of the W variants of the hardware is used.

Binary	Hardware Mode	Compatibility	Notes
host-1p.uf2	Host	pico, pico-w, and RP2040-Zero	only A active
host-2p.uf2	Host	pico, pico-w, and RP2040-Zero	A and B active
host-4p.uf2	Host	pico and pico-w	A, B, C, and D active
zero_host-4p.uf2	Host	RP2040-Zero	Host mode configuration similar to the above, but C outputs are moved to gpio 2 & 3, and D outputs are moved to gpio 4 & 5
pico2_host-1p.uf2	Host	pico2 and pico2-w	only A active
pico2_host-2p.uf2	Host	pico2 and pico2-w	A and B active
pico2_host-4p.uf2	Host	pico2 and pico2-w	A, B, C, and D active
client-with-usb-host.uf2	Client	pico, pico-w, and RP2040-Zero	supporting a single Dualshock4 controller connected to the USB port
pico2_client-with-usb-host.uf2	Client	pico2 and pico2-w	supporting a single Dualshock4 controller connected to the USB port