Prebuilt Dream Pico Port Resources

I created a shop for those who don't have the skill/resources/time to build their own device. This page is a quick start guide for those products. All software and designs are open-source under the MIT license.

Updating Firmware

1. Visit https://github.com/OrangeFox86/DreamPicoPort/releases
2. Download the latest host.uf2 file
3. If the Dream Pico Port is connected to the PC, unplug it
4. Hold the program button while plugging in the Dream Pico Port to the PC
5. Drag and drop the host.uf2 file to the RPI-RP2 drive that should pop up; programming should take less than 10 seconds to complete

Using with Flycast

Follow the instructions here. You may ignore hardware setup.

Ribbon Variant

See here for an example of how to use the ribbon variant. The supplied ribbon cable is more flexible and longer which may help with placement in the case. However if it's desired, the ribbon cable within the Dreamcast may be used instead of the supplied one.