-
-
Notifications
You must be signed in to change notification settings - Fork 89
Hardware Versions
akuker edited this page Jan 17, 2022
·
55 revisions
The table below shows the known versions of the RaSCSI hardware, and whether it has been tested with the "68kmla" version of the RaSCSI software.
| RaSCSI Hw Version | Connection Type | Tested and working? | Schematic | Gerbers | Comments |
|---|---|---|---|---|---|
| fran-cap 1.6d |
STANDARD (Target Only) |
Partial | Eagle | N/A | Requires re-mapping of GPIO pins - doesn't match original GIMONS design |
| akuker 1.5 |
STANDARD (Target Only) |
Yes - with Fix |
PDF KiCad |
Gerbers | Cut/Jump required to get this board to work |
| akuker 1.6 |
STANDARD (Target Only) |
Not Tested |
PDF KiCad |
Gerbers | Same as 1.5, but with fix for Issue 10. *Should* work, but is currently untested. |
| akuker 2.1 |
FULLSPEC (Initiator or Target) |
NO |
PDF KiCad |
Gerbers | Several issues, including the connector being flipped. Not recommended for ANYONE to use |
| akuker 2.2 |
FULLSPEC (Initiator or Target) |
YES |
PDF KiCad |
Gerbers |
No major issues 5v/3v silkscreen captions swapped |
| akuker 2.3 |
FULLSPEC (Initiator or Target) |
Yes |
PDF KiCad |
Gerbers | No known issues |
| akuker 2.4 |
FULLSPEC (Initiator or Target) |
Yes |
PDF KiCad |
Gerbers | Added optional high-density connector for PowerBooks and Berg power connector. |
The RaSCSI Zero is a compact version of the RaSCSI board that is intended for use with the Raspberry Pi Zero family. Differences from the Full Sized RaSCSI include:
- Only has DB-25 connector. No ribbon cable connector.
- Termination is always enabled.
- Smaller board size (same size as Raspberry Pi Zero)
| RaSCSI Hw Version | Connection Type | Tested and working? | Schematic | Gerbers | Comments |
|---|---|---|---|---|---|
| akuker RaSCSI Zero 1.0 |
FULLSPEC (Initiator or Target) |
YES |
PDF KiCad |
Gerbers | No major issues. |