i2pd doesn't start - Linux Mint 22 Cinnamon

[albotroz]

Run I2Pd by executing ./i2pd from i2pd folder

Doesn't start. Nothing happens. No error message.
I2PdBrowserPortable_e905b92-linux

System:
  Kernel: 6.8.0-47-generic arch: x86_64 bits: 64 compiler: gcc v: 13.2.0 clocksource: tsc
  Desktop: Cinnamon v: 6.2.9 tk: GTK v: 3.24.41 wm: Muffin v: 6.2.0 vt: 7 dm: LightDM v: 1.30.0
    Distro: Linux Mint 22 Wilma base: Ubuntu 24.04 noble
Machine:
  Type: Laptop System: LENOVO product: 20UES2HN00 v: ThinkPad T14 Gen 1
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: LENOVO model: 20UES2HN00 v: SDK0J40697 WIN serial: <superuser required>
    part-nu: LENOVO_MT_20UE_BU_Think_FM_ThinkPad T14 Gen 1 uuid: <superuser required> UEFI: LENOVO
    v: R1BET80W(1.49 ) date: 06/18/2024
Battery:
  ID-1: BAT0 charge: 51.0 Wh (99.0%) condition: 51.5/50.5 Wh (101.9%) volts: 12.9 min: 11.6
    model: LGC 5B10W139 type: Li-poly serial: <filter> status: full cycles: 76
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse B330/M330/M331 serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: 6-core model: AMD Ryzen 5 PRO 4650U with Radeon Graphics bits: 64 type: MT MCP smt: enabled
    arch: Zen 2 rev: 1 cache: L1: 384 KiB L2: 3 MiB L3: 8 MiB
  Speed (MHz): avg: 1631 high: 2594 min/max: 1400/2100 boost: enabled cores: 1: 1298 2: 1298
    3: 2594 4: 2594 5: 1298 6: 1251 7: 1396 8: 1397 9: 2395 10: 1428 11: 1235 12: 1397
    bogomips: 50304
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
  Device-1: AMD Renoir [Radeon RX Vega 6 ] vendor: Lenovo driver: amdgpu v: kernel arch: GCN-5
    pcie: speed: 8 GT/s lanes: 16 ports: active: eDP-1 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 08:00.0
    chip-ID: 1002:1636 class-ID: 0300 temp: 49.0 C
  Device-2: Bison Integrated Camera driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
    bus-ID: 2-2:2 chip-ID: 5986:2130 class-ID: 0e02
  Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.6 driver: X: loaded: amdgpu
    unloaded: fbdev,modesetting,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22") s-diag: 582mm (22.93")
  Monitor-1: eDP-1 mapped: eDP model: LG Display 0x05fa res: 1920x1080 hz: 60 dpi: 158
    size: 309x174mm (12.17x6.85") diag: 355mm (14") modes: max: 1920x1080 min: 640x480
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi device: 1 drv: swrast
    surfaceless: drv: radeonsi x11: drv: radeonsi inactive: gbm,wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.0.9-0ubuntu0.2 glx-v: 1.4
    direct-render: yes renderer: AMD Radeon Graphics (radeonsi renoir LLVM 17.0.6 DRM 3.57
    6.8.0-47-generic) device-ID: 1002:1636
Audio:
  Device-1: AMD Renoir Radeon High Definition Audio vendor: Lenovo driver: snd_hda_intel v: kernel
    pcie: speed: 8 GT/s lanes: 16 bus-ID: 08:00.1 chip-ID: 1002:1637 class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Lenovo driver: snd_rn_pci_acp3x
    v: kernel pcie: speed: 8 GT/s lanes: 16 bus-ID: 08:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: Lenovo driver: snd_hda_intel v: kernel pcie:
    speed: 8 GT/s lanes: 16 bus-ID: 08:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.8.0-47-generic status: kernel-api
  Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Lenovo RTL8111/8168/8411 driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1
    port: 3400 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp2s0f0 state: down mac: <filter>
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: speed: 5 GT/s lanes: 1
    bus-ID: 03:00.0 chip-ID: 8086:2723 class-ID: 0280
  IF: wlp3s0 state: up mac: <filter>
  Device-3: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Lenovo RTL8111/8168/8411 driver: r8169 v: kernel pcie: speed: 2.5 GT/s lanes: 1
    port: 2000 bus-ID: 06:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: enp6s0 state: down mac: <filter>
  IF-ID-1: wgivpn state: unknown speed: N/A duplex: N/A mac: N/A
  IF-ID-2: wwan0 state: down mac: N/A
Bluetooth:
  Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1
    bus-ID: 6-4:4 chip-ID: 8087:0029 class-ID: e001
  Report: hciconfig ID: hci0 rfk-id: 4 state: up address: <filter> bt-v: 5.2 lmp-v: 11
    sub-v: 2184 hci-v: 11 rev: 2184 class-ID: 7c010c
Drives:
  Local Storage: total: 1.88 TiB used: 771.59 GiB (40.2%)
  ID-1: /dev/nvme0n1 vendor: Western Digital model: WD BLACK SN850X 2000GB size: 1.82 TiB
    speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 620361WD temp: 45.9 C scheme: GPT
  ID-2: /dev/sda vendor: SanDisk model: Cruzer Fit size: 58.23 GiB type: USB rev: 2.0
    spd: 480 Mb/s lanes: 1 tech: N/A serial: <filter> fw-rev: 1.27 scheme: MBR
Partition:
  ID-1: / size: 1.79 TiB used: 528.69 GiB (28.9%) fs: ext4 dev: /dev/dm-1 mapped: vgmint-root
  ID-2: /boot size: 1.61 GiB used: 287 MiB (17.4%) fs: ext4 dev: /dev/nvme0n1p2
  ID-3: /boot/efi size: 511 MiB used: 6.1 MiB (1.2%) fs: vfat dev: /dev/nvme0n1p1
Swap:
  ID-1: swap-1 type: partition size: 1.91 GiB used: 811 MiB (41.5%) priority: -2 dev: /dev/dm-2
    mapped: vgmint-swap_1
USB:
  Hub-1: 1-0:1 info: full speed or root hub ports: 1 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Hub-2: 2-0:1 info: hi-speed hub with single TT ports: 2 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 2-2:2 info: Bison Integrated Camera type: video driver: uvcvideo interfaces: 2
    rev: 2.0 speed: 480 Mb/s lanes: 1 power: 500mA chip-ID: 5986:2130 class-ID: 0e02
  Hub-3: 3-0:1 info: super-speed hub ports: 2 rev: 3.0 speed: 5 Gb/s lanes: 1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-4: 4-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 4-2:2 info: Logitech Unifying Receiver type: mouse,HID
    driver: logitech-djreceiver,usbhid interfaces: 2 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 98mA
    chip-ID: 046d:c52f class-ID: 0300
  Hub-5: 5-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s lanes: 1 chip-ID: 1d6b:0003
    class-ID: 0900
  Hub-6: 6-0:1 info: hi-speed hub with single TT ports: 4 rev: 2.0 speed: 480 Mb/s lanes: 1
    chip-ID: 1d6b:0002 class-ID: 0900
  Device-1: 6-2:6 info: SanDisk Cruzer Fit type: mass storage driver: usb-storage interfaces: 1
    rev: 2.0 speed: 480 Mb/s lanes: 1 power: 200mA chip-ID: 0781:5571 class-ID: 0806 serial: <filter>
  Device-2: 6-3:2 info: Synaptics Prometheus MIS Touch Fingerprint Reader type: <vendor specific>
    driver: N/A interfaces: 1 rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 06cb:00bd
    class-ID: ff00 serial: <filter>
  Device-3: 6-4:4 info: Intel AX200 Bluetooth type: bluetooth driver: btusb interfaces: 2
    rev: 2.0 speed: 12 Mb/s lanes: 1 power: 100mA chip-ID: 8087:0029 class-ID: e001
  Hub-7: 7-0:1 info: super-speed hub ports: 2 rev: 3.1 speed: 10 Gb/s lanes: 1 chip-ID: 1d6b:0003
    class-ID: 0900
Sensors:
  System Temperatures: cpu: 52.0 C mobo: N/A gpu: amdgpu temp: 50.0 C
  Fan Speeds (rpm): fan-1: 4000 fan-2: 4000
Repos:
  Packages: 2837 pm: dpkg pkgs: 2792 pm: flatpak pkgs: 45
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/element-io.list
    1: deb [signed-by=/usr/share/keyrings/element-io-archive-keyring.gpg] https: //packages.element.io/debian/ default main
  Active apt repos in: /etc/apt/sources.list.d/ivpn.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/ivpn-archive-keyring.gpg] https: //repo.ivpn.net/stable/mint ./generic main
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb https: //mirrors.cicku.me/linuxmint/packages wilma main upstream import backport
    2: deb http: //artfiles.org/ubuntu.com noble main restricted universe multiverse
    3: deb http: //artfiles.org/ubuntu.com noble-updates main restricted universe multiverse
    4: deb http: //artfiles.org/ubuntu.com noble-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ noble-security main restricted universe multiverse
  Active apt repos in: /etc/apt/sources.list.d/signal-messenger.list
    1: deb [arch=amd64 signed-by=/usr/share/keyrings/signal-desktop-keyring.gpg] https: //updates.signal.org/desktop/apt xenial main
  Active apt repos in: /etc/apt/sources.list.d/unit193-encryption-noble.list
    1: deb [signed-by=/etc/apt/keyrings/unit193-encryption-noble.gpg] https: //ppa.launchpadcontent.net/unit193/encryption/ubuntu noble main
  Active apt repos in: /etc/apt/sources.list.d/vscode.list
    1: deb [arch=amd64,arm64,armhf] https: //packages.microsoft.com/repos/code stable main
  Active apt repos in: /etc/apt/sources.list.d/winehq-noble.sources
    1: deb [arch=amd64 i386] https: //dl.winehq.org/wine-builds/ubuntu noble main
Info:
  Memory: total: 44 GiB note: est. available: 44.81 GiB used: 18.96 GiB (42.3%)
  Processes: 524 Power: uptime: 3d 2h 15m states: freeze,mem,disk suspend: deep wakeups: 0
    hibernate: platform Init: systemd v: 255 target: graphical (5) default: graphical
  Compilers: gcc: 13.2.0 Client: Cinnamon v: 6.2.9 inxi: 3.3.34

[mittwerk]

And how do you understand that it does not work? check http://localhost:7070/

[albotroz]

And how do you understand that it does not work? check http://localhost:7070/

Unable to connect
Firefox can’t establish a connection to the server at localhost:7070.

    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer’s network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the web.

[cora32]

If it's not a fresh start, then it is parsing its ./.i2pd directory (especially netDb?) before starting webUI. Just wait until it loads or remove ./.i2pd.

[albotroz]

No, it doesn't work. There was/ is no .i2pd folder.

[r4sas]

i2pd script in i2pd folder did not installs i2pd and not starting it if it is present in system. You must install it yourself using our PPA. Please refer to documentation: https://i2pd.readthedocs.io/en/latest/user-guide/install/#ubuntu.

TODO: update linux usage documentation.

[menin99]

This problem is still going on

[Dr-Hex]

i2pd script in i2pd folder did not installs i2pd and not starting it if it is present in system. You must install it yourself using our PPA. Please refer to documentation: https://i2pd.readthedocs.io/en/latest/user-guide/install/#ubuntu.

@r4sas there is no such logic in https://github.com/PurpleI2P/i2pdbrowser/blob/473cdfe87a00e10db68939f36e65fd8613c4a555/linux/i2pd/i2pd
It doesn't check for installed i2pd atm. Also, the path is "hardcoded" to ./ current directory.
Does this linux version ever worked, considering it expects ./i2pd-amd64 to appear in current directory by some magic way?