This repository was archived by the owner on Aug 14, 2021. It is now read-only.
5.VIRTUAL IMPLEMENTATION
| Sl.no | Name of component | Material used | Specifications | Quantity |
|---|---|---|---|---|
| 1 | LCD Screen | - | 16 characters*2 lines | 1 |
| 2 | Arduino board | - | AT megaz328@Mhz processor | 1 |
| 3 | LED Bulbs | - | 1 Green and 2 Red color of 5V | 3 |
| 4 | Resistor | - | 5-1kohms and 2-10kohms | 6 |
| 5 | Breadboard | ABS plastic | GL-12 with 800 points(solderless) | 1 |
| 6 | Push button | - | Electronic 2-pin tactile switch | 2 |
| 7 | Battery | - | 9V Battery | 1 |
| 8 | H-Bridge Motor driver | - | L298 type | 1 |
| 9 | Stepper motor | - | NEMA-17 | 1 |
| 10 | Support holder | Plastic/Metal | 40cm*40cm | 10 |
| 11 | Support rods | Metal | 45cm*45cm | 2 |
| 13 | Mounting holder | Metal/Plastic | Adjustable | 5 |
| 12 | Mobile holders | Metal/Plastic | Adjustable | 2 |
| 14 | Motor case | Metal/Plastic | 10cm*10cm | 2 |
| 15 | Chess Board | Wood | 32cm32cm5mm | 1 |
| 16 | Chess-board box | Wood | 40cm40cm | 1 |
| 17 | Chess-pieces | Wood with metal base | 3cm in height and 1cm in width | 32 |
| 18 | Servo Screw | - | 2*9/16 | 10 |
| 19 | Wood Screw | - | TYPE-5 (1/16") | 15 |
| 20 | Component/Jumper wires | - | Multi-colored[Male-Male],[Female-Female],[Male-Female] | 40+40+40=120 |
| 21 | Electromagnet | - | 5V, 50N (25mm in lenght and 50mm in height | 1 |
| 22 | Pulley | Light weight steel | 2cm in diameter and 25gm in weight | 2 |
