Player modes

Persist mode

Persist allows you to use a single-use command such as /cprivate or /cinfo multiple times in a row, allowing you to very quickly protect a room of chests, doors or any other block.

• Command: /lwc mode persist or /cpersist (first time for the activation and a second time to deactivate it = toggle)

• Permission: lwc.mode.persist

Nolock mode

This mode will override the auto protection: if you activate it, all placed must be manually protected, unless the "autoprotect" option in the core.yml for this block.

• Command: /lwc mode nolock or /cnolock (first time for the activation and a second time to deactivate it = toggle)

• Permission: lwc.mode.nolock

Nospam mode

By default, if a player place a block and the "autoprotect" option for this block is activated in the core.yml, he gets a message about this new protection. This may mass in the chat, so these messages are deactivatable with this mode.

• Command: /lwc mode cnospam or /nospam (first time for the activation and a second time to deactivate it = toggle)

• Permission: lwc.mode.nospam

Droptransfer mode

The Droptransfer mode is similar to the Magnet Protection Flag but world-wide: When you drop an items from your inventory to the ground, it will be transferred to the chest. If the chest is full, you will be notified and the items that did not fit will be returned to you. It will only transfer to a chest in the current world. There is no limit to the range.

Select A Target Inventory

To use the Droptransfer mode, firstly you must select a target inventory block. In this inventory block the items will drop in them. Logging out will clear your drop transfer target.

• Command: /lwc mode droptransfer select or /cdroptransfer select

Activate / Deactivate The Droptransfer

With this command you activate and deactivate the mode for you. After the OFF-command you can re-enable it without re-selecting your chest.

• Command: /lwc mode droptransfer <on | off> or /cdroptransfer <on | off>

Show Droptransfer Status

With this command you can view the current status of the Droptransfer mode.

• Command: /lwc mode droptransfer status or /cdroptransfer status

• Permission: lwc.mode.droptransfer