Cartridge Lab

Cartridge Lab

Cartridge Lab lets the Mac and the real handheld work together. Instead of asking a generic USB reader to guess what is on the cartridge, SwanSong loads a small open-source service on a WonderSwan Color or SwanCrystal and lets the console read its own cartridge bus.

From one native window you can inspect an inserted cartridge, make a checksum-verified ROM backup, back up SRAM or EEPROM, and restore an exact-size save with confirmation on both screens.

Cartridge Lab is included in SwanSong 0.5.0.

What you need

• a WonderSwan Color or SwanCrystal;
• a 3.3 V ExtFriend-compatible USB serial adapter;
• a data-capable USB cable and a Mac running SwanSong;
• Yokoi Boot installed on the console; and
• a cartridge and save data you own or are authorized to handle.

Never connect the WonderSwan EXT port to a PC RS-232 socket. RS-232 voltage levels are not the 3.3 V serial connection this workflow expects.

The original monochrome WonderSwan does not have the Color custom-splash area used by Yokoi Boot and is not supported by this workflow.

Back up a cartridge

1. Open Hardware → Open Cartridge Lab….
2. Connect the ExtFriend-compatible adapter and choose Refresh Devices if it does not appear immediately.
3. Insert the cartridge before powering on the WonderSwan.
4. Choose Connect & Load Service, then power on the console when SwanSong asks.
5. Review the detected console, cartridge size, and save type.
6. Choose the ROM or save backup action and select a destination.

SwanSong refuses to replace an existing destination. The transfer is written to a temporary sibling, checked as it arrives, promoted only when complete, and reported with its byte count and SHA-256. A partial transfer never becomes the file you asked to save.

Cartridge Lab can read cartridge mask ROM plus supported SRAM or EEPROM. It does not offer to rewrite retail game ROM.

Restore a save

Restoring save data is deliberately harder than reading it:

1. Make a fresh save backup first.
2. Choose Restore Save… and select the local file.
3. Confirm the destructive action on the Mac.
4. Hold A+B on the WonderSwan when Yokoi Cart Service asks.
5. Keep the console and adapter connected while SwanSong writes and reads the save back.

The selected file must exactly match the detected cartridge's SRAM or EEPROM size. The service keeps the write disarmed until the physical A+B confirmation, and SwanSong verifies the complete result after writing. A mismatch or lost connection is a failure, not a “probably finished” result.

Install Yokoi Boot

A completely stock console cannot receive its first loader through EXT alone. The first Yokoi Boot installation needs one of these bootstrap paths:

• a compatible SD-based flash cartridge that can launch .wsc files and provides at least 8 KiB of SRAM;
• a WonderWitch route; or
• direct 93C86 EEPROM programming.

For the flash-cartridge route:

1. Open Install Yokoi Boot in Cartridge Lab.
2. Choose the folder the flash cartridge's own SD menu browses.
3. SwanSong adds Yokoi Boot Installer.wsc and reads it back.
4. Eject the SD card in Finder, return it to the cartridge, and launch the installer from that cartridge's menu.
5. Follow the on-console backup and A+B confirmation flow.
6. Keep the installer cartridge unchanged afterward: its SRAM contains the internal-EEPROM recovery backup.

If a different file already uses the installer name, SwanSong chooses a numbered name instead of overwriting it. Copying this installer does not make an arbitrary cartridge writable; the existing flash-cartridge menu must already be able to launch it.

Privacy and ownership

Cartridge Lab makes no network request. Serial discovery stays on the Mac. ROM and save backups are written only to destinations you choose, and restore reads only the save file you select. The installer-card workflow checks only enough of the chosen folder to avoid a naming collision and verify its own write; it does not scan or upload the card's games or saves.

The bundled Yokoi Boot installer and Yokoi Cart Service are separately licensed open-source WonderSwan programs, not original Bandai firmware or game data. Their exact payload identity, license, notice, and corresponding-source location are checked as part of app packaging and release.

See the privacy policy, installation guide, and source provenance for the complete boundaries.