Tree supports generated on angles over threshold

[tflori]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.3.0

Operating System (OS)

Windows

OS Version

tested on Windows 11 / Linux

Additional system information

tested on multiple systems with AMD CPUs

Printer

Bambu Lab A1

How to reproduce

1. open the 3mf file
2. slice the active plate

I'm trying to print KLP-Lampe keycaps on 106° rotation as I think that's the sweet spot but see self:

Actual results

It adds supports to the surface of the keys which are definetly not less than 20" as defined:

Expected results

to add support only where needed. I found out that it is "better" when rotating the keycaps by 45° but this adds some "inaccuracy" that I don't want - also it adds only supports to one of the sides but the keycaps are symetrical and that does not make sense either

Project file & Debug log uploads

keycaps-print.zip

debug_Mon_Apr_21_22_33_09_21284.log.zip

Checklist of files to include

• Log file
• Project file

Anything else?

No response

[discip]

Yes confirmed, same here.

@tflori
As a workaround:

[tflori]

yes, I realized that too. the support drawing works as expected and shows the overhangs correct. but that's boring for 45 keys 😄

[discip]

Since most of them seem to be identical, you don't need to do every single one.
Just do the ones that are different, and then create the appropriate number of clones. 😊

[tflori]

so duplicating copies the support information. good to know 👍

[github-actions]

Orca bot: this issue is stale because it has been open for 90 days with no activity.

[github-actions]

Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale.