JSON Interface

The key/value pairs are not absolutely necessary, any key/value pairs can be combined in post requests. Except there is a valve number defined.

Valves

• Set valves -

  • URL : http://ip/setvalve Request Method: POST

  • Payload : "valve": valvenr,"value": value

  • Example : { "valve": 1, "value": 21 }

• Set tValue -

  • URL : http://ip/setvalve Request Method: POST

  • Payload : {"valve": valvenr,"ctrlValue": value}

  • Example : { "valve": 1, "ctrlValue": 21.2 }

• Set tTarget -

  • URL : http://ip/setvalve Request Method: POST

  • Payload : {"valve": valvenr,"ctrlValue": value,"ctrlTarget": value}

  • Example : { "valve": 1, "ctrlTarget": 22 }

  • Example : { "valve": 1, "ctrlValue": 21.2, "ctrlTarget": 22 }

Please note that tTarget and tValue json posts only works if the value and target source is set to json in the valve control section

• Get valves -
  • URL : http://ip/valves Request Method: GET
  • Response : { "valves": [ { "idx": 1, "name": "Wohn", "state": 1, "pos": 2, "meanCur": 19, "targetPos": 2, "tTarget": 21.0, "tValue": 18.0 } ] }

Valves control config

• Set valve control config -

  • URL : http://ip/valvesctrlconfig Request Method: POST

  • Payload : {"valves":["no":4,"active":0,"allow":1,"tSource":1,"vSource":3,"link":0,"offset":0,"scheme":0,"ti":4,"ts":900,"xp":24,"ki":0.01,"startAZ":0,"endAZ":100]}

  Regarding to the size limit you can send max. 3 items in the array per post

• Set valve control config of all valves

  • URL : http://ip/valvesctrlconfig Request Method: POST
  • Payload : {"active":0,"allow":1,"tSource":1,"vSource":3,"scheme":0,"startAZ":0,"endAZ":100}

  Please note that here is no array and no valve number defined