Reading simos 19.6 ea888 gen4 dnfb

[DEN3535]

In the chip firmware version 1.03 it already reads many parameters of simos 19.6, but not all!!! For example, there is no data on otkvtam. Where "0" there is no data. Obviously, the channel addresses are incorrect. Can you tell me how to change the pid list so that it reads all channels and data?

[DEN3535]

Where "0" there is no data. Obviously, the channel addresses are incorrect.

[DEN3535]

[Switchleg1]

The issue is not an issue with the esp32 firmware. Some of the addresses and formulas in Simos 19 have changed. Using the latest ST with the default simos 19 pid lists that are internal to the application(use reset in settings window to load default pid list) will display all but 1 or 2 i am still looking for.

…

On Sat, Aug 31, 2024 at 8:11 AM DEN3535 ***@***.***> wrote: Screenshot_20240831_165538_com.app.simostools.jpg (view on web) <https://github.com/user-attachments/assets/381511d8-39a5-4841-8500-6fe3694cfc10> — Reply to this email directly, view it on GitHub <#13 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AVIWVJ2CZDZ2EU3SAG2ZETTZUHFJZAVCNFSM6AAAAABNN45NQKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRSHEYDQNZZGA> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[DEN3535]

It seems like all parameters worked! By what parameters have you not found addresses yet?

[DEN3535]

Is it also possible to flash and upload calibrations to simos 19.6?

[DEN3535]

[Switchleg1]

The hpfp spill valve percentage doesn't seem to read for some reason. No there is no flash support for simos 19

…

On Mon, Sep 2, 2024, 5:02 AM DEN3535 ***@***.***> wrote: It seems like all parameters worked! By what parameters have you not found addresses yet? — Reply to this email directly, view it on GitHub <#13 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AVIWVJ22SMWGK4TP7NAULXDZURAWBAVCNFSM6AAAAABNN45NQKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGMRUGQ2TANRWGQ> . You are receiving this because you commented.Message ID: ***@***.***>

[DEN3535]

does not erase errors in simos 19.6!

[DEN3535]

[DEN3535]

Mk8!

[DEN3535]

Does not erase engine fault codes!!!

[DEN3535]