Anyone tried AX750? I'm close...

[modemmike]

How I installed it (needed to use the sd card for space)

opkg update &&
opkg install block-mount kmod-fs-ext4 kmod-usb-storage e2fsprogs && \

umount /dev/sda1
mkfs.ext4 /dev/sda1
mkdir -p /mnt/sda1
mount /dev/sda1 /mnt/sda1
cp -a -f /overlay/. /mnt/sda1
cat << EOF > /etc/config/fstab
config 'global'
option anon_swap '0'
option anon_mount '0'
option auto_swap '1'
option auto_mount '1'
option delay_root '5'
option check_fs '0'

config 'mount'
option target '/overlay'
option device '/dev/sda1'
option fstype 'ext4'
option options 'rw,sync'
option enabled '1'
option enabled_fsck '0'
EOF
/etc/init.d/fstab enable
reboot

opkg install ar xz xz-utils tar luci-compat libcap wget-ssl

Do the installation steps outlined in the [video](Do the installation steps outlined in the video) (uploaded the ipk etc).

From the log:

Log Reset & Speedify Update/Install
Repository URL:https://apt.connectify.me
Repository Ubuntu packages URL:https://apt.connectify.me/dists/speedify/main/binary-armhf/Packages
Latest Version:14.8.5-11916
Speedify package URL:https://apt.connectify.me/pool/main/s/speedify/speedify_14.8.5-11916_armhf.deb
Speedify UI package URL:https://apt.connectify.me/pool/main/s/speedifyui/speedifyui_14.8.5-11916_armhf.deb
Installing GNU C Library
Removing cache if it exists at /tmp/spddw
Downloading Speedify...
Downloading Speedify UI...
Extracting Speedify...
Extracting Speedify UI...
Deleting installation files...
Updating OpenWrt configration and starting Speedify...
Speedify is now installed, user interface is at http:///spdui/?wsPort=9331

Unfortunately, all I get for the SpeedifyUI is

I like this router because it's small, low power and can be found used for less than $50. My plan was to combine the onboard lte, add a USB modem and then also mix in wifi when available.

[TalalMash]

GL.iNet Slate AR750 or the Spitz? The non AX versions use MIPS processor which isn't supported by Speedify.

[modemmike]

Yep, Mips... that solves that. Thank you. Darn! Mine is MIPS... GL iNet x750 I have the original version, not the version 2.

Got any suggestions for small package and low power?

[TalalMash]

The Wi-Fi AX versions are all ARM, the Mediatek GL.iNet series may use less power than the qualcomm and is cheaper.
I've had a working report from a Spitz AX user.

[modemmike]

The $500 Spitz? Ya, thats a bit rich for me.
GL-E750V2 is a nice package for my use case and is ARM, worth a shot you think?

[TalalMash]

Yikes yeah that's a lot, Banana Pi R3 Mini has a PCIe slot for a modem that may be cheaper.
The Mudi(v2) is also MIPS.

A Pi Zero 2 with modules also works up to 80 Mbit.

[modemmike]

The Pi Zero is interesting. Thank you for pointing me in the right direction.

[TalalMash]

Speedify mentioned that they are going to release MIPS support soon, so the old Slate and tons of other routers could probably work well at low/streaming speeds.

[modemmike]

IDK if the processor in the AX750 can handle it but that would be cool.

[modemmike]

Did they mention a potential ETA? This AX3000 is power hungry, relatively speaking. I'm tweaking the settings and getting that lower but it's also twice the size.