crypto: sa2ul: fix kernel oops freeing unallocated context memory #1
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
A kernel oops can be triggered when freeing a SA2UL context where
ctx->sc_phys was never initialized. sa_free_ctx_info() unconditionally
calls dma_unmap_single() on this address, which may be invalid and
results in a data abort.
Example stack trace:
Unable to handle kernel paging request at virtual address ffffffff80000140
pc : dcache_inval_poc+0x28/0x58
lr : arch_sync_dma_for_cpu+0x34/0x50
Call trace:
dma_unmap_page_attrs
sa_free_ctx_info [sa2ul]
sa_cipher_cra_exit [sa2ul]
crypto_skcipher_exit_tfm
crypto_destroy_tfm
Fix this by validating ctx->sc_phys before calling dma_unmap_single(),
ensuring only allocated DMA memory is unmapped.
Cc: stable@vger.kernel.org # 6.12+
Signed-off-by: Shahbaz Ali <shahbaz.ali@non.se.com>
praneethbajjuri
pushed a commit
that referenced
this pull request
Feb 10, 2026
[ Upstream commit e9acda5 ] Fix a use-after-free which happens due to enslave failure after the new slave has been added to the array. Since the new slave can be used for Tx immediately, we can use it after it has been freed by the enslave error cleanup path which frees the allocated slave memory. Slave update array is supposed to be called last when further enslave failures are not expected. Move it after xdp setup to avoid any problems. It is very easy to reproduce the problem with a simple xdp_pass prog: ip l add bond1 type bond mode balance-xor ip l set bond1 up ip l set dev bond1 xdp object xdp_pass.o sec xdp_pass ip l add dumdum type dummy Then run in parallel: while :; do ip l set dumdum master bond1 1>/dev/null 2>&1; done; mausezahn bond1 -a own -b rand -A rand -B 1.1.1.1 -c 0 -t tcp "dp=1-1023, flags=syn" The crash happens almost immediately: [ 605.602850] Oops: general protection fault, probably for non-canonical address 0xe0e6fc2460000137: 0000 [#1] SMP KASAN NOPTI [ 605.602916] KASAN: maybe wild-memory-access in range [0x07380123000009b8-0x07380123000009bf] [ 605.602946] CPU: 0 UID: 0 PID: 2445 Comm: mausezahn Kdump: loaded Tainted: G B 6.19.0-rc6+ #21 PREEMPT(voluntary) [ 605.602979] Tainted: [B]=BAD_PAGE [ 605.602998] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 605.603032] RIP: 0010:netdev_core_pick_tx+0xcd/0x210 [ 605.603063] Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 3e 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8b 6b 08 49 8d 7d 30 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 25 01 00 00 49 8b 45 30 4c 89 e2 48 89 ee 48 89 [ 605.603111] RSP: 0018:ffff88817b9af348 EFLAGS: 00010213 [ 605.603145] RAX: dffffc0000000000 RBX: ffff88817d28b420 RCX: 0000000000000000 [ 605.603172] RDX: 00e7002460000137 RSI: 0000000000000008 RDI: 07380123000009be [ 605.603199] RBP: ffff88817b541a00 R08: 0000000000000001 R09: fffffbfff3ed8c0c [ 605.603226] R10: ffffffff9f6c6067 R11: 0000000000000001 R12: 0000000000000000 [ 605.603253] R13: 073801230000098e R14: ffff88817d28b448 R15: ffff88817b541a84 [ 605.603286] FS: 00007f6570ef67c0(0000) GS:ffff888221dfa000(0000) knlGS:0000000000000000 [ 605.603319] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 605.603343] CR2: 00007f65712fae40 CR3: 000000011371b000 CR4: 0000000000350ef0 [ 605.603373] Call Trace: [ 605.603392] <TASK> [ 605.603410] __dev_queue_xmit+0x448/0x32a0 [ 605.603434] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603461] ? __pfx_vprintk_emit+0x10/0x10 [ 605.603484] ? __pfx___dev_queue_xmit+0x10/0x10 [ 605.603507] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603546] ? _printk+0xcb/0x100 [ 605.603566] ? __pfx__printk+0x10/0x10 [ 605.603589] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603627] ? add_taint+0x5e/0x70 [ 605.603648] ? add_taint+0x2a/0x70 [ 605.603670] ? end_report.cold+0x51/0x75 [ 605.603693] ? bond_start_xmit+0xbfb/0xc20 [bonding] [ 605.603731] bond_start_xmit+0x623/0xc20 [bonding] Fixes: 9e2ee5c ("net, bonding: Add XDP support to the bonding driver") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reported-by: Chen Zhen <chenzhen126@huawei.com> Closes: https://lore.kernel.org/netdev/fae17c21-4940-5605-85b2-1d5e17342358@huawei.com/ CC: Jussi Maki <joamaki@gmail.com> CC: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://patch.msgid.link/20260123120659.571187-1-razor@blackwall.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
praneethbajjuri
pushed a commit
that referenced
this pull request
Feb 10, 2026
[ Upstream commit 9bb30be ] Add NULL pointer checks in ice_vsi_set_napi_queues() to prevent crashes during resume from suspend when rings[q_idx]->q_vector is NULL. Tested adaptor: 60:00.0 Ethernet controller [0200]: Intel Corporation Ethernet Controller E810-XXV for SFP [8086:159b] (rev 02) Subsystem: Intel Corporation Ethernet Network Adapter E810-XXV-2 [8086:4003] SR-IOV state: both disabled and enabled can reproduce this issue. kernel version: v6.18 Reproduce steps: Boot up and execute suspend like systemctl suspend or rtcwake. Log: <1>[ 231.443607] BUG: kernel NULL pointer dereference, address: 0000000000000040 <1>[ 231.444052] #PF: supervisor read access in kernel mode <1>[ 231.444484] #PF: error_code(0x0000) - not-present page <6>[ 231.444913] PGD 0 P4D 0 <4>[ 231.445342] Oops: Oops: 0000 [#1] SMP NOPTI <4>[ 231.446635] RIP: 0010:netif_queue_set_napi+0xa/0x170 <4>[ 231.447067] Code: 31 f6 31 ff c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 85 c9 74 0b <48> 83 79 30 00 0f 84 39 01 00 00 55 41 89 d1 49 89 f8 89 f2 48 89 <4>[ 231.447513] RSP: 0018:ffffcc780fc078c0 EFLAGS: 00010202 <4>[ 231.447961] RAX: ffff8b848ca30400 RBX: ffff8b848caf2028 RCX: 0000000000000010 <4>[ 231.448443] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8b848dbd4000 <4>[ 231.448896] RBP: ffffcc780fc078e8 R08: 0000000000000000 R09: 0000000000000000 <4>[ 231.449345] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 <4>[ 231.449817] R13: ffff8b848dbd4000 R14: ffff8b84833390c8 R15: 0000000000000000 <4>[ 231.450265] FS: 00007c7b29e9d740(0000) GS:ffff8b8c068e2000(0000) knlGS:0000000000000000 <4>[ 231.450715] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 231.451179] CR2: 0000000000000040 CR3: 000000030626f004 CR4: 0000000000f72ef0 <4>[ 231.451629] PKRU: 55555554 <4>[ 231.452076] Call Trace: <4>[ 231.452549] <TASK> <4>[ 231.452996] ? ice_vsi_set_napi_queues+0x4d/0x110 [ice] <4>[ 231.453482] ice_resume+0xfd/0x220 [ice] <4>[ 231.453977] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.454425] pci_pm_resume+0x8c/0x140 <4>[ 231.454872] ? __pfx_pci_pm_resume+0x10/0x10 <4>[ 231.455347] dpm_run_callback+0x5f/0x160 <4>[ 231.455796] ? dpm_wait_for_superior+0x107/0x170 <4>[ 231.456244] device_resume+0x177/0x270 <4>[ 231.456708] dpm_resume+0x209/0x2f0 <4>[ 231.457151] dpm_resume_end+0x15/0x30 <4>[ 231.457596] suspend_devices_and_enter+0x1da/0x2b0 <4>[ 231.458054] enter_state+0x10e/0x570 Add defensive checks for both the ring pointer and its q_vector before dereferencing, allowing the system to resume successfully even when q_vectors are unmapped. Fixes: 2a5dc09 ("ice: move netif_queue_set_napi to rtnl-protected sections") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
praneethbajjuri
pushed a commit
that referenced
this pull request
Feb 10, 2026
[ Upstream commit f676669 ] When deleting TC steering flows, iterate only over actual devcom peers instead of assuming all possible ports exist. This avoids touching non-existent peers and ensures cleanup is limited to devices the driver is currently connected to. BUG: kernel NULL pointer dereference, address: 0000000000000008 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 133c8a067 P4D 0 Oops: Oops: 0002 [#1] SMP CPU: 19 UID: 0 PID: 2169 Comm: tc Not tainted 6.18.0+ #156 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_tc_del_fdb_peers_flow+0xbe/0x200 [mlx5_core] Code: 00 00 a8 08 74 a8 49 8b 46 18 f6 c4 02 74 9f 4c 8d bf a0 12 00 00 4c 89 ff e8 0e e7 96 e1 49 8b 44 24 08 49 8b 0c 24 4c 89 ff <48> 89 41 08 48 89 08 49 89 2c 24 49 89 5c 24 08 e8 7d ce 96 e1 49 RSP: 0018:ff11000143867528 EFLAGS: 00010246 RAX: 0000000000000000 RBX: dead000000000122 RCX: 0000000000000000 RDX: ff11000143691580 RSI: ff110001026e5000 RDI: ff11000106f3d2a0 RBP: dead000000000100 R08: 00000000000003fd R09: 0000000000000002 R10: ff11000101c75690 R11: ff1100085faea178 R12: ff11000115f0ae78 R13: 0000000000000000 R14: ff11000115f0a800 R15: ff11000106f3d2a0 FS: 00007f35236bf740(0000) GS:ff110008dc809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 0000000157a01001 CR4: 0000000000373eb0 Call Trace: <TASK> mlx5e_tc_del_flow+0x46/0x270 [mlx5_core] mlx5e_flow_put+0x25/0x50 [mlx5_core] mlx5e_delete_flower+0x2a6/0x3e0 [mlx5_core] tc_setup_cb_reoffload+0x20/0x80 fl_reoffload+0x26f/0x2f0 [cls_flower] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] ? mlx5e_tc_reoffload_flows_work+0xc0/0xc0 [mlx5_core] tcf_block_playback_offloads+0x9e/0x1c0 tcf_block_unbind+0x7b/0xd0 tcf_block_setup+0x186/0x1d0 tcf_block_offload_cmd.isra.0+0xef/0x130 tcf_block_offload_unbind+0x43/0x70 __tcf_block_put+0x85/0x160 ingress_destroy+0x32/0x110 [sch_ingress] __qdisc_destroy+0x44/0x100 qdisc_graft+0x22b/0x610 tc_get_qdisc+0x183/0x4d0 rtnetlink_rcv_msg+0x2d7/0x3d0 ? rtnl_calcit.isra.0+0x100/0x100 netlink_rcv_skb+0x53/0x100 netlink_unicast+0x249/0x320 ? __alloc_skb+0x102/0x1f0 netlink_sendmsg+0x1e3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1ef/0x230 ? copy_msghdr_from_user+0x6c/0xa0 ___sys_sendmsg+0x7f/0xc0 ? ___sys_recvmsg+0x8a/0xc0 ? __sys_sendto+0x119/0x180 __sys_sendmsg+0x61/0xb0 do_syscall_64+0x55/0x640 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f35238bb764 Code: 15 b9 86 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bf 0f 1f 44 00 00 f3 0f 1e fa 80 3d e5 08 0d 00 00 74 13 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 4c c3 0f 1f 00 55 48 89 e5 48 83 ec 20 89 55 RSP: 002b:00007ffed4c35638 EFLAGS: 00000202 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000055a2efcc75e0 RCX: 00007f35238bb764 RDX: 0000000000000000 RSI: 00007ffed4c356a0 RDI: 0000000000000003 RBP: 00007ffed4c35710 R08: 0000000000000010 R09: 00007f3523984b20 R10: 0000000000000004 R11: 0000000000000202 R12: 00007ffed4c35790 R13: 000000006947df8f R14: 000055a2efcc75e0 R15: 00007ffed4c35780 Fixes: 9be6c21 ("net/mlx5e: Handle offloads flows per peer") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/1769411695-18820-3-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
praneethbajjuri
pushed a commit
that referenced
this pull request
Feb 10, 2026
[ Upstream commit 2aa1545 ] Since the commit 25c6a5a ("net: phy: micrel: Dynamically control external clock of KSZ PHY"), the clock of Micrel PHY has been enabled by phy_driver::resume() and disabled by phy_driver::suspend(). However, devm_clk_get_optional_enabled() is used in kszphy_probe(), so the clock will automatically be disabled when the device is unbound from the bus. Therefore, this could cause the clock to be disabled twice, resulting in clk driver warnings. For example, this issue can be reproduced on i.MX6ULL platform, and we can see the following logs when removing the FEC MAC drivers. $ echo 2188000.ethernet > /sys/bus/platform/drivers/fec/unbind $ echo 20b4000.ethernet > /sys/bus/platform/drivers/fec/unbind [ 109.758207] ------------[ cut here ]------------ [ 109.758240] WARNING: drivers/clk/clk.c:1188 at clk_core_disable+0xb4/0xd0, CPU#0: sh/639 [ 109.771011] enet2_ref already disabled [ 109.793359] Call trace: [ 109.822006] clk_core_disable from clk_disable+0x28/0x34 [ 109.827340] clk_disable from clk_disable_unprepare+0xc/0x18 [ 109.833029] clk_disable_unprepare from devm_clk_release+0x1c/0x28 [ 109.839241] devm_clk_release from devres_release_all+0x98/0x100 [ 109.845278] devres_release_all from device_unbind_cleanup+0xc/0x70 [ 109.851571] device_unbind_cleanup from device_release_driver_internal+0x1a4/0x1f4 [ 109.859170] device_release_driver_internal from bus_remove_device+0xbc/0xe4 [ 109.866243] bus_remove_device from device_del+0x140/0x458 [ 109.871757] device_del from phy_mdio_device_remove+0xc/0x24 [ 109.877452] phy_mdio_device_remove from mdiobus_unregister+0x40/0xac [ 109.883918] mdiobus_unregister from fec_enet_mii_remove+0x40/0x78 [ 109.890125] fec_enet_mii_remove from fec_drv_remove+0x4c/0x158 [ 109.896076] fec_drv_remove from device_release_driver_internal+0x17c/0x1f4 [ 109.962748] WARNING: drivers/clk/clk.c:1047 at clk_core_unprepare+0xfc/0x13c, CPU#0: sh/639 [ 109.975805] enet2_ref already unprepared [ 110.002866] Call trace: [ 110.031758] clk_core_unprepare from clk_unprepare+0x24/0x2c [ 110.037440] clk_unprepare from devm_clk_release+0x1c/0x28 [ 110.042957] devm_clk_release from devres_release_all+0x98/0x100 [ 110.048989] devres_release_all from device_unbind_cleanup+0xc/0x70 [ 110.055280] device_unbind_cleanup from device_release_driver_internal+0x1a4/0x1f4 [ 110.062877] device_release_driver_internal from bus_remove_device+0xbc/0xe4 [ 110.069950] bus_remove_device from device_del+0x140/0x458 [ 110.075469] device_del from phy_mdio_device_remove+0xc/0x24 [ 110.081165] phy_mdio_device_remove from mdiobus_unregister+0x40/0xac [ 110.087632] mdiobus_unregister from fec_enet_mii_remove+0x40/0x78 [ 110.093836] fec_enet_mii_remove from fec_drv_remove+0x4c/0x158 [ 110.099782] fec_drv_remove from device_release_driver_internal+0x17c/0x1f4 After analyzing the process of removing the FEC driver, as shown below, it can be seen that the clock was disabled twice by the PHY driver. fec_drv_remove() --> fec_enet_close() --> phy_stop() --> phy_suspend() --> kszphy_suspend() #1 The clock is disabled --> fec_enet_mii_remove() --> mdiobus_unregister() --> phy_mdio_device_remove() --> device_del() --> devm_clk_release() #2 The clock is disabled again Therefore, devm_clk_get_optional() is used to fix the above issue. And to avoid the issue mentioned by the commit 9853294 ("net: phy: micrel: use devm_clk_get_optional_enabled for the rmii-ref clock"), the clock is enabled by clk_prepare_enable() to get the correct clock rate. Fixes: 25c6a5a ("net: phy: micrel: Dynamically control external clock of KSZ PHY") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/20260126081544.983517-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
praneethbajjuri
pushed a commit
that referenced
this pull request
Feb 10, 2026
[ Upstream commit a8f930b ] HCA CAP structure is allocated in mlx5_hca_caps_alloc(). mlx5_mdev_init() mlx5_hca_caps_alloc() And HCA CAP is read from the device in mlx5_init_one(). The vhca_id's debugfs file is published even before above two operations are done. Due to this when user reads the vhca id before the initialization, following call trace is observed. Fix this by deferring debugfs publication until the HCA CAP is allocated and read from the device. BUG: kernel NULL pointer dereference, address: 0000000000000004 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 23 UID: 0 PID: 6605 Comm: cat Kdump: loaded Not tainted 6.18.0-rc7-sf+ #110 PREEMPT(full) Hardware name: Supermicro SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b 08/09/2016 RIP: 0010:vhca_id_show+0x17/0x30 [mlx5_core] Code: cb 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 8b 47 70 48 c7 c6 45 f0 12 c1 48 8b 80 70 03 00 00 <8b> 50 04 0f ca 0f b7 d2 e8 8c 82 47 cb 31 c0 c3 cc cc cc cc 0f 1f RSP: 0018:ffffd37f4f337d40 EFLAGS: 00010203 RAX: 0000000000000000 RBX: ffff8f18445c9b40 RCX: 0000000000000001 RDX: ffff8f1109825180 RSI: ffffffffc112f045 RDI: ffff8f18445c9b40 RBP: 0000000000000000 R08: 0000645eac0d2928 R09: 0000000000000006 R10: ffffd37f4f337d48 R11: 0000000000000000 R12: ffffd37f4f337dd8 R13: ffffd37f4f337db0 R14: ffff8f18445c9b68 R15: 0000000000000001 FS: 00007f3eea099580(0000) GS:ffff8f2090f1f000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000004 CR3: 00000008b64e4006 CR4: 00000000003726f0 Call Trace: <TASK> seq_read_iter+0x11f/0x4f0 ? _raw_spin_unlock+0x15/0x30 ? do_anonymous_page+0x104/0x810 seq_read+0xf6/0x120 ? srso_alias_untrain_ret+0x1/0x10 full_proxy_read+0x5c/0x90 vfs_read+0xad/0x320 ? handle_mm_fault+0x1ab/0x290 ksys_read+0x52/0xd0 do_syscall_64+0x61/0x11e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: dd3dd72 ("net/mlx5: Expose vhca_id to debugfs") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Shay Drori <shayd@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Link: https://patch.msgid.link/1769503961-124173-4-git-send-email-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1 participant
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This patch fixes a kernel oops in the SA2UL crypto driver caused by calling
dma_unmap_single() on an uninitialized DMA address during context cleanup.
The issue can be triggered when a crypto context is destroyed without
ctx->sc_phys ever being mapped, leading to a data abort in dcache_inval.
The fix validates ctx->sc_phys before calling dma_unmap_single(), ensuring
only allocated DMA memory is unmapped.
This issue is present in upstream Linux 6.12 and the patch is intended
to be upstream-ready. Requesting inclusion in ti-linux-6.12.y.