Skip to content

History / FAQ

Revisions

  • Split tubing into its own assembly stage and hide visual-production notes from the rendered page. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 12, 2026
    fa9806e

  • Keep Assembly to the DIY build steps and put printing, install, and RheoData on the pages that own them. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 12, 2026
    e120797

  • Lead the DIY assembly guide to a first Serial Monitor pressure reading, and keep the direct 12 V ratings question visible. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 12, 2026
    594f72f

  • Make the DIY assembly steps say what to connect, where it goes, and how to tell it worked. Point the FAQ and calibration pages at the renamed first-measurement step. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 12, 2026
    7b040cf

  • Use the file or folder name as the link text instead of the full path.

    @vuong056 vuong056 committed Oct 11, 2026
    c3f434c

  • Drop the repeated CC BY-SA footer so the short license line stays on Certification. Home keeps the three licenses and the OSHWA mark, and it names Certification once. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 10, 2026
    c2238b3

  • Move wiki license lines to the bottom and point them at Certification. The repository LICENSE file stays linked only from the Certification page. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 10, 2026
    84674e7

  • Rename the DIY, PCB, and Portable paths to RheoBoardOTS - DIY, RheoBoard_v1 - PCB, and RheoBoardPipette - Portable. Page filenames use a Unicode hyphen so GitHub shows that hyphen. An ASCII hyphen in a wiki filename is displayed as a space. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 10, 2026
    9e4895c

  • Remove maintainer TODO callouts from the public builder guide. Builders keep the steps that are already known. Gap notes stay in the repository, not on the wiki. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 10, 2026
    b33fec6

  • Remove duplicate Connecting, Firmware, and Power-on checks pages so Code and assembly Step 04 are the copies builders use, and split Care and About in the sidebar. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 10, 2026
    c4365ff

  • Remove leading H1s that repeat the page name GitHub already shows. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 10, 2026
    412c39d

  • Give each build choice its own written path. A builder starts at Build options and follows DIY, PCB, or portable. Panel layout is removed after its extra placement facts were folded into assembly Step 01.

    @vuong056 vuong056 committed Oct 10, 2026
    93f1998

  • Rename the tools list to Tools you may need. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 9, 2026
    a81efa6

  • builder navigation and step clarity Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 9, 2026
    e7cb7bb

  • Version 2: 3D-printed panel and enclosure; laser-cut panel archived. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 8, 2026
    4500819

  • Rename Rev C to version 1 to match the OSHWA listing (US002865). Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 8, 2026
    ef2b4f1

  • the wiki mirrors the in-repo docs. Co-authored-by: Cursor <cursoragent@cursor.com>

    @vuong056 vuong056 committed Oct 4, 2026
    b0a6726