Add example_control_loop.py

examples/example_control_loop.py

@@ -0,0 +1,108 @@
+#!/usr/bin/env python
+# Copyright (c) 2016, Universal Robots A/S,
+# All rights reserved.
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are met:
+#    * Redistributions of source code must retain the above copyright
+#      notice, this list of conditions and the following disclaimer.
+#    * Redistributions in binary form must reproduce the above copyright
+#      notice, this list of conditions and the following disclaimer in the
+#      documentation and/or other materials provided with the distribution.
+#    * Neither the name of the Universal Robots A/S nor the names of its
+#      contributors may be used to endorse or promote products derived
+#      from this software without specific prior written permission.
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+# DISCLAIMED. IN NO EVENT SHALL UNIVERSAL ROBOTS A/S BE LIABLE FOR ANY
+# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+import sys
+sys.path.append('..')
+import logging
+
+import rtde.rtde as rtde
+import rtde.rtde_config as rtde_config
+
+
+#logging.basicConfig(level=logging.INFO)
+
+ROBOT_HOST = 'localhost'
+ROBOT_PORT = 30004
+config_filename = 'control_loop_configuration.xml'
+
+keep_running = True
+
+logging.getLogger().setLevel(logging.INFO)
+
+conf = rtde_config.ConfigFile(config_filename)
+state_names, state_types = conf.get_recipe('state')
+setp_names, setp_types = conf.get_recipe('setp')
+watchdog_names, watchdog_types = conf.get_recipe('watchdog')
+
+con = rtde.RTDE(ROBOT_HOST, ROBOT_PORT)
+con.connect()
+
+# get controller version
+con.get_controller_version()
+
+# setup recipes
+con.send_output_setup(state_names, state_types)
+setp = con.send_input_setup(setp_names, setp_types)
+watchdog = con.send_input_setup(watchdog_names, watchdog_types)
+
+# Setpoints to move the robot to
+setp1 = [-0.12, -0.43, 0.14, 0, 3.11, 0.04]
+setp2 = [-0.12, -0.51, 0.21, 0, 3.11, 0.04]
+
+setp.input_double_register_0 = 0
+setp.input_double_register_1 = 0
+setp.input_double_register_2 = 0
+setp.input_double_register_3 = 0
+setp.input_double_register_4 = 0
+setp.input_double_register_5 = 0
+
+# The function "rtde_set_watchdog" in the "rtde_control_loop.urp" creates a 1 Hz watchdog
+watchdog.input_int_register_0 = 0
+
+def setp_to_list(setp):
+    list = []
+    for i in range(0,6):
+        list.append(setp.__dict__["input_double_register_%i" % i])
+    return list
+
+def list_to_setp(setp, list):
+    for i in range (0,6):
+        setp.__dict__["input_double_register_%i" % i] = list[i]
+    return setp
+
+#start data synchronization
+if not con.send_start():
+    sys.exit()
+
+# control loop
+while keep_running:
+    # receive the current state
+    state = con.receive()
+
+    if state is None:
+        break;
+
+    # do something...
+    if state.output_int_register_0 != 0:
+        new_setp = setp1 if setp_to_list(setp) == setp2 else setp2
+        list_to_setp(setp, new_setp)
+        # send new setpoint        
+        con.send(setp)
+
+    # kick watchdog
+    con.send(watchdog)
+
+con.send_pause()
+
+con.disconnect()