WebODM 3.2.1 - "Cannot process dataset"

[AndreaCan]

I recently downloaded and installed WebODM 3.2.1 Windows version with a direct installer (no Docker).
I ran some tests with different photo sets, but in all cases I didn't achieve the final result because the processing terminated with the error "Cannot process dataset".
The tests were performed with:

1. A set of 70 RGB images taken with the Matrice 4T with RTK. To obtain a 3D model, I used the "3D Model" preset.
2. A set of 70 RJPG thermal images (converted to TIFF with your converter) taken with the Matrice 4T with RTK. To obtain a thermal model, I initially used the "Multispectral" preset and then the "3D Model" preset.
3. A set of 360 RGB photos, with the same conditions as above.
4. A set of 360 RJPG thermal photos, same test conditions as above.

I would like to point out that the RGB and thermal image set of 70 images was also sent, analyzed, and I obtained error-free results with WebODM Lighting. I then downloaded the backup file to my computer and was able to view the processed Lighting results directly from my PC with WebODM 3.2.1.

I also installed your software on another computer with a different processor and a different version of Nvidia graphics card. I ran the same tests on it, but I always got the same error. The only thing the two computers have in common is that they both have 16 GB of RAM.

All the image sets I used in the tests were also used without problems on Reality Scan, Metashape, DJI Terra, and MipMap. From these I obtained 3D models, orthophotos, etc.

I attach the file with the LOGs obtained during the execution of the work with the RGB image set.

This is the link to the dataset: https://drive.google.com/file/d/1Q3u2CZfhRSlMl5vcs7BpwXVKA-TtkVw-/view?usp=sharing

Best regards
Andrea

console.txt

[AndreaCan]

I added the dataset, can someone reopen the report?

[pierotofy]

Mm, try with the latest version (at least WebODM build 139)?

It might have been a problem with the EXIF data which I've fixed just today.

[AndreaCan]

Mm, try with the latest version (at least WebODM build 139)?

Yes, I can confirm that with build version 139 (the latest available to date), I was able to complete the processing without errors.

But I have a question: does webODM use my precise RTK positions or does it use GPS ones, which could potentially cause position errors?

I read that the Matrice 4T thermal camera isn't among those available for radiometric processing, and that you're requesting datasets to include it. Do you want some thermal photos to include the Matrice 4T thermal camera as well?