-
Notifications
You must be signed in to change notification settings - Fork 0
Flight Page
ZotacAviation edited this page May 26, 2020
·
20 revisions
XP11.FSToolsConnector.lua: Place it in your FlyWithLua scripts folder. FlyWithLua is required.
Once these are installed, just run your simulator and the main program and you're ready to roll.
Discord Presence will not display flight information without your simulator and a loaded flight plan.
To connect a flight plan manually:
- Make sure any active flight plans are unloaded (indicated by red text next to the callsign input box).
- Empty all callsign input boxes.
- Fill in all input boxes in the rows above the Load, Unload, and Reset Flight buttons.
- Click Load.
To connect a flight plan via VATSIM:
- File (or pre-file) a flight plan on the VATSIM network.
- Enter your callsign into the callsign input box.
- Press enter (or click Load).
When one clicks the Reset Flight button, the flight stage and statuses will reset. Active flight plans will remain active.
This is a list of flight stages that may appear on your Discord Presence (Skip from = stage can be accessed without passing through in-between stages):
Climb - Altitude greater than 750ft AGL or indicated altitude greater than 250ft below cruise altitude
Cruise - Indicated altitude greater than 1000ft below cruise altitude or altitude less than or equal to 500ft AGL and indicated altitude greater than 250ft below cruise altitude or distance left to destination less than 5nmi
Descent - Indicated altitude less than 1000ft below cruise altitude or altitude less than or equal to 500ft AGL and indicated altitude less than 250ft below cruise altitude or distance left to destination less than 5nmi
Expanding simulation.