Add missing boards for CP 8.0.0-beta.2

_board/espressif_esp32s2_devkitc_1_n8r2.md

@@ -0,0 +1,23 @@
+---
+layout: download
+board_id: "espressif_esp32s2_devkitc_1_n8r2"
+title: "ESP32-S2-DevKitC-1-N8R2 Download"
+name: "ESP32-S2-DevKitC-1-N8R2"
+manufacturer: "Espressif"
+board_url: ""
+board_image: "espressif_esp32s2_devkitc_1_n8r2.jpg"
+date_added: 2022-10-14
+family: esp32s2
+features:
+  - Wi-Fi
+  - Breadboard-Friendly
+---
+
+ESP32-S2-DevKitC-1 is an entry-level development board based on ESP32-S2-SOLO (on-board PCB antenna) or ESP32-S2-SOLO-U (external antenna connector), which are two general-purpose modules with a 4 MB SPI flash. This board integrates complete Wi-Fi functions.
+
+Most of the I/O pins are broken out to the pin headers on both sides for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S2-DevKitC-1 on a breadboard.
+
+## Purchase
+
+* [Digi-Key](https://www.digikey.com/en/products/detail/espressif-systems/ESP32-S2-DEVKITC-1-N8R2/16688755)
+* [Amazon](https://amzn.to/3rXL5d8)

_board/vcc_gnd_yd_rp2040.md

@@ -0,0 +1,29 @@
+---
+layout: download
+board_id: "vcc_gnd_yd_rp2040"
+title: "YD-RP2040 Download"
+name: "YD-RP2040"
+manufacturer: "VCC-GND Studio"
+board_url: ""
+board_image: "vcc_gnd_yd_rp2040.jpg"
+date_added: 2022-10-14
+family: raspberrypi
+features:
+  - Breadboard-Friendly
+  - USB-C
+---
+
+Flexible I/O connects RP2040 to the physical world by allowing it to speak to almost anyexternal device. High performance breezes through integer workloads. Low cost helps ease the barrier to entry.
+
+This isn’t just apowerful chip: it’s designed to help you bring every last drop of that power to bear. With six independent banks of RAM, and a fully connected switch at the heart of its bus fabric, you can easily arrange for the cores and DMA engines to run in parallel without contention.
+
+VCC-GND Studios' YD-RP2040 has the following improvements over the Raspberry Pi Pico:
+- Added PWR power LED
+- The USB interface was changed to type-C USB
+- Added reset button to facilitate reset operation and firmware update operation.
+- Added the USRkey user button（GPIO24).
+- Added RGB lights（GPIO23）
+- Change PICO's W25Q16 to W25Q32（4M）/W25Q64（8M）/W25Q128（16M）
+
+## Purchase
+* [Aliexpress](https://www.aliexpress.us/item/3256803817805852.html)