Home

Welcome to the SmartPlant wiki!

---

Here is the complete instruction of what you will need to build the same project:

1. First you will need PCB. You can order one on PCBWay, 4PCB, JLCPCB or any other manufacture.

To order the PCB you will be asked for Gerber files. Each manufacture has different export configurations, so in most cases you will need to do it manually throw KiCad. As I personally use JLCPCB, here is Gerber that I generated.

2. You need to get yourself all electronics. Here is the [bill of materials](Bill of materials). You can order an assembly or assemble by yourself.
3. You will need a PC with Arduino IDE installed. Connect your PC to Arduino Nano, select proper bootloader and install the firmware.
4. Grab yourself a case. You may 3d print the case from the render.
5. Plant a herb!