Use Auto Context In Harness Phases

How to use auto-context in harness phases

Note

Goal: Tune the harness's phase-boundary MemoryVault auto-context behavior (recall budgets, save mode, confidence threshold) for your project, and troubleshoot when it doesn't fire as expected. Prereqs: crickets sibling-cloned next to agentm; MEMORY_VAULT_PATH env set; harness ≥ v2.5.0 (when ADR 0007 shipped). See Project config for the .harness/project.json field references this page assumes.

Once crickets is sibling-cloned next to agentm and MEMORY_VAULT_PATH is set, every harness phase auto-loads relevant MemoryVault context at its natural start, and offers to save durable items at its natural end — without you having to invoke /memory search or /memory save manually.

This page covers: what loads/saves at each phase boundary, the env vars that tune the behavior, and how to troubleshoot when something feels off.

Prerequisites

1. MemoryVault installed (v4.0.0+: shipped with agentm at harness/skills/memory/; in v3.x and earlier it lived at crickets/skills/memory/ and the harness loaded it via sibling-clone resolution). For v3.x compatibility, the harness's 3-tier resolver checks agentm/harness/skills/memory/scripts/save.py first, then falls back to the legacy crickets/skills/memory/scripts/save.py sibling path, then to HARNESS_MEMORY_TOOLKIT_PATH env override.
2. MEMORY_VAULT_PATH env set to your vault root (e.g. ~/Library/CloudStorage/GoogleDrive-…/Obsidian/AgentMemory).
3. .harness/project.json has a vault_project field OR your repo has a github.repo field OR a git origin — auto-detect uses the 3-tier fallback (see ADR 0007 §Q2).

If any prerequisite is absent, every phase still works — the dispatcher graceful-skips silently (see Troubleshooting below).

Per-phase boundaries

Phase	Recall (start)	Save (end)
/setup (§1b + §8b)	_always-load/ conventions	Offer projects/<slug>/_index.md stub (legacy personal-projects/ accepted pre-rename)
/plan (§1b + §4c)	_always-load/ + _index.md + decisions + open-questions	Offer per-entry save for plan's ## Risks / open questions
/work (§1b + §7b + §7c)	_always-load/ + decisions + known-issues	Offer "remember-this" candidates + plan-done-promotion when final task flips PLAN.md to done
/review (§2b)	_always-load/ only (read-only — no save)	—
/release (§1c + §5b + §5c)	_always-load/ + decisions	Offer per-decision save + plan-done-promotion (shared cursor with /work)
/bugfix (§2b + §4b)	_always-load/ + known-issues	Offer save when bug had non-obvious root cause

The "Pattern A" boundary is recall-then-work-then-offer-save. /review skips save by design — a reviewer that writes biases toward confirming its own findings.

The dispatcher

All phase specs invoke python3 scripts/harness_memory.py with one of four sub-commands:

# Check vault availability — exit 0 if accessible, 1 otherwise:
python3 scripts/harness_memory.py available

# Phase-specific recall (graceful-skip on absent vault):
python3 scripts/harness_memory.py recall --phase <name> --project <slug>
                                          [--budget <tokens>] [--permanent-only]

# Self-modulating offer-save (graceful-skip on absent vault):
python3 scripts/harness_memory.py offer-save \
    --phase <name> --project <slug> \
    --kind <decision|gotcha|workflow|...> --slug <entry-slug> \
    --content-file <path> \
    [--confidence <0-1>] [--confidence-reason <text>]

# Cursor-tracked progress.md tail-scan (idempotent re-invocation):
python3 scripts/harness_memory.py plan-done-promotion --project-root . [--dry-run]

You don't normally invoke these directly — phase specs invoke them at the right moments. Manual invocation is for debugging.

Env-var matrix

Variable	Default	Effect
MEMORY_VAULT_PATH	(unset)	Vault root path. Unset → all auto-context features graceful-skip silently.
HARNESS_AUTO_SAVE_MODE	ask	ask (confidence-modulated), silent (always save, no prompt), off (never save).
HARNESS_AUTO_SAVE_CONFIDENCE_THRESHOLD	0.8	Float 0–1. Agent-supplied --confidence ≥ threshold → silent save with stderr notice; below → prompt.
HARNESS_RECALL_BUDGET_<PHASE>	4000 (review/setup) or 6000 (others)	Token cap for recall, per phase. Use uppercase phase name: SETUP / PLAN / WORK / REVIEW / RELEASE / BUGFIX.
HARNESS_MEMORY_TOOLKIT_PATH	(auto-detect)	Override the toolkit memory-scripts dir. Used by tests + by operators with non-standard toolkit install locations.

Worked scenario: tuning offer-save fatigue

Symptom: every /work task ends with 3+ "save this entry? [y/N]" prompts. You're reflex-skipping all of them.

Diagnosis: the agent's confidence calibration is below your threshold for everything, so every candidate fires the prompt. Either the agent is being conservative (good signal, bad UX), or the threshold is too high for early dogfood.

Three fixes, increasing aggressiveness:

1. Lower the threshold: export HARNESS_AUTO_SAVE_CONFIDENCE_THRESHOLD=0.7. High-confidence candidates now silent-save; only genuinely-ambiguous ones prompt.
2. Cap candidates in /work §7b: the spec already caps at ~3 candidates per session. If the agent is firing more, that's a signal to widen scope at /plan rather than dump to the vault.
3. Switch to silent globally: export HARNESS_AUTO_SAVE_MODE=silent. Auto-save runs; you scan stderr [auto-saved high-confidence] lines periodically and /memory evolve any that turned out wrong.

Reverse direction: if you're getting false-positive silent saves (vault filling with noise), raise the threshold: export HARNESS_AUTO_SAVE_CONFIDENCE_THRESHOLD=0.9.

Worked scenario: recall budget feels too tight

Symptom: /plan recall returns 2 entries when you know there are 8 relevant decisions in the vault for this project.

Diagnosis: budget cap is dropping trailing entries. Confirm with the recall header line: (budget: ~6000 tokens, entries: 2) — if entries < what you expect, budget is constraining.

Fix: export HARNESS_RECALL_BUDGET_PLAN=12000 (double the default). Re-run /plan. The header will reflect the new budget.

Entry cap is a separate constraint (default 5 per phase) — if you need more entries, that's a phase-spec config in harness_memory.py rather than env.

Worked scenario: confirming the plan-done-promotion cursor

Symptom: you ran /release and the tail-scan returned empty even though progress.md has 20 entries since the last release.

Diagnosis: likely the cursor was already advanced by /work's plan-done-promotion when you marked the final task [x]. Per Q5 design call, the cursor is shared between /work §7c + /release §5c — single fire per plan-window.

Confirm: cat .harness/.promoted-progress-cursor should show a byte offset at or near wc -c .harness/progress.md output. If yes, the cursor is at EOF — promotion already happened.

Reset (if you want to re-promote): rm .harness/.promoted-progress-cursor. Next plan-done-promotion invocation will re-emit the full tail. The toolkit's save.py deduplicates so the worst case is a few re-prompts for already-saved candidates.

Troubleshooting

Symptom	Likely cause	Fix
No recall output at all	MEMORY_VAULT_PATH env unset OR directory missing	echo $MEMORY_VAULT_PATH + verify dir exists
Recall output but missing per-project entries	vault_project slug not resolving to a real projects/<slug>/ dir (or legacy personal-projects/<slug>/ pre-rename)	python3 scripts/vault_project.py read . — check the returned slug matches a vault entry
[harness_memory] toolkit not installed stderr notice	Memory scripts not found via 3-tier resolution	Verify agentm/harness/skills/memory/scripts/save.py (v4.0.0+) OR legacy crickets/skills/memory/scripts/save.py (v3.x) exists; OR set HARNESS_MEMORY_TOOLKIT_PATH
Save prompt fires even at high confidence	Threshold set above 0.8 OR HARNESS_AUTO_SAVE_MODE=ask with no --confidence passed	Check threshold env; if confidence is omitted by the agent, prompt is correct behavior (fallback to ask)
Save proceeds silently when you wanted to review	HARNESS_AUTO_SAVE_MODE=silent OR confidence ≥ threshold	Switch mode back to ask (default); raise threshold if confidence is being over-estimated
Cursor advances but no candidates surface	progress.md since last cursor was empty OR LLM summarizer found nothing durable	Expected when last plan was small/routine; re-check with --dry-run flag
Windows UnicodeEncodeError on recall output	cp1252 stdout default; recall output contains non-ASCII	Add sys.stdout.reconfigure(encoding="utf-8") defensively in any wrapper script invoking the dispatcher
available exits 1 even with vault set	Vault directory deleted/moved OR permissions issue	ls -la "$MEMORY_VAULT_PATH" — confirm it's readable + a directory (not a symlink to nowhere)

See also

• Repo-Layout — where scripts/harness_memory.py + scripts/vault_project.py live in the harness tree.
• CI-Gates — the unit tests that exercise the dispatcher cross-platform on Linux/Mac/Windows.
• ADR 0007 — Auto-context into harness phases — 5 locked design calls + load-bearing assumptions.
• crickets Cross-Repo Memory Protocol — toolkit-side contract documentation.
• crickets /memory skill — the underlying save/recall surface that harness_memory.py shells out to.
• Phase specs: the phase loop (/setup /plan /work /review /release /bugfix) ships in the crickets developer-workflows plugin since the V5 unbundling (ADR 0011).