(PC_2 and PC_3) ArduinoCore-mbed\cores\arduino\mbed\targets\target_stm\target_stm32h7\TARGET_STM32H747xI\target_portenta_h7\PinNames.h

[jwestmoreland]

Hello All,

In PinNames.h - are the PC_2 and PC_3 assignments correct?

I checked the schematic - doesn't match. My search/check of this list is not exhaustive.

/**** USB pins ****/
USB_OTG_FS_DM = PA_11,
USB_OTG_FS_DP = PA_12,
USB_OTG_FS_ID = PA_10,
USB_OTG_FS_SOF = PA_8,
USB_OTG_FS_VBUS = PA_9,
USB_OTG_HS_DM = PB_14,
USB_OTG_HS_DP = PB_15,
USB_OTG_HS_ID = PB_12,
USB_OTG_HS_SOF = PA_4,
USB_OTG_HS_ULPI_CK = PA_5,
USB_OTG_HS_ULPI_D0 = PA_3,
USB_OTG_HS_ULPI_D1 = PB_0,
USB_OTG_HS_ULPI_D2 = PB_1,
USB_OTG_HS_ULPI_D3 = PB_10,
USB_OTG_HS_ULPI_D4 = PB_11,
USB_OTG_HS_ULPI_D5 = PB_12,
USB_OTG_HS_ULPI_D6 = PB_13,
USB_OTG_HS_ULPI_D7 = PB_5,
USB_OTG_HS_ULPI_DIR = PC_2,
USB_OTG_HS_ULPI_NXT = PC_3,
USB_OTG_HS_ULPI_STP = PC_0,
USB_OTG_HS_VBUS = PB_13,

Thanks,
John W.