Raspberry Pi Manual Setup Instructions

Raspberry Pi Installation ------------------------- - Install _2015-02-16-raspbian-wheezy.img_ onto an SD card. (I use Win32DiskImager) **Do NOT use an older version!** - Start your Raspberry Pi and type the following at the command line: ``` sudo raspi-config ``` - Choose and enable the following options from the Raspberry Pi Software Configuration Tool: * Expand Filesystem * Enable Camera - Choose to reboot the Raspberry Pi when you are prompted by the configuration tool. - After the Raspberry Pi has completed rebooting, execute the following commands at the command line: ``` sudo wget https://github.com/area515/Creation-Workshop-Host/raw/master/host/bin/start.sh sudo chmod 777 start.sh sudo ./start.sh ``` - Automatically find your printer with the browseprinter client if you don't know the ip address and port of your Raspberry Pi. Or use your favorite browser and try: ``` http://[RaspberryPiIp]:9091 ```