-
Notifications
You must be signed in to change notification settings - Fork 107
Raspberry Pi Manual Setup Instructions
Install 2015-02-16-raspbian-wheezy.img onto an SD card. (I use Win32DiskImager) Do NOT use an older version! Start your Raspberry Pi and type the following at the command line: sudo raspi-config Choose and enable the following options from the Raspberry Pi Software Configuration Tool: Expand Filesystem Enable Camera Choose to reboot the Raspberry Pi when you are prompted by the configuration tool. After the Raspberry Pi has completed rebooting, execute the following commands at the command line: sudo wget https://github.com/area515/Creation-Workshop-Host/raw/master/host/bin/start.sh sudo chmod 777 start.sh sudo ./start.sh Automatically find your printer with the browseprinter client if you don't know the ip address and port of your Raspberry Pi. Or use your favorite browser and try: http://[RaspberryPiIp]:9091 Do you want to install the latest stable build?
sudo wget https://github.com/area515/Creation-Workshop-Host/raw/master/host/bin/start.sh sudo chmod 777 start.sh sudo ./start.sh Do you want to install the latest unstable daily development build?
sudo wget https://github.com/WesGilster/Creation-Workshop-Host/raw/master/host/bin/start.sh sudo chmod 777 start.sh sudo ./start.sh WesGilster Do you want to install under Windows?
Download the latest version from: https://github.com/area515/Creation-Workshop-Host/blob/master/host/cwh-X.XX.zip or https://github.com/WesGilster/Creation-Workshop-Host/blob/master/host/cwh-X.XX.zip Unzip the zip file into the directory of your choice. Double click on start.bat. Do you want to use your web browser to automatically navigate to the running printer host without knowing anything about how your network is setup?
Download the latest version from: https://github.com/area515/Creation-Workshop-Host/blob/master/host/cwhClient-X.XX.zip or https://github.com/WesGilster/Creation-Workshop-Host/blob/master/host/cwhClient-X.XX.zip Unzip the zip file into the directory of your choice. If you are in Linux run this: sudo browseprinter.sh If you are in windows double click this:
browseprinter.bat