Raspberry Pi Manual Setup Instructions

Creation-Workshop-Host

Raspberry Pi Installation

• Install 2015-02-16-raspbian-wheezy.img onto an SD card. (I use Win32DiskImager) Do NOT use an older version!

• Start your Raspberry Pi and type the following at the command line:

    sudo raspi-config
  

• Choose and enable the following options from the Raspberry Pi Software Configuration Tool:

  • Expand Filesystem
  • Enable Camera

• Choose to reboot the Raspberry Pi when you are prompted by the configuration tool.

• After the Raspberry Pi has completed rebooting, execute the following commands at the command line:

    sudo wget https://github.com/area515/Creation-Workshop-Host/raw/master/host/bin/start.sh
    sudo chmod 777 start.sh
    sudo ./start.sh
  

• Automatically find your printer with the browseprinter client if you don't know the ip address and port of your Raspberry Pi. Or use your favorite browser and try:

    http://[RaspberryPiIp]:9091
  

Do you want to install the latest stable build?

    sudo wget https://github.com/area515/Creation-Workshop-Host/raw/master/host/bin/start.sh
    sudo chmod 777 start.sh
    sudo ./start.sh

Do you want to install the latest unstable daily development build?

    sudo wget https://github.com/WesGilster/Creation-Workshop-Host/raw/master/host/bin/start.sh
    sudo chmod 777 start.sh
    sudo ./start.sh WesGilster

Do you want to install under Windows?

• Download the latest version from:
• https://github.com/area515/Creation-Workshop-Host/blob/master/host/cwh-X.XX.zip or
• https://github.com/WesGilster/Creation-Workshop-Host/blob/master/host/cwh-X.XX.zip
• Unzip the zip file into the directory of your choice.
• Double click on start.bat.

Do you want to use your web browser to automatically navigate to the running printer host without knowing anything about how your network is setup?

• Download the latest version from: https://github.com/area515/Creation-Workshop-Host/blob/master/host/cwhClient-X.XX.zip or https://github.com/WesGilster/Creation-Workshop-Host/blob/master/host/cwhClient-X.XX.zip

• Unzip the zip file into the directory of your choice.

• If you are in Linux run this:

    sudo browseprinter.sh
  

If you are in windows double click this:

    browseprinter.bat