Introduction

The purpose of this program is to monitor the devices, collect information, analyze them and notify if any problem. Program contains various modules, that can be used individually. E.g. you can download and use only host resource monitor. After that you can downlad and use device visualizer module on Arduino as well. For instructions how to do that, see below

Downloads

There are downloads available for Linux and Windows machines. Here are fast references to them

Instructions

To use this software, you have to download the product from links above. Here are detailed instructions on configurations for each module.

• monitorX Host

  • Windows - This module doesn't need any configurations.
  • Linux - Set the LD_LIBRARY_PATH variable to the <dir>/monitorX/build/lib path relative this folder using the following command

      export LD_LIBRARY_PATH=$LD_LIBRARYPATH;<dir>/monitorX/build/lib

• monitorX Arduino visualizer

  For this module you will need to upload code to an Atmega MCU. You can use Arduino IDE to build and upload the code. Binaries for some boards are included. After this process open the monitorX host application and

  • Windows - in Connect menu select the port to connect.
  • Linux - click Connect in menu bar and input the port's full path. E.g. /dev/ttyS1

  Connect your LCD module to your Arduino board following this scheme. Provided binaries are builded for this connection and for 20x4 sized LCD modules

  

---

Third party software

Qt library

Arduino IDE