WS2812 changed timing requirements

The timing requirements for the ws2812 board changed in newer controllers. The old timings in libraries bring the LEDs into an unstable state (flickering, turning off suddenly). Especially when using mixed colors or white.

The datasheet infos can be found here:
New timings (page 3, data transfer time): https://datasheet.lcsc.com/szlcsc/2006151006_Worldsemi-WS2812B-B_C114586.pdf
Old timings (page 4, data transfer time): https://cdn-shop.adafruit.com/datasheets/WS2812.pdf

The newer LEDs can not be used successfully with the ws2812 and neopixel library.
Is there any way to change the bit-timings manually? Or can the libraries be updated with the new timings?

Best regards
Nils

Hi,

we already found the problem. It was not timing related.

The solution is, that the delivered WS2812B doesn't correspond to the provided datasheet. According to the datasheets "Typical application", no capacitors in front of LEDs are necessary. However, if there is no capacitor (e.g. 100nF) directly in front of the LED, the LED controller crashes when more than one color of the pixel is switched on.

Best regards.
Nils