[PW_SID:1082108] Bluetooth: btintel_pcie: Add ACPI dependency#95
Open
BluezTestBot wants to merge 101 commits intoworkflowfrom
Open
[PW_SID:1082108] Bluetooth: btintel_pcie: Add ACPI dependency#95BluezTestBot wants to merge 101 commits intoworkflowfrom
BluezTestBot wants to merge 101 commits intoworkflowfrom
Conversation
Add VID 0489 & PID e174 for MediaTek MT7922 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e174 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some controller firmwares (eg for MT7925) continuously send invalid ISO packet, which result to "ISO unknown handle" error spam in logs. It's not important to show all of them to the user. Rate limit these ISO error messages, similarly as we do for SCO. Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no point in having the label since all it does is return the value in the 'err' variable. Instead make every goto return directly and remove the label. Signed-off-by: Dongyang Jin <jindongyang@kylinos.cn> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If retries are exhausted, driver should not do futher operation. During mt79xx firmware download process, if the retry count reaches0, driver will return an -EIO error and release the firmware resources. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To prevent abnormal controller states, it is necessary to check status in another part of the mt79xx firmware setup. During this process, receiving the 'BTMTK_WMT_PATCH_PROGRESS' status is unexpected. If this occurs, it should be treated as an error, and driver must be prevented from continuing execution. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a new flag 'BTMTK_FIRMWARE_DL_RETRY'. If an error occurs during mt79xx firmware download process, this flag will be set and cleared after a reset. If the flag is already set and firmware still cannot be loaded successfully after a reset, no further reset attempts will be made. In other words, if there is a problem during firmware download, only one reset will be attempted. Signed-off-by: Chris Lu <chris.lu@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Whenever new chipset support is added to the driver code, we ended up adding chipset name to the last of the switch case arising code readability issue because of improper sorting of the chipset names in various places of the code. Refactor code such a way that new chipset can be added easily in the code without compromising code readability. Signed-off-by: Vivek Sahu <vivek.sahu@oss.qualcomm.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds the device ID for the BCM4343A2 module, found e.g. in the muRata 1YN WiFi+BT combined device. The required firmware file is named 'BCM4343A2.hcd'. Signed-off-by: Marek Vasut <marex@nabladev.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The function called qca_power_off() is actually the hci_dev shutdown handler, rename it to qca_hci_shutdown() to make this clear. While the qca_power_shutdown() function is actually the counter-part of qca_power_on() rename it to qca_power_off() to make this clear. Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The BT core skips calling the hci_dev's shutdown method when the HCI is unregistered. This means that qca_power_off() was not getting called leaving BT powered on. This causes regulators / pwrseq providers to not get disabled which also causes problem when re-loading the module because regulators and pwrseq providers have an enablecount which now has never dropped to 0, causing the BT to not get properly reset between rmmod and re-load which causes initialization failure on the re-load. Fix this by calling qca_power_off() from qca_close() when BT has not already been powered off through a qca_hci_shutdown() call. hci_ldisc.c will call qca_close() after freeing the hdev, so this means that qca_power_off() can now no longer deref hu->hdev, change the logging in qca_power_off() to no longer use hu->hdev. Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com> Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add USB device ID (04ca:3807) for a Lite-On Wireless_Device containing a MediaTek MT7921 (MT7920) Bluetooth chipset found in Acer laptops. Without this entry, btusb binds via the generic USB class-based wildcard match but never sets the BTUSB_MEDIATEK flag. This means btmtk never triggers firmware loading, and the driver sends a raw HCI Reset that the uninitialized chip cannot respond to, resulting in: Bluetooth: hci0: Opcode 0x0c03 failed: -110 The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below: T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#=5 Spd=480 MxCh=0 P: Vendor=04ca ProdID=3807 Rev=1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Dylan Eray <dylan.eray6@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use struct_size(), which provides additional compile-time checks for structures with flexible array members (e.g., __must_be_array()), to determine the allocation size for a new 'struct hci_drv_rp_read_info'. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add MT7902 device ID and firmware filename to enable MCU firmware loading. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add VID 13d3 & PID 3579 for MediaTek MT7902 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=04 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3579 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add VID 13d3 & PID 3580 for MediaTek MT7902 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3580 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add VID 13d3 & PID 3594 for MediaTek MT7902 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3594 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add VID 13d3 & PID 3596 for MediaTek MT7902 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=07 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3596 Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I: If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Co-developed-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Kush Kulshrestha <kush.kulshrestha.5@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add VID 0e8d & PID 1ede for MediaTek MT7902 USB Bluetooth chip. The information in /sys/kernel/debug/usb/devices about the Bluetooth device is listed as the below. T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0e8d ProdID=1ede Rev= 1.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=000000000 C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA A: FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us E: Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us Co-developed-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add MT7902 Bluetooth SDIO support by introducing chip data and registering the device ID. Runtime PM is not yet supported by the driver, but normal operation is unaffected. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 6.0, Vol 3, Part A, 3.4.3: "If the SDU length field value exceeds the receiver's MTU, the receiver shall disconnect the channel..." This fixes L2CAP/LE/CFC/BV-26-C (running together with 'l2test -r -P 0x0027 -V le_public -I 100'). Fixes: aac23bf ("Bluetooth: Implement LE L2CAP reassembly") Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 6.0, Vol 3, Part A, 3.4.3: "... If the sum of the payload sizes for the K-frames exceeds the specified SDU length, the receiver shall disconnect the channel." This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P 0x0027 -V le_public'). Fixes: aac23bf ("Bluetooth: Implement LE L2CAP reassembly") Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The last test step ("Test with Invalid public key X and Y, all set to
0") expects to get an "DHKEY check failed" instead of "unspecified".
Fixes: 6d19628 ("Bluetooth: SMP: Fail if remote and local public keys are identical")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 6.0, Vol 3, Part A, 3.4.3: "... If the payload size of any K-frame exceeds the receiver's MPS, the receiver shall disconnect the channel..." This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P 0x0027 -V le_public -I 100'). Signed-off-by: Christian Eggers <ceggers@arri.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Tested-by: Christian Eggers <ceggers@arri.de>
iso-tester defer tests seem to fail with hci_conn_hash_lookup_cig being unable to resolve a cig in set_cig_params_sync due a race where it is run immediatelly before hci_bind_cis is able to set the QoS settings into the hci_conn object. So this moves the assigning of the QoS settings to be done directly by hci_le_set_cig_params to prevent that from happening again. Fixes: 26afbd8 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If FW image has hybrid signature (ECDSA and LMS) then send CSS header, ECDSA public key, ECDSA signature, LMS public key, LMS signature and command buffer to device. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use hardware variant instead of CNVi to send dsbr command. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for Intel Bluetooth Scorpious Peak2 core. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add DSBR support for Scorpious Peak2 cores onwards. Refer commit eb9e749 ("Bluetooth: btintel: Allow configuring drive strength of BRI") for details about DSBR. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Align each descriptor/index/context region to 128 bytes before calculating the total DMA pool size. This ensures the memory layout shared with firmware meets the 128-byte alignment requirement. The DMA pool alignment is also set to 128 bytes to match the firmware expectation for all shared structures. Signed-off-by: Kiran K <kiran.k@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
… sco_pi(sk)->codec copy_struct_from_sockptr() fill 'buffer' in sco_sock_setsockopt() with zeros, so there's no real problem. But it actually looks strange to do this, without checking all of codecs->codecs[0] really comes from userspace: sco_pi(sk)->codec = codecs->codecs[0]; As only optlen < sizeof(struct bt_codecs) is checked and codecs->num_codecs is not checked against != 1, but only <= 1, and the space for the additional struct bt_codec is not checked. Note I don't understand bluetooth and I didn't do any runtime tests with this! I just found it when debugging a problem in copy_struct_from_sockptr(). I just added this to check the size is as expected: BUILD_BUG_ON(struct_size(codecs, codecs, 0) != 1); BUILD_BUG_ON(struct_size(codecs, codecs, 1) != 8); And made sure it still compiles using this: make CF=-D__CHECK_ENDIAN__ W=1ce C=1 net/bluetooth/sco.o Fixes: 3e643e4 ("Bluetooth: Improve setsockopt() handling of malformed user input") Cc: Michal Luczaj <mhal@rbox.co> Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: David Wei <dw@davidwei.uk> Cc: linux-bluetooth@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
struct hci_std_codecs and struct hci_std_codecs_v2 are flexible
structures, this is structures that contain a flexible-array member
(__u8 codec[]; and struct hci_std_codec_v2 codec[];, correspondingly.)
Since struct hci_rp_read_local_supported_codecs and struct
hci_rp_read_local_supported_codecs_v2 are defined by hardware, we
create the new struct hci_std_codecs_hdr and struct hci_std_codecs_v2_hdr
types, and use them to replace the object types causing trouble in
struct hci_rp_read_local_supported_codecs and struct
hci_rp_read_local_supported_codecs_v2, namely struct hci_std_codecs
std_codecs; and struct hci_std_codecs_v2_hdr std_codecs;.
Also, once -fms-extensions is enabled, we can use transparent struct
members in both struct hci_std_codecs and struct hci_std_codecs_v2_hdr.
Notice that the newly created types does not contain the flex-array
member `codec`, which is the object causing the -Wfamnae warnings.
After these changes, the size of struct hci_rp_read_local_supported_codecs
and struct hci_rp_read_local_supported_codecs_v2, along with their
member's offsets remain the same, hence the memory layouts don't
change:
Before changes:
struct hci_rp_read_local_supported_codecs {
__u8 status; /* 0 1 */
struct hci_std_codecs std_codecs; /* 1 1 */
struct hci_vnd_codecs vnd_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
struct hci_rp_read_local_supported_codecs_v2 {
__u8 status; /* 0 1 */
struct hci_std_codecs_v2 std_codecs; /* 1 1 */
struct hci_vnd_codecs_v2 vendor_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
After changes:
struct hci_rp_read_local_supported_codecs {
__u8 status; /* 0 1 */
struct hci_std_codecs_hdr std_codecs; /* 1 1 */
struct hci_vnd_codecs vnd_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
struct hci_rp_read_local_supported_codecs_v2 {
__u8 status; /* 0 1 */
struct hci_std_codecs_v2_hdr std_codecs; /* 1 1 */
struct hci_vnd_codecs_v2 vendor_codecs; /* 2 1 */
/* size: 3, cachelines: 1, members: 3 */
/* last cacheline: 3 bytes */
} __attribute__((__packed__));
With these changes fix the following warnings:
include/net/bluetooth/hci.h:1490:31: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
include/net/bluetooth/hci.h:1525:34: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds workflow files for ci: [sync.yml] - The workflow file for scheduled work - Sync the repo with upstream repo and rebase the workflow branch - Review the patches in the patchwork and creates the PR if needed [ci.yml] - The workflow file for CI tasks - Run CI tests when PR is created Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
This replaces the bzcafe action with bluez/action-ci so we can maintain everything in the github bluez organization Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This attempts to sync every 5 minutes instead of 30. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
bluez/action-ci uses master as default branch for workflow which is incorrect for kernel Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The CI action now creates individual GitHub Check Runs per test, which requires 'checks: write' permission on the GITHUB_TOKEN. Also make the pull_request trigger types explicit to include 'reopened', allowing CI to be retriggered by closing and reopening a PR.
The btintel_pcie driver uses ACPI functions (acpi_has_method,
ACPI_HANDLE, acpi_evaluate_dsm) in btintel_pcie_acpi_reset_method()
but can be built without CONFIG_ACPI, leading to build failures
discovered by IBM CI:
drivers/bluetooth/btintel_pcie.c:2309:14: error: implicit declaration
of function 'acpi_has_method' [-Werror=implicit-function-declaration]
2309 | if (!acpi_has_method(handle, "_PRR")) {
| ^~~~~~~~~~~~~~~
Add ACPI dependency to the Kconfig entry to prevent building this
driver when ACPI is disabled, since the driver requires ACPI
functionality for its reset method.
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/ad624e0d-cfd7-4521-ae33-c5c3287b4204@linux.ibm.com/
Fixes: 912a499 ("Bluetooth: btintel_pcie: Support Product level reset")
Suggested-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
|
CheckPatch |
|
GitLint |
|
SubjectPrefix |
|
BuildKernel |
|
CheckAllWarning |
|
CheckSparse |
|
BuildKernel32 |
|
TestRunnerSetup |
|
TestRunner_l2cap-tester |
|
TestRunner_iso-tester |
|
TestRunner_bnep-tester |
|
TestRunner_mgmt-tester |
|
TestRunner_rfcomm-tester |
|
TestRunner_sco-tester |
|
TestRunner_ioctl-tester |
|
TestRunner_mesh-tester |
|
TestRunner_smp-tester |
|
TestRunner_userchan-tester |
|
TestRunner_6lowpan-tester |
|
IncrementalBuild |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
19 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
The btintel_pcie driver uses ACPI functions (acpi_has_method,
ACPI_HANDLE, acpi_evaluate_dsm) in btintel_pcie_acpi_reset_method()
but can be built without CONFIG_ACPI, leading to build failures
discovered by IBM CI:
drivers/bluetooth/btintel_pcie.c:2309:14: error: implicit declaration
of function 'acpi_has_method' [-Werror=implicit-function-declaration]
2309 | if (!acpi_has_method(handle, "_PRR")) {
| ^~~~~~~~~~~~~~~
Add ACPI dependency to the Kconfig entry to prevent building this
driver when ACPI is disabled, since the driver requires ACPI
functionality for its reset method.
Reported-by: Venkat Rao Bagalkote venkat88@linux.ibm.com
Closes: https://lore.kernel.org/all/ad624e0d-cfd7-4521-ae33-c5c3287b4204@linux.ibm.com/
Fixes: 912a499 ("Bluetooth: btintel_pcie: Support Product level reset")
Suggested-by: Rafael J. Wysocki rafael@kernel.org
Signed-off-by: Venkat Rao Bagalkote venkat88@linux.ibm.com
Hi Marcel and Luiz,
I'm submitting a fix for a build failure in the btintel_pcie driver when
CONFIG_ACPI is not set. Christophe Leroy helped identify that commit
912a499 introduced this issue.
drivers/bluetooth/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)