Skip to content

Servo Calibration

Brian Keating edited this page Jun 5, 2016 · 1 revision

A servo calibration shall consist of 4 numbers:

  1. min target (int)
  2. max target (int)
  3. degrees per microsecond (float)
  4. model name (optional string)

There are to be saved in yaml format to ~/.ros/servo_calibrations/<serial number>.yaml

Create a GUI to do this. It can use either alvar markers or the checkerboard. There should be sliders like in the maestro gui to allow the user to determine the min and max targets. There's also a button to start the automated calibration procedure, a field to enter the serial number, and a field to enter model name. After the relevant info is entered, and the automated calibration is complete, the "Commit" button is activated. Clicking it will write the yaml file to the config directory.

Clone this wiki locally