Skip to content

TX2 Setup

Brian Keating edited this page Dec 29, 2018 · 20 revisions

How-to guide for setting up a Nvidia TX2 for computer vision and robotics.

Initial Setup

  • Plug in peripherals: mouse, monitor, keyboard. My USB monitor did not work -- you need an HDMI monitor. I had a hard time installing via wifi, it's best to connect TX2 directly to the router.
  • Plug everything in, turn on the power
  • The first boot will print installation instructions and put you in a terminal. Follow the on screen instructions cd NVIDIA-INSTALLER, sudo ./installer.sh (password is nvidia). When it's done, sudo reboot now.
  • Install jetson jetpack using the instructions here. These instructions report the install of JetPack-L4T-3.2. Near the end of the flashing-to-TX2 step, it'll get stuck on "determining target ip". Setup your wifi using the GUI to complete the installation.
  • Update sudo apt update. I had problem with cuda PUB_KEY as described here. The fix is sudo apt-key adv --keyserver keyserver.ubuntu.com --recv-keys F60F4B3D7FA2AF80 before the update. DO NOT RUN sudo apt-get upgrade, IT BREAKS CUDA
  • Change passwords of users nvidia and ubuntu for security purposes (with passwd)
  • Turn off wifi power saving, it makes ssh connections slow and unstable. sudo iw dev wlan0 set power_save off does it, but it gets reset when the wifi reconnects (eg, on boot). To make it permanent, sudo nano /etc/NetworkManager/conf.d/default-wifi-powersave-on.conf and change the line to wifi.powersave = 2.
  • Set up public key auth. Make sure you can ssh to/from laptop.
  • Assign a static ip to the tx2 via the router
  • Edit /etc/hostname on the tx2 to give it a better name. Takes effect on reboot
  • Edit /etc/hosts on laptop to give the tx2's IP address a human readable name
  • Disable ubuntu account: sudo usermod --expiredate 1 ubuntu. You can re-enable them with sudo usermod --expiredate -1 ubuntu

Your default user is nvidia. I had a hard time changing the username...it's easiest to just keep it as nvidia and add to laptop .ssh/config:

Host tx2
    User nvidia

Fixing the host

Flashing the tx2 broke the apt update on my laptop, as described here. The fix is

sudo apt-get remove .*:arm64
sudo dpkg --remove-architecture arm64

ROS Install

Here's a convenient repo to install base ROS for you:

git clone https://github.com/jetsonhacks/installROSTX2.git cd installROSTX2 ./updateRepositories ./installROS.sh

I want to use the kinect, so sudo apt-get install ros-kinetic-openni-launch.

Add to .bashrc

source /opt/ros/indigo/setup.bash
export ROS_MASTER_URI=http://tx2:11311

Pytorch

sudo apt install python-pip
pip install --user typing
git clone https://github.com/pytorch/pytorch.git
git submodule update --init
cd pytorch
python setup.py install --user

Clone this wiki locally