MooBox for pi
This project is just for fun...
It consist of controling servo motors with buttons to make Moo Box turning and triggering the famous sound moooooooooooooooo.
GPIO 00 (pin 11) manage servo 1
GPIO 01 (pin 12) manage servo 2
GPIO 03 (pin 15) and 04 (pin 16) are set as pull_up and are listening a pull_down event
GPIO 13 (pin 21) manage the shutdown of the raspberry pi (the signal must be connected to the ground)
pin 2 is used to provide 5.5v power to servo
pin 6 is used as ground for servos and button
A 2100 ma power supply is used to power everything
/!\ Pi4J is needed /!\