Have acquired a Telestar Digibit R1..... made some progress but need a bit of support

[Opswidia]

hello, I hav acquired a Telestar Digibit R1. This is now connected to a 17x16 multiswitch. This multiswitch has Astra @ 19.2E, Hotbird @ 13.0E, Hispasat @ 30.0W and Eutelsat 5W @ 5.0W,

I can view the satip-axe "home page" at http://device_ip/8080.

Digging around with XML files in Winscp reveals the SATIP-AXE firmware is Catalinii so hence I am here with a few questions.

(a) How do I restore the original Telestar firmware?

(b) Where in the web pages do I set up the 4 inputs with the DiSEqC settings?

(c) Where do I tune in all the TV and radio channels?

(d) If I need front end software to do the above, what do I need? I have DVBviewer Pro and I can see the 4 Minisatip DVD tuners in the hardware list but where do I go to set up the Diseqc for the 4 satellites and how do I tune them in?

Regards,

Opswidia

[Jalle19]

Minisatip should work without any special configuration with your setup. You configure DiSeQc and perform tuning and scanning with your client.