Troubleshooting

Troubleshooting

Common problems and how to diagnose them. For anything not covered here, open the module's log from Logs in the UI, or open an issue at chodeus/chub/issues with the relevant excerpt.

Container / startup

Container won't start

docker compose logs chub

Look for one of these:

Configuration file not found: /config/config.yml — first-run case. Delete the container, make sure the /config bind-mount exists and is writable, start again. CHUB will create a default config.

Configuration validation failed — CHUB prints which field failed. Fix config.yml or remove the bad section and restart — missing sections fall back to defaults.

Address already in use — another process is holding port 8000. Either stop it or change the ports: line in your compose file.

Permission denied on /config — PUID/PGID don't match the owner of the bind-mount directory. Run chown -R <puid>:<pgid> /srv/apps/chub/config on the host.

Health check keeps failing

From inside the host:

curl http://localhost:8000/api/health

If that works but Docker's healthcheck fails, it's networking on the container — check docker inspect chub and confirm the port binding. A healthcheck timeout can also happen on slow first-launch DB init; raise start_period in your compose file to 90s.

First-run auth page doesn't appear

Hit GET /api/auth/status. If it returns { "configured": true } but you don't know the credentials, see Resetting the admin password below.

Auth

Login returns 429

The login rate limiter fired. Wait 5–10 seconds and retry. If you're hitting it during normal use, you're probably calling POST /api/auth/login in a script on every request — re-use one token (the default expiry is 24 hours; bump auth.token_expiry_hours for automation).

JWT expired mid-session

The frontend auto-redirects to the login page on 401. For scripting, just call POST /api/auth/login again to get a fresh token.

Forgot admin password

Two fixes:

From the command line (Docker Compose):

docker compose run --rm chub python3 main.py --reset-auth

Then restart CHUB — the first-run form will reappear.

By editing config: stop CHUB, open config/config.yml, delete the entire auth: block, start CHUB again.

Instances (Radarr / Sonarr / Lidarr / Plex)

Instance test fails

From Settings → Instances, click Test on the failing instance. Common causes:

• Connection refused — URL or port wrong. http://radarr:7878 only works if both containers are on the same Docker network.
• Timeout — the ARR isn't running or there's a firewall between them. Confirm from inside the CHUB container: docker compose exec chub curl -sS <url>/api/v3/system/status -H 'X-Api-Key: <key>'.
• 403 / 401 — wrong API key. Copy it fresh from the ARR's Settings → General → Security.
• "URL blocked by network safety check" — your URL resolves to a cloud-metadata or reserved internal range (a safety check, not a bug). Use a normal routable IP or hostname.

Plex returns 401

The api field for a Plex instance is the X-Plex-Token, not a Plex login. See Finding a Plex token.

Instance probe shows "healthy" but a module run fails

The 6-hour health probe only confirms basic connectivity, not the specific endpoints a module uses. Check the module's run log — it'll show the exact endpoint and status code that failed.

Live updates / cancellation

Dashboard doesn't update in real time

The browser should be receiving server-sent events from /api/modules/events. If it's not, it silently falls back to polling. Common causes:

• Reverse proxy buffering — Nginx buffers responses by default; that breaks SSE. Add proxy_buffering off; for the /api/modules/events location.
• Auth expired mid-stream — EventSource can't refresh tokens, so an expired JWT disconnects the stream. Refresh the page.
• Gzip on SSE — some proxies compress event streams, which breaks framing. Disable compression for that endpoint.

Cancel button doesn't always stop border_replacerr or plex_maintenance

Cancellation is cooperative: a module has to check a cancel flag in its loop. Most modules (poster_renamerr, poster_cleanarr, labelarr, jduparr, nohl, unmatched_assets, upgradinatorr, renameinatorr, health_checkarr, nestarr, sync_gdrive) stop on the next iteration.

border_replacerr does not check the flag yet — it runs to completion. Cancellation for it is on the roadmap.

plex_maintenance is partial: the PhotoTranscoder cleanup loop checks the flag and stops cleanly, but the three Plex-API tasks (empty_trash, clean_bundles, optimize_db) run to completion because Plex's API has no interrupt. Restart the container if you need to kill one of those mid-run.

Modules

poster_renamerr runs but nothing moves

Likely causes:

• dry_run: true in the module config.
• source_dirs empty or wrong.
• destination_dir isn't writable by PUID/PGID.
• No matching ARR items — enable debug log level and re-run; the log shows per-item match attempts.
• action_type: hardlink and source/destination are on different filesystems (hardlinks can't cross volumes). Switch to copy or move both paths to the same volume.

jduparr runs forever

It's hashing your whole library. The first run on a large tree takes hours; every run after that is fast because CHUB remembers what it hashed last time. To stop mid-run, go to Settings → Jobs → Cancel — it'll stop at the next file boundary.

sync_gdrive fails with "invalid path"

The path-safety guard rejects hash_database, sync_location, gdrive_sa_location, and folder IDs that contain null bytes or start with -. Rewrite the value so it doesn't.

poster_cleanarr does nothing

Check the mode. The module supports these values:

• report — dry-run; lists orphans without touching anything.
• move — relocates orphans to a Poster Cleanarr Restore folder.
• remove — deletes orphans outright.
• restore — moves anything in the restore folder back where it came from.
• clear — deletes the restore folder.
• nothing — skips image work but still runs empty_trash / clean_bundles / optimize_db if those flags are on.

If you're in report you'll see a list but no changes — that's by design. Switch to move first (easy to undo with restore) then remove once you trust it.

Also check that plex_path is a filesystem path to the Plex Metadata/ directory as visible from inside the CHUB container — not a URL.

Posters

Thumbnails are slow on first view

CHUB generates thumbnails on demand and caches them — the first view of a poster is slow, every view after that is instant. To pre-warm a whole library, click Backfill dimensions on the poster stats page and then browse the posters section.

Low-resolution filter returns nothing

CHUB needs to know each poster's size before the filter can match. Click Backfill dimensions on the poster stats page — it fills in the missing dimensions and the filter starts working.

Database

chub.db is locked

SQLite allows exactly one writer. You'll see this briefly during concurrent cancel / queue operations; CHUB retries automatically. If it persists, something else is holding a handle — typically a backup script or another container mounting the DB file.

Database is huge

From Settings → Jobs, use the bulk action to purge completed jobs older than 30 days. Health snapshots older than 30 days are pruned automatically on the next 6-hour tick.

Webhooks

Webhooks return 401

general.webhook_secret is set but the caller isn't sending X-Webhook-Secret or ?secret=. Copy the generated URL from Settings → Webhooks — it applies the secret for you.

Sonarr says "Test connection failed"

Almost always a network issue: Sonarr can't reach CHUB. Verify from inside Sonarr's container:

docker compose exec sonarr curl -I http://chub:8000/api/health

Logs

Log files fill the disk

Lower general.max_logs (default 9 rotated files per module). Old rotations are deleted automatically on the next write.

Log redaction ate a value I actually needed

CHUB automatically redacts things that look like secrets (tokens, API keys, webhook URLs). False positives should be rare — if it scrubbed something that wasn't a secret, open an issue with the pattern it caught.

Still stuck?

1. Switch the misbehaving module to log_level: debug and reproduce.
2. Grab the log excerpt (redacted is fine — CHUB scrubs secrets before writing).
3. Open an issue at chodeus/chub/issues with:
   • What you expected to happen
   • What happened instead
   • CHUB version (GET /api/version or the footer of the Settings page)
   • Container or bare-metal install
   • The log excerpt