[Moza] R3 scrub (1.2)

[leppie]

This is quite a really light feeling 'scrub drag' setup, but it keeps the details and allows some 'soft' clipping.

You can increase the effects you need from here with some experimentation.

Current LMUFFB version: 258

Config: https://gist.github.com/leppie/1d49833e94e4577dbbb64e0c3757efa0 (see diff for changes from default config)

LMU 1.2.4: Ingame: 70%, 0 smoothing, 60% collisions. Primary AMG GT3, but feels good (to me) on other GT3 too.

Moza pithouse:

• main forces 100
• Linear gain
• Road sens 10
• HOP off
• gear shift 3
• everything else 0 or 100 (what ever option fits first)
• game force effects has no effect (no blue/orange light)
• deadzone comp 0
• deadzone comp 0 (dont change, it messes with gain, exactly like below img)

Wheel: Formula mod on ESX
Firmware: 1.2.7.12

Wheelbase running temps are really low due to light config.

After 20 min race, 2nd line idle (uC, MOS, motor):

2026-03-20 21:31:48: 控制器温度[45°C]  MOS温度[43.21°C]  电机定子温度[37.3°C]
2026-03-20 23:04:48: 控制器温度[37°C]  MOS温度[32.81°C]  电机定子温度[24.88°C]

Tip: Use Moza Torque Monitor to see final output (helps judge soft clipping acceptability ).

[leppie]

Previous versions:

207: https://gist.github.com/leppie/eaaee3b31b71b32247fe854774322c68

[Dexter6610]

Hi Leppie, I'm using a Moza R3 with the ES Formula wheel and mainly driving the Lexus RC F LMGT3 in LMU. I'm currently using your gt3.toml preset. I noticed the README mentions gt3-high and gt3-med (use on Ford/AMG), but the current repo only has gt3.toml. Could you clarify which version gt3.toml corresponds to, and whether you recommend any different settings specifically for the Lexus on an R3?