Run your own voice infrastructure on a single Linux box. Bring your own SIP trunk (Twilio, Telnyx, …), run one install script, and you get:

• Voice calls with browser-based dialers for agents
• Phone numbers, queues, call recording
• Call transcription, AI summaries, sentiment, semantic search
• A real-time AI voice bot
• Multi-tenant orgs, API keys, webhooks

🎬 Watch the installation walkthrough — from blank server to first call:

• A Linux host with a public IPv4 — Ubuntu 22.04+ / Debian 12+ (a $12/mo DigitalOcean droplet with 2 vCPU / 4 GB RAM is plenty)
• A domain name you can point at it
• A SIP trunk (Twilio, Telnyx, Bandwidth, …) if you want to make/receive real phone calls

Create a DNS A record (e.g. voice.yourdomain.com) pointing at the host's public IPv4. Verify with dig +short voice.yourdomain.com before continuing — the HTTPS certificate can't be issued until DNS resolves.

SSH into the host and run:

curl -fsSL https://raw.githubusercontent.com/comcent-io/comcent-ce/main/install.sh | bash

Takes ~30 seconds: installs Docker if missing, generates secrets, and writes docker-compose.yaml + .env into ~/comcent-ce/. It does not start anything yet.

nano ~/comcent-ce/.env

Search for replaceMe and fill every one in:

Optional (leave blank to disable): DEEPGRAM_API_KEY (transcription, voice bot), OPENAI_API_KEY (AI summaries, voice bot), Sentry DSNs.

cd ~/comcent-ce
docker compose up -d

First run pulls ≈800 MB of images and takes 5–10 minutes — that's normal. The HTTPS certificate is issued about a minute after start.

Once up, the server prints a one-time setup token for creating the first admin account. Grab it from the logs:

docker compose logs server | grep -A 10 "FIRST-RUN SETUP"

Then open https://voice.yourdomain.com/setup, enter the token along with your name, email, password, and organization details. Done — you're the super-admin.

(Lost the token? It's re-printed on every server start until claimed — docker compose restart server, then grep again.)

To make and receive real phone calls, open Sip Trunk in the sidebar, hit Create, and fill in:

• Name — anything, e.g. twilio.
• Provide Outbound Credentials — tick only if your trunk uses username/password auth instead of IP-based auth.
• SIP Proxy Address — your provider's termination URI (e.g. mytrunk.pstn.twilio.com).
• Inbound IPs to whitelist — comma-separated IPs/domains your provider sends calls from.

On the trunk provider's side:

• Whitelist your host's public IP (<YOUR_IP>/32) — e.g. Twilio's IP Access Control Lists on an Elastic SIP Trunk.
• Point inbound calls (Origination) at sip:<YOUR_DOMAIN>?transport=udp.
• Route your phone number to the trunk, so calls to it reach this server. Every provider names this differently — on Twilio you assign the number to the Elastic SIP Trunk.

Routing the number to the trunk on the provider's side isn't enough — Comcent also needs to know the number and what to do with calls to it. Open Numbers in the sidebar, hit Add, and fill in:

• Name — a friendly label.
• Number (E.164) — the number you bought, e.g. +15551234567.
• SIP Trunk — pick the trunk from step 6.
• Allow Outbound if destination matches regex — optional; restrict which destinations can be dialed from this number (e.g. ^\+1[0-9]{10}$ for US only).

Then build the inbound flow in the graph editor below — it decides what happens when someone calls the number:

1. Add step and pick a node: Queue (route to agents in a queue — create one under Queues first), Dial / DialGroup (ring specific agents), Menu (IVR keypad menu), Play (play audio), WeekTime (business-hours branching), or VoiceBot (AI voice bot — needs the Deepgram/OpenAI keys from step 4).
2. Drag it into place.
3. Connect Start to the first node, and node outlets onward.

The simplest working flow is Start → Dial with To set to your own username (the SIP username you chose during setup). Hit Add to save, then call your number — it rings in your browser dialer.

cd ~/comcent-ce
docker compose pull
docker compose up -d

Migrations run automatically on every server start.

Sign-up email never arrives. SMTP_URL is unset or wrong. For one-off testing you can run a Mailhog container and set SMTP_URL=smtp://mailhog:1025.

https://... shows a Traefik default cert. Let's Encrypt couldn't issue. Check docker compose logs traefik — usually DNS not yet pointing at the host, or port 80 blocked.

SIP trunk returns 403 on outbound. Your host's public IP is not on the trunk's IP allow list. Add <your-IP>/32.

Browser dialer can't register. The dialer connects to wss://<COMCENT_DOMAIN>:5063/sip-ws. Confirm port 5063/TCP is open and serving a valid Let's Encrypt cert:

echo | openssl s_client -connect voice.yourdomain.com:5063 -servername voice.yourdomain.com 2>/dev/null \
  | openssl x509 -noout -subject -issuer -dates

Billing & metered usage, GDPR workflows, audit logs, SLA tracking, outbound campaigns, executive summaries → https://comcent.io/enterprise

Comcent CE is free and AGPL-licensed. If it's saving you the cost of a call-center SaaS, consider sponsoring development — it funds the time spent maintaining and improving the community edition.

👉 GitHub Sponsors

See SPONSORS.md for the people and companies already backing this project.

AGPL-3.0. See LICENSE. Commercial licenses available — contact the maintainer.

Want to hack on Comcent CE itself? See CONTRIBUTING.md.