Merge branch 'pci/controller/qcom'

- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
  writing out all the clock names (Manivannan Sadhasivam)

- Add DT binding and driver support for the SA8775P SoC (Mrinmay Sarkar)

- Refactor dw_pcie_edma_find_chip() to enable adding support for Hyper DMA
  (HDMA) (Manivannan Sadhasivam)

- Enable drivers to supply the eDMA channel count since some can't auto
  detect this (Manivannan Sadhasivam)

- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)

- Override the SA8775P NO_SNOOP default to avoid possible memory corruption
  (Mrinmay Sarkar)

- Make sure resources are disabled during PERST# assertion, even if the
  link is already disabled (Manivannan Sadhasivam)

- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays active
  even if other drivers don't vote for it (Krishna chaitanya chundru)

- Add Operating Performance Points (OPP) to scale performance state based
  on aggregate link bandwidth to improve SoC power efficiency (Krishna
  chaitanya chundru)

- Return failure instead of success if dev_pm_opp_find_freq_floor() fails
  (Dan Carpenter)

- Avoid an error pointer dereference if dev_pm_opp_find_freq_exact() fails
  (Dan Carpenter)

- Prevent use of uninitialized data in qcom_pcie_suspend_noirq() (Dan
  Carpenter)

* pci/controller/qcom:
  PCI: qcom: Prevent use of uninitialized data in qcom_pcie_suspend_noirq()
  PCI: qcom: Prevent potential error pointer dereference
  PCI: qcom: Fix missing error code in qcom_pcie_probe()
  PCI: qcom: Add OPP support to scale performance
  PCI: Bring the PCIe speed to MBps logic to new pcie_dev_speed_mbps()
  PCI: qcom: Add ICC bandwidth vote for CPU to PCIe path
  PCI: qcom-ep: Disable resources unconditionally during PERST# assert
  PCI: qcom-ep: Override NO_SNOOP attribute for SA8775P EP
  PCI: qcom: Override NO_SNOOP attribute for SA8775P RC
  PCI: epf-mhi: Enable HDMA for SA8775P SoC
  PCI: qcom-ep: Add HDMA support for SA8775P SoC
  PCI: dwc: Pass the eDMA mapping format flag directly from glue drivers
  PCI: dwc: Skip finding eDMA channels count for HDMA platforms
  PCI: dwc: Refactor dw_pcie_edma_find_chip() API
  PCI: qcom-ep: Add support for SA8775P SOC
  dt-bindings: PCI: qcom-ep: Add support for SA8775P SoC
  PCI: qcom: Use devm_clk_bulk_get_all() API

Author: bjorn-helgaas

Documentation/devicetree/bindings/pci/qcom,pcie-ep.yaml

@@ -13,36 +13,41 @@ properties:
   compatible:
     oneOf:
       - enum:
+          - qcom,sa8775p-pcie-ep
           - qcom,sdx55-pcie-ep
           - qcom,sm8450-pcie-ep
       - items:
           - const: qcom,sdx65-pcie-ep
           - const: qcom,sdx55-pcie-ep
 
   reg:
+    minItems: 6
     items:
       - description: Qualcomm-specific PARF configuration registers
       - description: DesignWare PCIe registers
       - description: External local bus interface registers
       - description: Address Translation Unit (ATU) registers
       - description: Memory region used to map remote RC address space
       - description: BAR memory region
+      - description: DMA register space
 
   reg-names:
+    minItems: 6
     items:
       - const: parf
       - const: dbi
       - const: elbi
       - const: atu
       - const: addr_space
       - const: mmio
+      - const: dma
 
   clocks:
-    minItems: 7
+    minItems: 5
     maxItems: 8
 
   clock-names:
-    minItems: 7
+    minItems: 5
     maxItems: 8
 
   qcom,perst-regs:
@@ -57,14 +62,18 @@ properties:
           - description: Perst separation enable offset
 
   interrupts:
+    minItems: 2
     items:
       - description: PCIe Global interrupt
       - description: PCIe Doorbell interrupt
+      - description: DMA interrupt
 
   interrupt-names:
+    minItems: 2
     items:
       - const: global
       - const: doorbell
+      - const: dma
 
   reset-gpios:
     description: GPIO used as PERST# input signal
@@ -125,6 +134,10 @@ allOf:
               - qcom,sdx55-pcie-ep
     then:
       properties:
+        reg:
+          maxItems: 6
+        reg-names:
+          maxItems: 6
         clocks:
           items:
             - description: PCIe Auxiliary clock
@@ -143,6 +156,10 @@ allOf:
             - const: slave_q2a
             - const: sleep
             - const: ref
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          maxItems: 2
 
   - if:
       properties:
@@ -152,6 +169,10 @@ allOf:
               - qcom,sm8450-pcie-ep
     then:
       properties:
+        reg:
+          maxItems: 6
+        reg-names:
+          maxItems: 6
         clocks:
           items:
             - description: PCIe Auxiliary clock
@@ -172,6 +193,45 @@ allOf:
             - const: ref
             - const: ddrss_sf_tbu
             - const: aggre_noc_axi
+        interrupts:
+          maxItems: 2
+        interrupt-names:
+          maxItems: 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-pcie-ep
+    then:
+      properties:
+        reg:
+          minItems: 7
+          maxItems: 7
+        reg-names:
+          minItems: 7
+          maxItems: 7
+        clocks:
+          items:
+            - description: PCIe Auxiliary clock
+            - description: PCIe CFG AHB clock
+            - description: PCIe Master AXI clock
+            - description: PCIe Slave AXI clock
+            - description: PCIe Slave Q2A AXI clock
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg
+            - const: bus_master
+            - const: bus_slave
+            - const: slave_q2a
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          minItems: 3
+          maxItems: 3
 
 unevaluatedProperties: false
 

drivers/pci/controller/dwc/pcie-designware.c

@@ -870,30 +870,40 @@ static struct dw_edma_plat_ops dw_pcie_edma_ops = {
 	.irq_vector = dw_pcie_edma_irq_vector,
 };
 
-static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
+static void dw_pcie_edma_init_data(struct dw_pcie *pci)
+{
+	pci->edma.dev = pci->dev;
+
+	if (!pci->edma.ops)
+		pci->edma.ops = &dw_pcie_edma_ops;
+
+	pci->edma.flags |= DW_EDMA_CHIP_LOCAL;
+}
+
+static int dw_pcie_edma_find_mf(struct dw_pcie *pci)
 {
 	u32 val;
 
+	/*
+	 * Bail out finding the mapping format if it is already set by the glue
+	 * driver. Also ensure that the edma.reg_base is pointing to a valid
+	 * memory region.
+	 */
+	if (pci->edma.mf != EDMA_MF_EDMA_LEGACY)
+		return pci->edma.reg_base ? 0 : -ENODEV;
+
 	/*
 	 * Indirect eDMA CSRs access has been completely removed since v5.40a
 	 * thus no space is now reserved for the eDMA channels viewport and
 	 * former DMA CTRL register is no longer fixed to FFs.
-	 *
-	 * Note that Renesas R-Car S4-8's PCIe controllers for unknown reason
-	 * have zeros in the eDMA CTRL register even though the HW-manual
-	 * explicitly states there must FFs if the unrolled mapping is enabled.
-	 * For such cases the low-level drivers are supposed to manually
-	 * activate the unrolled mapping to bypass the auto-detection procedure.
 	 */
-	if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL))
+	if (dw_pcie_ver_is_ge(pci, 540A))
 		val = 0xFFFFFFFF;
 	else
 		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
 
 	if (val == 0xFFFFFFFF && pci->edma.reg_base) {
 		pci->edma.mf = EDMA_MF_EDMA_UNROLL;
-
-		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
 	} else if (val != 0xFFFFFFFF) {
 		pci->edma.mf = EDMA_MF_EDMA_LEGACY;
 
@@ -902,15 +912,25 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 		return -ENODEV;
 	}
 
-	pci->edma.dev = pci->dev;
+	return 0;
+}
 
-	if (!pci->edma.ops)
-		pci->edma.ops = &dw_pcie_edma_ops;
+static int dw_pcie_edma_find_channels(struct dw_pcie *pci)
+{
+	u32 val;
 
-	pci->edma.flags |= DW_EDMA_CHIP_LOCAL;
+	/*
+	 * Autodetect the read/write channels count only for non-HDMA platforms.
+	 * HDMA platforms with native CSR mapping doesn't support autodetect,
+	 * so the glue drivers should've passed the valid count already. If not,
+	 * the below sanity check will catch it.
+	 */
+	if (pci->edma.mf != EDMA_MF_HDMA_NATIVE) {
+		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
 
-	pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
-	pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
+		pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
+		pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
+	}
 
 	/* Sanity check the channels count if the mapping was incorrect */
 	if (!pci->edma.ll_wr_cnt || pci->edma.ll_wr_cnt > EDMA_MAX_WR_CH ||
@@ -920,6 +940,19 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 	return 0;
 }
 
+static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
+{
+	int ret;
+
+	dw_pcie_edma_init_data(pci);
+
+	ret = dw_pcie_edma_find_mf(pci);
+	if (ret)
+		return ret;
+
+	return dw_pcie_edma_find_channels(pci);
+}
+
 static int dw_pcie_edma_irq_verify(struct dw_pcie *pci)
 {
 	struct platform_device *pdev = to_platform_device(pci->dev);

drivers/pci/controller/dwc/pcie-designware.h

@@ -51,9 +51,8 @@
 
 /* DWC PCIe controller capabilities */
 #define DW_PCIE_CAP_REQ_RES		0
-#define DW_PCIE_CAP_EDMA_UNROLL		1
-#define DW_PCIE_CAP_IATU_UNROLL		2
-#define DW_PCIE_CAP_CDM_CHECK		3
+#define DW_PCIE_CAP_IATU_UNROLL		1
+#define DW_PCIE_CAP_CDM_CHECK		2
 
 #define dw_pcie_cap_is(_pci, _cap) \
 	test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)

drivers/pci/controller/dwc/pcie-qcom-ep.c

@@ -47,6 +47,7 @@
 #define PARF_DBI_BASE_ADDR_HI			0x354
 #define PARF_SLV_ADDR_SPACE_SIZE		0x358
 #define PARF_SLV_ADDR_SPACE_SIZE_HI		0x35c
+#define PARF_NO_SNOOP_OVERIDE			0x3d4
 #define PARF_ATU_BASE_ADDR			0x634
 #define PARF_ATU_BASE_ADDR_HI			0x638
 #define PARF_SRIS_MODE				0x644
@@ -86,6 +87,10 @@
 #define PARF_DEBUG_INT_CFG_BUS_MASTER_EN	BIT(2)
 #define PARF_DEBUG_INT_RADM_PM_TURNOFF		BIT(3)
 
+/* PARF_NO_SNOOP_OVERIDE register fields */
+#define WR_NO_SNOOP_OVERIDE_EN                 BIT(1)
+#define RD_NO_SNOOP_OVERIDE_EN                 BIT(3)
+
 /* PARF_DEVICE_TYPE register fields */
 #define PARF_DEVICE_TYPE_EP			0x0
 
@@ -149,6 +154,16 @@ enum qcom_pcie_ep_link_status {
 	QCOM_PCIE_EP_LINK_DOWN,
 };
 
+/**
+ * struct qcom_pcie_ep_cfg - Per SoC config struct
+ * @hdma_support: HDMA support on this SoC
+ * @override_no_snoop: Override NO_SNOOP attribute in TLP to enable cache snooping
+ */
+struct qcom_pcie_ep_cfg {
+	bool hdma_support;
+	bool override_no_snoop;
+};
+
 /**
  * struct qcom_pcie_ep - Qualcomm PCIe Endpoint Controller
  * @pci: Designware PCIe controller struct
@@ -167,6 +182,7 @@ enum qcom_pcie_ep_link_status {
  * @num_clks: PCIe clocks count
  * @perst_en: Flag for PERST enable
  * @perst_sep_en: Flag for PERST separation enable
+ * @cfg: PCIe EP config struct
  * @link_status: PCIe Link status
  * @global_irq: Qualcomm PCIe specific Global IRQ
  * @perst_irq: PERST# IRQ
@@ -194,6 +210,7 @@ struct qcom_pcie_ep {
 	u32 perst_en;
 	u32 perst_sep_en;
 
+	const struct qcom_pcie_ep_cfg *cfg;
 	enum qcom_pcie_ep_link_status link_status;
 	int global_irq;
 	int perst_irq;
@@ -489,6 +506,10 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
 	val |= BIT(8);
 	writel_relaxed(val, pcie_ep->parf + PARF_LTSSM);
 
+	if (pcie_ep->cfg && pcie_ep->cfg->override_no_snoop)
+		writel_relaxed(WR_NO_SNOOP_OVERIDE_EN | RD_NO_SNOOP_OVERIDE_EN,
+				pcie_ep->parf + PARF_NO_SNOOP_OVERIDE);
+
 	return 0;
 
 err_disable_resources:
@@ -500,12 +521,6 @@ static int qcom_pcie_perst_deassert(struct dw_pcie *pci)
 static void qcom_pcie_perst_assert(struct dw_pcie *pci)
 {
 	struct qcom_pcie_ep *pcie_ep = to_pcie_ep(pci);
-	struct device *dev = pci->dev;
-
-	if (pcie_ep->link_status == QCOM_PCIE_EP_LINK_DISABLED) {
-		dev_dbg(dev, "Link is already disabled\n");
-		return;
-	}
 
 	pci_epc_deinit_notify(pci->ep.epc);
 	dw_pcie_ep_cleanup(&pci->ep);
@@ -817,6 +832,14 @@ static int qcom_pcie_ep_probe(struct platform_device *pdev)
 	pcie_ep->pci.ops = &pci_ops;
 	pcie_ep->pci.ep.ops = &pci_ep_ops;
 	pcie_ep->pci.edma.nr_irqs = 1;
+
+	pcie_ep->cfg = of_device_get_match_data(dev);
+	if (pcie_ep->cfg && pcie_ep->cfg->hdma_support) {
+		pcie_ep->pci.edma.ll_wr_cnt = 8;
+		pcie_ep->pci.edma.ll_rd_cnt = 8;
+		pcie_ep->pci.edma.mf = EDMA_MF_HDMA_NATIVE;
+	}
+
 	platform_set_drvdata(pdev, pcie_ep);
 
 	ret = qcom_pcie_ep_get_resources(pdev, pcie_ep);
@@ -875,7 +898,13 @@ static void qcom_pcie_ep_remove(struct platform_device *pdev)
 	qcom_pcie_disable_resources(pcie_ep);
 }
 
+static const struct qcom_pcie_ep_cfg cfg_1_34_0 = {
+	.hdma_support = true,
+	.override_no_snoop = true,
+};
+
 static const struct of_device_id qcom_pcie_ep_match[] = {
+	{ .compatible = "qcom,sa8775p-pcie-ep", .data = &cfg_1_34_0},
 	{ .compatible = "qcom,sdx55-pcie-ep", },
 	{ .compatible = "qcom,sm8450-pcie-ep", },
 	{ }