A tool for watching a given file descriptor.
This program is intended for Linux users that would like to watch how fast is a file being read or written to and - in case of a read - when will the operation be completed. This can for example be useful during a compression of a file, when there's no ETA shown (like in 7zip's case it was actually the reason I wrote it).
The script should work immediately after downloading. It requires Python installed. To try running it, type "python fdwatch.py". For convenience, you might want to copy it to your /usr/bin or /usr/local directory and add it the executable permissions, like this:
cp fdwatch.py /usr/bin/fdwatch
chmod +x /usr/bin/fdwatch
This usually has to be done using the administrator account (use sudo -i or
su to switch to it - in case of problems, seek help from your Linux
distrubution's provider (usually that means "RTFM" - Read The Fabulous
Manual). Once completed, your terminal should react to a new command -
"fdwatch". Sometimes before the first use you might need to re-run the command
line shell or reload the executable cache (the first should imply the second).
For usage hints, read on.
To make fdwatch work, you must call it with two parameters - the process ID which holds the file you want to watch and the file descriptor number. Once you know these two numbers, just run the script like this (let's say 1234 is the process ID and 3 is the file descriptor number):
python fdwatch.py 1234 3
To find out the process ID of the program you're running, you can use ps and
grep programs. For example, to find out the process ID of a running 7z
program:
d33tah@d33tah-pc:/home/d33tah$ ps waux | grep 7z
d33tah 20563 0.0 0.0 9528 988 pts/3 S+ 23:28 0:00 /bin/sh /usr/bin/7z a traceroute.7z traceroute
d33tah 20564 173 2.3 233560 183212 pts/3 Rl+ 23:28 0:06 /usr/libexec/p7zip/7z a traceroute.7z traceroute
d33tah 20598 0.0 0.0 9044 548 pts/7 S+ 23:28 0:00 grep --color=auto 7z
Process ID's are in the second column. The last line is irrelevant, we should
probably look at processes number 20563 and 20564. To list the file descriptors
and the files they point to, we'll use ls -l, like this:
d33tah@d33tah-pc:/home/d33tah$ ls -l /proc/20563/fd
total 0
lrwx------. 1 d33tah d33tah 64 Jul 28 23:31 0 -> /dev/pts/3
lrwx------. 1 d33tah d33tah 64 Jul 28 23:31 1 -> /dev/pts/3
lrwx------. 1 d33tah d33tah 64 Jul 28 23:30 2 -> /dev/pts/3
lr-x------. 1 d33tah d33tah 64 Jul 28 23:31 255 -> /usr/bin/7z*
d33tah@d33tah-pc:/home/d33tah$ ls -l /proc/20564/fd
total 0
lrwx------. 1 d33tah d33tah 64 Jul 28 23:31 0 -> /dev/pts/3
lrwx------. 1 d33tah d33tah 64 Jul 28 23:31 1 -> /dev/pts/3
lrwx------. 1 d33tah d33tah 64 Jul 28 23:30 2 -> /dev/pts/3
l-wx------. 1 d33tah d33tah 64 Jul 28 23:31 3 -> /mnt/sda9/d33tah/traceroute.7z
lr-x------. 1 d33tah d33tah 64 Jul 28 23:31 4 -> /mnt/sda9/d33tah/traceroute
The first command didn't yield any interesting results, but the second shows us
the two files we'd like to watch - /mnt/sda9/d33tah/traceroute and
/mnt/sda9/d33tah/traceroute.7z. The 4 -> /mnt/sda9/d33tah/traceroute line
means that the file is open with file descriptor number 4. Now, that's enough
to start fdwatch. To make it estimate how long will the compression take, run
it now (your current working directory must contain fdwatch.py - if it doesn't,
prepend the path to it to the command or install the script - see above).
Here's an example:
d33tah@d33tah-pc:/home/d33tah$ python fdwatch.py 20564 4
4.81%, 9.0 MB/s, ETA: ETA=31m 55s
4.86%, 9.0 MB/s, ETA: ETA=31m 54s
(and it goes on, until the process finishes its job...)
Traceback (most recent call last):
File "/bin/fdwatch", line 83, in <module>
fd = open("/proc/%s/fdinfo/%s" % (pid,fdno))
IOError: [Errno 2] No such file or directory: '/proc/20564/fdinfo/4'
The script uses the /proc special Linux directory that contains info about processes - a separate directory for each process. The script opens the /proc/PID/fdinfo/FD-NUMBER file every second and compares the head position to the last saving state, calculating all the values needed.
The script's at the moment pretty poorly documented and I didn't go great lengths to make it user-friendly; patches are welcome, though! As for the bugs, if the file is being written to, you'll keep seeing 100% file read. There's also no error checking and during testing, the script sometimes crashed (actually, it's currently its way to notify the user that the process shut down).
I'm thinking of rewriting this toy to C language or turn it into an extension to "pv" program. Adding support for more platforms would be nice, too. It could probably also use more output options and perhaps some localization for non-English users. Also, maybe configurable polling intervals?
Please keep in mind, that it's you, dear user, that is most important here. Should you have an idea for a specific feature that you could find useful, let me know and I'll implement it if it fits my vision of the project.
This application was written by Jacek Wielemborek d33tah@gmail.com. My blog can be found here: http://deetah.jogger.pl/kategoria/english/
If you're not a viagra vendor, feel free to write me an e-mail, I'd be happy to hear that you use this program!
This program is Free Software and is protected by GNU General Public License version 3. Basically, it gives you four freedoms:
Freedom 0: The freedom to run the program for any purpose.
Freedom 1: The freedom to study how the program works, and change it to make it do what you wish.
Freedom 2: The freedom to redistribute copies so you can help your neighbor.
Freedom 3: The freedom to improve the program, and release your improvements (and modified versions in general) to the public, so that the whole community benefits.
In order to protect that freedom, you must share any changes you did to the program with me, under the same license. For details, read the LICENSE file attached to the program.