This printable is a drop-in replacement for the Macintosh Color Classic Fan Housing. Also known as part 805-0222.
- Noctua NF-A8 PWN FAN
- 2x S7051-42R springcontact (Mouser link)
- 1x PCB
- 2x (10mm M2 screw + nut)
- Order the PCB at your favorite PCB supplier with 1.6MM thickness. HASL finish is just fine.
- 3D print the housing. (*Support on build plate only!)
- Solder on the S7051-42R springs to the PCB
- Secure the PCB to the 3D printed bracket with 2 M2 screws
- Solder on the Yellow (+) and the black (-) cable of the fan to the other side of the board.
I will not be held liable for damages, injury or even death resulting from this part. Build and use this part only at your own risk.