Automations

Change 'entity_ids' in following automations accordingly 😉

Time of Use

Dependency: Czech Energy Spot Prices, Solcast PV Forecast

alias: Inverter Time of Use
description: >-
  Controls all Time of Use programs at once throughout the day based on the spot
  electricity price and solar forecast
triggers:
  - trigger: state
    entity_id:
      - sensor.grid_metrics_total_cost
      - binary_sensor.spot_electricity_is_cheapest
      - binary_sensor.energy_prices_electricity_is_below_average
    for:
      hours: 0
      minutes: 0
      seconds: 15
conditions: []
actions:
  - choose:
      - conditions:
          - condition: state
            entity_id: binary_sensor.energy_prices_electricity_is_cheapest
            state: "on"
          - condition: time
            before: "08:00:00"
        sequence:
          - sequence:
              - action: solcast.update_forecasts
                data: {}
              - action: solarman.write_multiple_registers
                metadata: {}
                data:
                  device: bd3eff81f9b0984e91f40426cba9c0e1
                  address: 166
                  values:
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - 1
                    - 1
                    - 1
                    - 1
                    - 1
                    - 1
      - conditions:
          - condition: state
            entity_id: binary_sensor.energy_prices_electricity_is_below_average
            state: "on"
          - condition: time
            before: "08:00:00"
        sequence:
          - sequence:
              - action: solcast.update_forecasts
                data: {}
              - action: solarman.write_multiple_registers
                metadata: {}
                data:
                  device: bd3eff81f9b0984e91f40426cba9c0e1
                  address: 166
                  values:
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - "{{ states('sensor.inverter_battery_precharge') }}"
                    - 0
                    - 0
                    - 0
                    - 0
                    - 0
                    - 0
      - conditions:
          - condition: state
            entity_id: binary_sensor.energy_prices_electricity_is_cheapest
            state: "on"
        sequence:
          - action: solarman.write_multiple_registers
            metadata: {}
            data:
              device: bd3eff81f9b0984e91f40426cba9c0e1
              address: 166
              values:
                - 90
                - 90
                - 90
                - 90
                - 90
                - 90
                - 1
                - 1
                - 1
                - 1
                - 1
                - 1
      - conditions:
          - condition: state
            entity_id: binary_sensor.energy_prices_electricity_is_below_average
            state: "on"
        sequence:
          - action: solarman.write_multiple_registers
            metadata: {}
            data:
              device: bd3eff81f9b0984e91f40426cba9c0e1
              address: 166
              values:
                - 80
                - 80
                - 80
                - 80
                - 80
                - 80
                - 0
                - 0
                - 0
                - 0
                - 0
                - 0
    default:
      - action: solarman.write_multiple_registers
        metadata: {}
        data:
          device: bd3eff81f9b0984e91f40426cba9c0e1
          address: 166
          values:
            - 20
            - 20
            - 20
            - 20
            - 20
            - 20
            - 1
            - 1
            - 1
            - 1
            - 1
            - 1
mode: single

*sensor.grid_metrics_total_cost holds price for current hour
*binary_sensor.energy_prices_electricity_is_cheapest is On during few cheapest hours
*binary_sensor.energy_prices_electricity_is_below_average is On during below average price hours

Everything is calculated including the distribution part of the price.

And create following template sensor sensor.inverter_battery_precharge:

{% set n = now() %}
{% set d = n.weekday() %}
{% set v = states('sensor.solcast_pv_forecast_forecast_today') | float %}
{% if n.hour > 6 %}
  {% set v = states('sensor.solcast_pv_forecast_forecast_tomorrow') | float %}
  {% set d = (d + 1) if d < 6 else 0 %}
{% endif %}
{% if v > 50 %}
  {{ 20 }}
{% elif v > 40 %}
  {{ 25 }}
{% elif v > 35 %}
  {{ 30 }}
{% elif v > 30 or (v > 20 and d > 4) %}
  {{ 40 }}
{% elif v > 25 or (v > 15 and d > 4) %}
  {{ 50 }}
{% elif v > 20 or (v > 10 and d > 4) %}
  {{ 60 }}
{% elif v > 10 or (v > 5 and d > 4) %}
  {{ 80 }}
{% else %}
  {{ 90 }}
{% endif %}

Grid Export Surplus

Description: Control energy surplus export according current spot price
Dependency: Czech Energy Spot Prices

alias: Inverter Grid Export Surplus
description: Export Surplus when non negative spot price
trigger:
  - platform: template
    value_template: "{% if has_value('sensor.current_spot_electricity_price') %}true{% endif %}"
condition: []
action:
  - choose:
      - conditions:
          - condition: numeric_state
            entity_id: sensor.current_spot_electricity_price
            below: 0
          - condition: state
            entity_id: switch.inverter_grid_export_surplus
            state: "on"
        sequence:
          - service: switch.turn_off
            metadata: {}
            data: {}
            target:
              entity_id: switch.inverter_grid_export_surplus
      - conditions:
          - condition: numeric_state
            entity_id: sensor.current_spot_electricity_price
            above: 0
          - condition: state
            entity_id: switch.inverter_grid_export_surplus
            state: "off"
        sequence:
          - service: switch.turn_on
            metadata: {}
            data: {}
            target:
              entity_id: switch.inverter_grid_export_surplus
mode: single

Time synchronization

alias: Inverter time synchronization
description: Set device's time to `now()`
trigger:
  - platform: time
    at: sensor.sun_next_dawn
  - event: start
    trigger: homeassistant
actions:
  - data:
      datetime: "{{ now() }}"
    target:
      entity_id: datetime.inverter_date_time
    action: datetime.set_value
mode: single

PVOutput Uploader

alias: PVOutput Uploader
description: Uploads production data to PVOutput
trigger:
  - platform: time_pattern
    minutes: /5
action:
  - service: rest_command.pvoutput_upload
    data: {}
mode: single

And configure RESTful Command in configuration.yaml:

rest_command:
  pvoutput_upload:
    url: https://pvoutput.org/service/r2/addstatus.jsp
    method: post
    content_type: "application/x-www-form-urlencoded"
    headers:
       X-Pvoutput-Apikey: KEY
       X-Pvoutput-SystemId: ID
    payload: "d={{now().strftime('%Y%m%d')}}&t={{now().strftime('%H:%M')}}&c1=1&v1={{(states('sensor.inverter_total_production'))|float*1000|round(0)}}"

Replace KEY and ID using yours. More 'bout the parameters here