[Deepin-Kernel-SIG] [Upstream] Update kernel base to 6.6.34 #295
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
commit 5bc9de0 upstream. When both hwmon and hwmon drvdata (on which hwmon depends) are device managed resources, the expectation, on device unbind, is that hwmon will be released before drvdata. However, in i915 there are two separate code paths, which both release either drvdata or hwmon and either can be released before the other. These code paths (for device unbind) are as follows (see also the bug referenced below): Call Trace: release_nodes+0x11/0x70 devres_release_group+0xb2/0x110 component_unbind_all+0x8d/0xa0 component_del+0xa5/0x140 intel_pxp_tee_component_fini+0x29/0x40 [i915] intel_pxp_fini+0x33/0x80 [i915] i915_driver_remove+0x4c/0x120 [i915] i915_pci_remove+0x19/0x30 [i915] pci_device_remove+0x32/0xa0 device_release_driver_internal+0x19c/0x200 unbind_store+0x9c/0xb0 and Call Trace: release_nodes+0x11/0x70 devres_release_all+0x8a/0xc0 device_unbind_cleanup+0x9/0x70 device_release_driver_internal+0x1c1/0x200 unbind_store+0x9c/0xb0 This means that in i915, if use devm, we cannot gurantee that hwmon will always be released before drvdata. Which means that we have a uaf if hwmon sysfs is accessed when drvdata has been released but hwmon hasn't. The only way out of this seems to be do get rid of devm_ and release/free everything explicitly during device unbind. v2: Change commit message and other minor code changes v3: Cleanup from i915_hwmon_register on error (Armin Wolf) v4: Eliminate potential static analyzer warning (Rodrigo) Eliminate fetch_and_zero (Jani) v5: Restore previous logic for ddat_gt->hwmon_dev error return (Andi) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10366 Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240417145646.793223-1-ashutosh.dixit@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6738025 upstream. Requesting a retune before switching to the RPMB partition has been observed to cause CRC errors on the RPMB reads (-EILSEQ). Since RPMB reads can not be retried, the clients would be directly affected by the errors. This commit disables the retune request prior to switching to the RPMB partition: mmc_retune_pause() no longer triggers a retune before the pause period begins. This was verified with the sdhci-of-arasan driver (ZynqMP) configured for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both cases, the error was easy to reproduce triggering every few tenths of reads. With this commit, systems that were utilizing OP-TEE to access RPMB variables will experience an enhanced performance. Specifically, when OP-TEE is configured to employ RPMB as a secure storage solution, it not only writes the data but also the secure filesystem within the partition. As a result, retrieving any variable involves multiple RPMB reads, typically around five. For context, on ZynqMP, each retune request consumed approximately 8ms. Consequently, reading any RPMB variable used to take at the very minimum 40ms. After droping the need to retune before switching to the RPMB partition, this is no longer the case. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29be910 upstream. Don't cross a mountpoint that explicitly specifies a backup volume (target is <vol>.backup) when starting from a backup volume. It it not uncommon to mount a volume's backup directly in the volume itself. This can cause tools that are not paying attention to get into a loop mounting the volume onto itself as they attempt to traverse the tree, leading to a variety of problems. This doesn't prevent the general case of loops in a sequence of mountpoints, but addresses a common special case in the same way as other afs clients. Reported-by: Jan Henrik Sylvester <jan.henrik.sylvester@uni-hamburg.de> Link: http://lists.infradead.org/pipermail/linux-afs/2024-May/008454.html Reported-by: Markus Suvanto <markus.suvanto@gmail.com> Link: http://lists.infradead.org/pipermail/linux-afs/2024-February/008074.html Signed-off-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/768760.1716567475@warthog.procyon.org.uk Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: linux-afs@lists.infradead.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97eb5d5 upstream. The referenced commit moved the setting of the Autoneg and pause bits early in sfp_parse_support(). However, we check whether the modes are empty before using the bitrate to set some modes. Setting these bits so early causes that test to always be false, preventing this working, and thus some modules that used to work no longer do. Move them just before the call to the quirk. Fixes: 8110633 ("net: sfp-bus: allow SFP quirks to override Autoneg and pause bits") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://lore.kernel.org/r/E1rPMJW-001Ahf-L0@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce4f78f upstream. In the current riscv implementation, blocking syscalls like read() may not correctly restart after being interrupted by ptrace. This problem arises when the syscall restart process in arch_do_signal_or_restart() is bypassed due to changes to the regs->cause register, such as an ebreak instruction. Steps to reproduce: 1. Interrupt the tracee process with PTRACE_SEIZE & PTRACE_INTERRUPT. 2. Backup original registers and instruction at new_pc. 3. Change pc to new_pc, and inject an instruction (like ebreak) to this address. 4. Resume with PTRACE_CONT and wait for the process to stop again after executing ebreak. 5. Restore original registers and instructions, and detach from the tracee process. 6. Now the read() syscall in tracee will return -1 with errno set to ERESTARTSYS. Specifically, during an interrupt, the regs->cause changes from EXC_SYSCALL to EXC_BREAKPOINT due to the injected ebreak, which is inaccessible via ptrace so we cannot restore it. This alteration breaks the syscall restart condition and ends the read() syscall with an ERESTARTSYS error. According to include/linux/errno.h, it should never be seen by user programs. X86 can avoid this issue as it checks the syscall condition using a register (orig_ax) exposed to user space. Arm64 handles syscall restart before calling get_signal, where it could be paused and inspected by ptrace/debugger. This patch adjusts the riscv implementation to arm64 style, which also checks syscall using a kernel register (syscallno). It ensures the syscall restart process is not bypassed when changes to the cause register occur, providing more consistent behavior across various architectures. For a simplified reproduction program, feel free to visit: https://github.com/ancientmodern/riscv-ptrace-bug-demo. Signed-off-by: Haorong Lu <ancientmodern4@gmail.com> Link: https://lore.kernel.org/r/20230803224458.4156006-1-ancientmodern4@gmail.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Cc: Conor Dooley <conor@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a747626 upstream. The mptcp_get_int_option() helper is needless open-coded in a couple of places, replace the duplicate code with the helper call. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: bd11dc4 ("mptcp: fix full TCP keep-alive support") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f71a33 upstream. Most TCP-level socket options get an integer from user space, and set the corresponding field under the msk-level socket lock. Reduce the code duplication moving such operations in the common code. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: bd11dc4 ("mptcp: fix full TCP keep-alive support") [ Without TCP_NOTSENT_LOWAT support, as it is not in this version, see commit 29b5e5e ("mptcp: implement TCP_NOTSENT_LOWAT support") ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd11dc4 upstream. SO_KEEPALIVE support has been added a while ago, as part of a series "adding SOL_SOCKET" support. To have a full control of this keep-alive feature, it is important to also support TCP_KEEP* socket options at the SOL_TCP level. Supporting them on the setsockopt() part is easy, it is just a matter of remembering each value in the MPTCP sock structure, and calling tcp_sock_set_keep*() helpers on each subflow. If the value is not modified (0), calling these helpers will not do anything. For the getsockopt() part, the corresponding value from the MPTCP sock structure or the default one is simply returned. All of this is very similar to other TCP_* socket options supported by MPTCP. It looks important for kernels supporting SO_KEEPALIVE, to also support TCP_KEEP* options as well: some apps seem to (wrongly) consider that if the former is supported, the latter ones will be supported as well. But also, not having this simple and isolated change is preventing MPTCP support in some apps, and libraries like GoLang [1]. This is why this patch is seen as a fix. Closes: multipath-tcp/mptcp_net-next#383 Fixes: 1b3e7ed ("mptcp: setsockopt: handle SO_KEEPALIVE and SO_PRIORITY") Link: golang/go#56539 [1] Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20240514011335.176158-3-martineau@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> [ conflicts in the same context, because commit 29b5e5e ("mptcp: implement TCP_NOTSENT_LOWAT support") is not in this version ] Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80eb4f6 upstream. Currently, each DEFLATE stream takes one 32 KiB permanent internal window buffer even if there is no running instance which uses DEFLATE algorithm. It's unexpected and wasteful on embedded devices with limited resources and servers with hundreds of CPU cores if DEFLATE is enabled but unused. Fixes: ffa09b3 ("erofs: DEFLATE compression support") Cc: <stable@vger.kernel.org> # 6.6+ Reviewed-by: Sandeep Dhavale <dhavale@google.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20240520090106.2898681-1-hsiangkao@linux.alibaba.com [ Gao Xiang: resolve trivial conflicts. ] Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4a5b36 upstream. One of our workloads (Postgres 14 + sysbench OLTP) regressed on newer upstream kernel and on further investigation, it seems like the cause is the always synchronous rstat flush in the count_shadow_nodes() added by the commit f82e6bf ("mm: memcg: use rstat for non-hierarchical stats"). On further inspection it seems like we don't really need accurate stats in this function as it was already approximating the amount of appropriate shadow entries to keep for maintaining the refault information. Since there is already 2 sec periodic rstat flush, we don't need exact stats here. Let's ratelimit the rstat flush in this code path. Link: https://lkml.kernel.org/r/20231228073055.4046430-1-shakeelb@google.com Fixes: f82e6bf ("mm: memcg: use rstat for non-hierarchical stats") Signed-off-by: Shakeel Butt <shakeelb@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Yosry Ahmed <yosryahmed@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1cd4bc9 upstream. Commit f58f45c ("vxlan: drop packets from invalid src-address") has recently been added to vxlan mainly in the context of source address snooping/learning so that when it is enabled, an entry in the FDB is not being created for an invalid address for the corresponding tunnel endpoint. Before commit f58f45c vxlan was similarly behaving as geneve in that it passed through whichever macs were set in the L2 header. It turns out that this change in behavior breaks setups, for example, Cilium with netkit in L3 mode for Pods as well as tunnel mode has been passing before the change in f58f45c for both vxlan and geneve. After mentioned change it is only passing for geneve as in case of vxlan packets are dropped due to vxlan_set_mac() returning false as source and destination macs are zero which for E/W traffic via tunnel is totally fine. Fix it by only opting into the is_valid_ether_addr() check in vxlan_set_mac() when in fact source address snooping/learning is actually enabled in vxlan. This is done by moving the check into vxlan_snoop(). With this change, the Cilium connectivity test suite passes again for both tunnel flavors. Fixes: f58f45c ("vxlan: drop packets from invalid src-address") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: David Bauer <mail@david-bauer.net> Cc: Ido Schimmel <idosch@nvidia.com> Cc: Nikolay Aleksandrov <razor@blackwall.org> Cc: Martin KaFai Lau <martin.lau@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Bauer <mail@david-bauer.net> Signed-off-by: David S. Miller <davem@davemloft.net> [ Backport note: vxlan snooping/learning not supported in 6.8 or older, so commit is simply a revert. ] Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bdd9fd upstream. The sockets used by udpgso_bench_tx aren't always ready when udpgso_bench_tx transmits packets. This issue is more prevalent in -rt kernels, but can occur in both. Replace the hacky sleep calls with a function that checks whether the ports in the namespace are ready for use. Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Lucas Karpinski <lkarpins@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> [PHLin: context adjustment for the differences in BPF_FILE] Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5173fe upstream. The blamed commit below introduce a dependency in some net self-tests towards a newly introduce helper script. Such script is currently not included into the TEST_PROGS_EXTENDED list and thus is not installed, causing failure for the relevant tests when executed from the install dir. Fix the issue updating the install targets. Fixes: 3bdd9fd ("selftests/net: synchronize udpgro tests' tx and rx connection") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/076e8758e21ff2061cc9f81640e7858df775f0a9.1706131762.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [PHLin: ignore the non-existing lib.sh] Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06efafd upstream. Some scripts are not tests themselves; they contain utility functions used by other tests. According to Documentation/dev-tools/kselftest.rst, such files should be listed in TEST_FILES. Move those utility scripts to TEST_FILES. Fixes: 1751eb4 ("selftests: net: use TEST_PROGS_EXTENDED") Fixes: 25ae948 ("selftests/net: add lib.sh") Fixes: b99ac18 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile") Fixes: f5173fe ("selftests: net: included needed helper in the install targets") Suggested-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> [PHLin: ignore the non-existing lib.sh] Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cedb7dd upstream. The sun4i_hdmi driver still uses the non-atomic variants of the encoder hooks, so let's convert to their atomic equivalents. Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-32-8f4af575fce2@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9ca6bc2 upstream. We're not doing anything special in atomic_mode_set so we can simply merge it into atomic_enable. Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev> Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240222-kms-hdmi-connector-state-v7-33-8f4af575fce2@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20faaf3 upstream. syzbot reports a kernel bug as below: F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4 ================================================================== BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline] BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076 CPU: 1 PID: 5076 Comm: syz-executor280 Not tainted 6.9.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline] current_nat_addr fs/f2fs/node.h:213 [inline] f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600 f2fs_xattr_fiemap fs/f2fs/data.c:1848 [inline] f2fs_fiemap+0x55d/0x1ee0 fs/f2fs/data.c:1925 ioctl_fiemap fs/ioctl.c:220 [inline] do_vfs_ioctl+0x1c07/0x2e50 fs/ioctl.c:838 __do_sys_ioctl fs/ioctl.c:902 [inline] __se_sys_ioctl+0x81/0x170 fs/ioctl.c:890 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is we missed to do sanity check on i_xattr_nid during f2fs_iget(), so that in fiemap() path, current_nat_addr() will access nat_bitmap w/ offset from invalid i_xattr_nid, result in triggering kasan bug report, fix it. Reported-and-tested-by: syzbot+3694e283cf5c40df6d14@syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/00000000000094036c0616e72a1d@google.com Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1115dd upstream. The driver should check whether the client provides the platform_data. The following log reveals it: [ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40 [ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414 [ 29.612820] Call Trace: [ 29.613030] <TASK> [ 29.613201] dump_stack_lvl+0x56/0x6f [ 29.613496] ? kmemdup+0x30/0x40 [ 29.613754] print_report.cold+0x494/0x6b7 [ 29.614082] ? kmemdup+0x30/0x40 [ 29.614340] kasan_report+0x8a/0x190 [ 29.614628] ? kmemdup+0x30/0x40 [ 29.614888] kasan_check_range+0x14d/0x1d0 [ 29.615213] memcpy+0x20/0x60 [ 29.615454] kmemdup+0x30/0x40 [ 29.615700] lgdt3306a_probe+0x52/0x310 [ 29.616339] i2c_device_probe+0x951/0xa90 Link: https://lore.kernel.org/linux-media/20220405095018.3993578-1-zheyuma97@gmail.com Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b2faf1 upstream. if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should be stop to avoid out-of-bounds read, so directly return -EINVAL. Signed-off-by: Bob Zhou <bob.zhou@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a86156 upstream. btree_iter is used in two ways: either allocated on the stack with a fixed size MAX_BSETS, or from a mempool with a dynamic size based on the specific cache set. Previously, the struct had a fixed-length array of size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized iterators, which causes UBSAN to complain. This patch uses the same approach as in bcachefs's sort_iter and splits the iterator into a btree_iter with a flexible array member and a btree_iter_stack which embeds a btree_iter as well as a fixed-length data array. Cc: stable@vger.kernel.org Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039368 Signed-off-by: Matthew Mirvish <matthew@mm12.xyz> Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20240509011117.2697-3-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f506e3e upstream. aSIFSTime is 10us for 2GHz band and 16us for 5GHz and 6GHz bands. Originally, it doesn't consider 6GHz band and use wrong value, so correct it accordingly. Cc: stable@vger.kernel.org Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://msgid.link/20240430020515.8399-1-pkshih@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4a8933 upstream. Commit defc9cd ("pata_legacy: resychronize with upstream changes and resubmit") missed to update legacy_exit(), so that it now fails to do any cleanup -- the loop body there can never be entered. Fix that and finally remove now useless nr_legacy_host variable... Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Fixes: defc9cd ("pata_legacy: resychronize with upstream changes and resubmit") Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Niklas Cassel <cassel@kernel.org> Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee5814d upstream. Since the fsverity sysctl registration runs as a builtin initcall, there is no corresponding sysctl deregistration and the resulting struct ctl_table_header is not used. This can cause a kmemleak warning just after the system boots up. (A pointer to the ctl_table_header is stored in the fsverity_sysctl_header static variable, which kmemleak should detect; however, the compiler can optimize out that variable.) Avoid the kmemleak warning by using register_sysctl_init() which is intended for use by builtin initcalls and uses kmemleak_not_leak(). Reported-by: Yi Zhang <yi.zhang@redhat.com> Closes: https://lore.kernel.org/r/CAHj4cs8DTSvR698UE040rs_pX1k-WVe7aR6N2OoXXuhXJPDC-w@mail.gmail.com Cc: stable@vger.kernel.org Reviewed-by: Joel Granados <j.granados@samsung.com> Link: https://lore.kernel.org/r/20240501025331.594183-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…peration commit 0a960ba upstream. The following commits loosened the permissions of /proc/<PID>/fdinfo/ directory, as well as the files within it, from 0500 to 0555 while also introducing a PTRACE_MODE_READ check between the current task and <PID>'s task: - commit 7bc3fa0 ("procfs: allow reading fdinfo with PTRACE_MODE_READ") - commit 1927e49 ("procfs: prevent unprivileged processes accessing fdinfo dir") Before those changes, inode based system calls like inotify_add_watch(2) would fail when the current task didn't have sufficient read permissions: [...] lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0500, st_size=0, ...}) = 0 inotify_add_watch(64, "/proc/1/task/1/fdinfo", IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE| IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied) [...] This matches the documented behavior in the inotify_add_watch(2) man page: ERRORS EACCES Read access to the given file is not permitted. After those changes, inotify_add_watch(2) started succeeding despite the current task not having PTRACE_MODE_READ privileges on the target task: [...] lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 inotify_add_watch(64, "/proc/1/task/1/fdinfo", IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE| IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = 1757 openat(AT_FDCWD, "/proc/1/task/1/fdinfo", O_RDONLY|O_NONBLOCK|O_CLOEXEC|O_DIRECTORY) = -1 EACCES (Permission denied) [...] This change in behavior broke .NET prior to v7. See the github link below for the v7 commit that inadvertently/quietly (?) fixed .NET after the kernel changes mentioned above. Return to the old behavior by moving the PTRACE_MODE_READ check out of the file .open operation and into the inode .permission operation: [...] lstat("/proc/1/task/1/fdinfo", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0 inotify_add_watch(64, "/proc/1/task/1/fdinfo", IN_MODIFY|IN_ATTRIB|IN_MOVED_FROM|IN_MOVED_TO|IN_CREATE|IN_DELETE| IN_ONLYDIR|IN_DONT_FOLLOW|IN_EXCL_UNLINK) = -1 EACCES (Permission denied) [...] Reported-by: Kevin Parsons (Microsoft) <parsonskev@gmail.com> Link: dotnet/runtime@89e5469 Link: https://stackoverflow.com/questions/75379065/start-self-contained-net6-build-exe-as-service-on-raspbian-system-unauthorizeda Fixes: 7bc3fa0 ("procfs: allow reading fdinfo with PTRACE_MODE_READ") Cc: stable@vger.kernel.org Cc: Christian Brauner <brauner@kernel.org> Cc: Christian König <christian.koenig@amd.com> Cc: Jann Horn <jannh@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Hardik Garg <hargar@linux.microsoft.com> Cc: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Tyler Hicks (Microsoft) <code@tyhicks.com> Link: https://lore.kernel.org/r/20240501005646.745089-1-code@tyhicks.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ompletion commit 2fbe479 upstream. Commit 47ea0dd ("platform/chrome: cros_ec_lpc: Separate host command and irq disable") re-ordered the resume sequence. Before that change, cros_ec resume sequence is: 1) Enable IRQ 2) Send resume event 3) Handle events during suspend After commit 47ea0dd ("platform/chrome: cros_ec_lpc: Separate host command and irq disable"), cros_ec resume sequence is: 1) Enable IRQ 2) Handle events during suspend 3) Send resume event. This re-ordering leads to delayed handling of any events queued between items 2) and 3) with the updated sequence. Also in certain platforms, EC skips triggering interrupt for certain events eg. mkbp events until the resume event is received. Such events are stuck in the host event queue indefinitely. This change puts back the original order to avoid any delay in handling the pending events. Fixes: 47ea0dd ("platform/chrome: cros_ec_lpc: Separate host command and irq disable") Cc: <stable@vger.kernel.org> Cc: Lalith Rajendran <lalithkraj@chromium.org> Cc: <chrome-platform@lists.linux.dev> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Link: https://lore.kernel.org/r/20240429121343.v2.1.If2e0cef959f1f6df9f4d1ab53a97c54aa54208af@changeid Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9d3490 upstream. Up until now, the necessary scm availability check has not been performed, leading to possible null pointer dereferences (which did happen for me on RB1). Fix that. Fixes: 53bca37 ("thermal/drivers/qcom: Add support for LMh driver") Cc: <stable@vger.kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20240308-topic-rb1_lmh-v2-2-bac3914b0fe3@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f592cc5 upstream. Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned addresses associated with it. These control voltage, enable state, mode, and in legacy targets, voltage headroom. The current in-flight request checking logic looks for exact address matches. Requests for different addresses of the same RPMh resource as thus not detected as in-flight. Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight request check for VRM requests by ignoring the address offset. This ensures that only one request is allowed to be in-flight for a given VRM resource. This is needed to avoid scenarios where request commands are carried out by RPMh hardware out-of-order leading to LDO regulator over-current protection triggering. Fixes: 658628e ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs") Cc: stable@vger.kernel.org Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c81bf14 upstream. Listed devices need the override for the keyboard to work. Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2633c58 upstream. There is no such device as "as3722@40", because its name is "pmic". Use phandles for aliases to fix relying on full node path. This corrects aliases for RTC devices and also fixes dtc W=1 warning: tegra132-norrin.dts:12.3-36: Warning (alias_paths): /aliases:rtc0: aliases property is not a valid node (/i2c@7000d000/as3722@40) Fixes: 0f279eb ("arm64: tegra: Add NVIDIA Tegra132 Norrin support") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5f390a upstream. The 'local-bd-address' property is used to pass a unique Bluetooth device address from the boot firmware to the kernel and should otherwise be left unset so that the OS can prevent the controller from being used until a valid address has been provided through some other means (e.g. using btmgmt). Fixes: 60f77ae ("arm64: dts: qcom: qcs404-evb: Enable uart3 and add Bluetooth") Cc: stable@vger.kernel.org # 5.10 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20240501075201.4732-1-johan+linaro@kernel.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ac4c1d upstream. Although the Samsung SoC keypad binding defined linux,keypad-no-autorepeat property, Linux driver never implemented it and always used linux,input-no-autorepeat. Correct the DTS to use property actually implemented. This also fixes dtbs_check errors like: exynos4412-smdk4412.dtb: keypad@100a0000: 'key-A', 'key-B', 'key-C', 'key-D', 'key-E', 'linux,keypad-no-autorepeat' do not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+' Cc: <stable@vger.kernel.org> Fixes: c9b92dd ("ARM: dts: Add keypad entries to SMDK4412") Link: https://lore.kernel.org/r/20240312183105.715735-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 88208d3 upstream. Although the Samsung SoC keypad binding defined linux,keypad-no-autorepeat property, Linux driver never implemented it and always used linux,input-no-autorepeat. Correct the DTS to use property actually implemented. This also fixes dtbs_check errors like: exynos4412-origen.dtb: keypad@100a0000: 'linux,keypad-no-autorepeat' does not match any of the regexes: '^key-[0-9a-z]+$', 'pinctrl-[0-9]+' Cc: <stable@vger.kernel.org> Fixes: bd08f62 ("ARM: dts: Add keypad entries to Exynos4412 based Origen") Link: https://lore.kernel.org/r/20240312183105.715735-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4a5999 upstream. Define the HAVE_ARCH_HUGETLB_UNMAPPED_AREA macro like other platforms do in their page.h files to avoid this compile warning: arch/parisc/mm/hugetlbpage.c:25:1: warning: no previous prototype for 'hugetlb_get_unmapped_area' [-Wmissing-prototypes] Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 6.0+ Reported-by: John David Anglin <dave.anglin@bell.net> Tested-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 487fa28 upstream. The util-linux debian package fails to build on parisc, because sigset_t isn't defined in asm/signal.h when included from userspace. Move the sigset_t type from internal header to the uapi header to fix the build. Link: https://buildd.debian.org/status/fetch.php?pkg=util-linux&arch=hppa&ver=2.40-7&stamp=1714163443&raw=0 Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4f9d5a upstream. A system crash like this Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403 Fault in home space mode while using kernel ASCE. AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d Oops: 0038 ilc:3 [#1] PREEMPT SMP Modules linked in: mlx5_ib ... CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8 Hardware name: IBM 3931 A01 704 (LPAR) Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3 Krnl GPRS: 0000000000000001 ffffffffffffffc0 0000000000000001 00000048f96b75d3 000000cb00000100 ffffffffffffffff ffffffffffffffff 000000cb7df6fce0 000000cb7df6fce0 00000000ffffffff 000000000000002b 00000048ffffffff 000003ff9b2dbc80 200000cb7df6fcd8 0000014bffffffc0 000000cb7df6fbc8 Krnl Code: 0000014b75e7b5fc: a7840047 brc 8,0000014b75e7b68a 0000014b75e7b600: 18b2 lr %r11,%r2 #0000014b75e7b602: a7f4000a brc 15,0000014b75e7b616 >0000014b75e7b606: eb22d00000e6 laog %r2,%r2,0(%r13) 0000014b75e7b60c: a7680001 lhi %r6,1 0000014b75e7b610: 187b lr %r7,%r11 0000014b75e7b612: 84960021 brxh %r9,%r6,0000014b75e7b654 0000014b75e7b616: 18e9 lr %r14,%r9 Call Trace: [<0000014b75e7b606>] ap_parse_bitmap_str+0x10e/0x1f8 ([<0000014b75e7b5dc>] ap_parse_bitmap_str+0xe4/0x1f8) [<0000014b75e7b758>] apmask_store+0x68/0x140 [<0000014b75679196>] kernfs_fop_write_iter+0x14e/0x1e8 [<0000014b75598524>] vfs_write+0x1b4/0x448 [<0000014b7559894c>] ksys_write+0x74/0x100 [<0000014b7618a440>] __do_syscall+0x268/0x328 [<0000014b761a3558>] system_call+0x70/0x98 INFO: lockdep is turned off. Last Breaking-Event-Address: [<0000014b75e7b636>] ap_parse_bitmap_str+0x13e/0x1f8 Kernel panic - not syncing: Fatal exception: panic_on_oops occured when /sys/bus/ap/a[pq]mask was updated with a relative mask value (like +0x10-0x12,+60,-90) with one of the numeric values exceeding INT_MAX. The fix is simple: use unsigned long values for the internal variables. The correct checks are already in place in the function but a simple int for the internal variables was used with the possibility to overflow. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 830999b upstream. Rework the cpacf query functions to use the correct RRE or RRF instruction formats and set register fields within instructions correctly. Fixes: 1afd43e ("s390/crypto: allow to query all known cpacf functions") Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Suggested-by: Juergen Christ <jchrist@linux.ibm.com> Suggested-by: Holger Dengler <dengler@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32e8bd6 upstream. Instead of calling BUG() at runtime introduce and use a prototype for a non-existing function to produce a link error during compile when a not supported opcode is used with the __cpacf_query() or __cpacf_check_opcode() inline functions. Suggested-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Holger Dengler <dengler@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Cc: stable@vger.kernel.org Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ndler commit 38baed9 upstream. In an In-Band Interrupt (IBI) handle, the code logic is as follows: 1: writel(SVC_I3C_MCTRL_REQUEST_AUTO_IBI | SVC_I3C_MCTRL_IBIRESP_AUTO, master->regs + SVC_I3C_MCTRL); 2: ret = readl_relaxed_poll_timeout(master->regs + SVC_I3C_MSTATUS, val, SVC_I3C_MSTATUS_IBIWON(val), 0, 1000); ... 3: ibitype = SVC_I3C_MSTATUS_IBITYPE(status); ibiaddr = SVC_I3C_MSTATUS_IBIADDR(status); SVC_I3C_MSTATUS_IBIWON may be set before step 1. Thus, step 2 will return immediately, and the I3C controller has not sent out the 9th SCL yet. Consequently, ibitype and ibiaddr are 0, resulting in an unknown IBI type occurrence and missing call I3C client driver's IBI handler. A typical case is that SVC_I3C_MSTATUS_IBIWON is set when an IBI occurs during the controller send start frame in svc_i3c_master_xfer(). Clear SVC_I3C_MSTATUS_IBIWON before issue SVC_I3C_MCTRL_REQUEST_AUTO_IBI to fix this issue. Cc: stable@vger.kernel.org Fixes: 5e5e3c9 ("i3c: master: svc: fix wrong data return when IBI happen during start frame") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20240506164009.21375-3-Frank.Li@nxp.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b84a8ab upstream. irq_find_at_or_after() dereferences the interrupt descriptor which is returned by mt_find() while neither holding sparse_irq_lock nor RCU read lock, which means the descriptor can be freed between mt_find() and the dereference: CPU0 CPU1 desc = mt_find() delayed_free_desc(desc) irq_desc_get_irq(desc) The use-after-free is reported by KASAN: Call trace: irq_get_next_irq+0x58/0x84 show_stat+0x638/0x824 seq_read_iter+0x158/0x4ec proc_reg_read_iter+0x94/0x12c vfs_read+0x1e0/0x2c8 Freed by task 4471: slab_free_freelist_hook+0x174/0x1e0 __kmem_cache_free+0xa4/0x1dc kfree+0x64/0x128 irq_kobj_release+0x28/0x3c kobject_put+0xcc/0x1e0 delayed_free_desc+0x14/0x2c rcu_do_batch+0x214/0x720 Guard the access with a RCU read lock section. Fixes: 721255b ("genirq: Use a maple tree for interrupt descriptor management") Signed-off-by: dicken.ding <dicken.ding@mediatek.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240524091739.31611-1-dicken.ding@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ithout base extension commit ffa077b upstream. If a process module does not have base config extension then the same format applies to all of it's inputs and the process->base_config_ext is NULL, causing NULL dereference when specifically crafted topology and sequences used. Fixes: 648fea1 ("ASoC: SOF: ipc4-topology: set copier output format for process module") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Cc: stable@vger.kernel.org Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe85f6e upstream. The current code clears the bank selection MSB/LSB after sending a program change, but this can be wrong, as many apps may not send the full bank selection with both MSB and LSB but sending only one. Better to keep the previous bank set. Fixes: 0b5288f ("ALSA: ump: Add legacy raw MIDI support") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240529083823.5778-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac0d71e upstream. When a UMP Stream Configuration message is received, the driver tries to switch the protocol, but there was no sanity check of the protocol, hence it can pass an invalid value. Add the check and bail out if a wrong value is passed. Fixes: a798076 ("ALSA: ump: Add helper to change MIDI protocol") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240529164723.18309-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ec8ebd upstream. gpu_get_node_map() uses pci_read_config_dword() that returns PCIBIOS_* codes. The return code is then returned all the way into the module init function amd64_edac_init() that returns it as is. The module init functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from gpu_get_node_map(). For consistency, convert also the other similar cases which return PCIBIOS_* codes even if they do not have any bugs at the moment. Fixes: 4251566 ("EDAC/amd64: Cache and use GPU node map") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527132236.13875-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8367a7 upstream. errcmd_enable_error_reporting() uses pci_{read,write}_config_word() that return PCIBIOS_* codes. The return code is then returned all the way into the probe function igen6_probe() that returns it as is. The probe functions, however, should return normal errnos. Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal errno before returning it from errcmd_enable_error_reporting(). Fixes: 10590a9 ("EDAC/igen6: Add EDAC driver for Intel client SoCs using IBECC") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240527132236.13875-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c0a2e0 upstream. Shifting *signed int* typed constant 1 left by 31 bits causes undefined behavior. Specify the correct *unsigned long* type by using 1UL instead. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. Cc: stable@vger.kernel.org Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f06d1b1 upstream. Olga showed me a case where the client was sending multiple READ_PLUS calls to the server in parallel, and the server replied NFS4ERR_OPNOTSUPP to each. The client would fall back to READ for the first reply, but fail to retry the other calls. I fix this by removing the test for NFS_CAP_READ_PLUS in nfs4_read_plus_not_supported(). This allows us to reschedule any READ_PLUS call that has a NFS4ERR_OPNOTSUPP return value, even after the capability has been cleared. Reported-by: Olga Kornievskaia <kolga@netapp.com> Fixes: c567552 ("NFS: Add READ_PLUS data segment support") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
…ts() commit d4e9a96 upstream. In function eventfs_find_events,there is a potential null pointer that may be caused by calling update_events_attr which will perform some operations on the members of the ei struct when ei is NULL. Hence,When ei->is_freed is set,return NULL directly. Link: https://lore.kernel.org/linux-trace-kernel/20240513053338.63017-1-hao.ge@linux.dev Cc: stable@vger.kernel.org Fixes: 8186fff ("tracefs/eventfs: Use root and instance inodes as default ownership") Signed-off-by: Hao Ge <gehao@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8898e7f upstream. The directories require unique inode numbers but all the eventfs files have the same inode number. Prevent the directories from having the same inode numbers as the files as that can confuse some tooling. Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.428826685@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Fixes: 834bf76 ("eventfs: Save directory inodes in the eventfs_inode structure") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0bcfd9a upstream. When the inode is being dropped from the dentry, the TRACEFS_EVENT_INODE flag needs to be cleared to prevent a remount from calling eventfs_remount() on the tracefs_inode private data. There's a race between the inode is dropped (and the dentry freed) to where the inode is actually freed. If a remount happens between the two, the eventfs_inode could be accessed after it is freed (only the dentry keeps a ref count on it). Currently the TRACEFS_EVENT_INODE flag is cleared from the dentry iput() function. But this is incorrect, as it is possible that the inode has another reference to it. The flag should only be cleared when the inode is really being dropped and has no more references. That happens in the drop_inode callback of the inode, as that gets called when the last reference of the inode is released. Remove the tracefs_d_iput() function and move its logic to the more appropriate tracefs_drop_inode() callback function. Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.908205106@goodmis.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Fixes: baa23a8 ("tracefs: Reset permissions on remount if permissions are options") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d274c1 upstream. We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb33eb2 upstream. Qgroup extent records are created when delayed ref heads are created and then released after accounting extents at btrfs_qgroup_account_extents(), called during the transaction commit path. If a transaction is aborted we free the qgroup records by calling btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs(), unless we don't have delayed references. We are incorrectly assuming that no delayed references means we don't have qgroup extents records. We can currently have no delayed references because we ran them all during a transaction commit and the transaction was aborted after that due to some error in the commit path. So fix this by ensuring we btrfs_qgroup_destroy_extent_records() at btrfs_destroy_delayed_refs() even if we don't have any delayed references. Reported-by: syzbot+0fecc032fa134afd49df@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/0000000000004e7f980619f91835@google.com/ Fixes: 81f7eb0 ("btrfs: destroy qgroup extent records on transaction abort") CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit edb3277 upstream. When converting a legacy system message to a UMP packet, it forgot to modify the UMP type field but keeping the default type (either type 2 or 4). Correct to the right type for system messages. Fixes: e9e0281 ("ALSA: seq: Automatic conversion of UMP events") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240529083800.5742-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1e7cee upstream. The Linux Kernel Memory Model [1][2] requires RMW operations that have a return value to be fully ordered. BPF atomic operations with BPF_FETCH (including BPF_XCHG and BPF_CMPXCHG) return a value back so they need to be JITed to fully ordered operations. POWERPC currently emits relaxed operations for these. We can show this by running the following litmus-test: PPC SB+atomic_add+fetch { 0:r0=x; (* dst reg assuming offset is 0 *) 0:r1=2; (* src reg *) 0:r2=1; 0:r4=y; (* P0 writes to this, P1 reads this *) 0:r5=z; (* P1 writes to this, P0 reads this *) 0:r6=0; 1:r2=1; 1:r4=y; 1:r5=z; } P0 | P1 ; stw r2, 0(r4) | stw r2,0(r5) ; | ; loop:lwarx r3, r6, r0 | ; mr r8, r3 | ; add r3, r3, r1 | sync ; stwcx. r3, r6, r0 | ; bne loop | ; mr r1, r8 | ; | ; lwa r7, 0(r5) | lwa r7,0(r4) ; ~exists(0:r7=0 /\ 1:r7=0) Witnesses Positive: 9 Negative: 3 Condition ~exists (0:r7=0 /\ 1:r7=0) Observation SB+atomic_add+fetch Sometimes 3 9 This test shows that the older store in P0 is reordered with a newer load to a different address. Although there is a RMW operation with fetch between them. Adding a sync before and after RMW fixes the issue: Witnesses Positive: 9 Negative: 0 Condition ~exists (0:r7=0 /\ 1:r7=0) Observation SB+atomic_add+fetch Never 0 9 [1] https://www.kernel.org/doc/Documentation/memory-barriers.txt [2] https://www.kernel.org/doc/Documentation/atomic_t.txt Fixes: aea7ef8 ("powerpc/bpf/32: add support for BPF_ATOMIC bitwise operations") Fixes: 2d9206b ("powerpc/bpf/32: Add instructions for atomic_[cmp]xchg") Fixes: dbe6e24 ("powerpc/bpf/64: add support for atomic fetch operations") Fixes: 1e82dfa ("powerpc/bpf/64: Add instructions for atomic_[cmp]xchg") Cc: stable@vger.kernel.org # v6.0+ Signed-off-by: Puranjay Mohan <puranjay@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Naveen N Rao <naveen@kernel.org> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240513100248.110535-1-puranjay@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02c4187 upstream. Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such deadlock. Cc: stable@vger.kernel.org Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a71d090 upstream. The helper waiting for a listener port can match any socket whose hexadecimal representation of source or destination addresses matches that of the given port. Additionally, any socket state is accepted. All the above can let the helper return successfully before the relevant listener is actually ready, with unexpected results. So far I could not find any related failure in the netdev CI, but the next patch is going to make the critical event more easily reproducible. Address the issue matching the port hex only vs the relevant socket field and additionally checking the socket state for TCP sockets. Fixes: 3bdd9fd ("selftests/net: synchronize udpgro tests' tx and rx connection") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c2f885 upstream. This was already defined locally by init/main.c, but let's make it generic, as arch/x86/kernel/cpu/topology.c is going to make use of it to have more uniform code. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240613113223.281378087@linuxfoundation.org Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com> Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Mark Brown <broonie@kernel.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avenger-285714
pushed a commit
that referenced
this pull request
Oct 6, 2024
[ Upstream commit 18ec12c ] Inject fault while probing of-fpga-region, if kasprintf() fails in module_add_driver(), the second sysfs_remove_link() in exit path will cause null-ptr-deref as below because kernfs_name_hash() will call strlen() with NULL driver_name. Fix it by releasing resources based on the exit path sequence. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Mem abort info: ESR = 0x0000000096000005 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x05: level 1 translation fault Data abort info: ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [dfffffc000000000] address between user and kernel address ranges Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: of_fpga_region(+) fpga_region fpga_bridge cfg80211 rfkill 8021q garp mrp stp llc ipv6 [last unloaded: of_fpga_region] CPU: 2 UID: 0 PID: 2036 Comm: modprobe Not tainted 6.11.0-rc2-g6a0e38264012 #295 Hardware name: linux,dummy-virt (DT) pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : strlen+0x24/0xb0 lr : kernfs_name_hash+0x1c/0xc4 sp : ffffffc081f97380 x29: ffffffc081f97380 x28: ffffffc081f97b90 x27: ffffff80c821c2a0 x26: ffffffedac0be418 x25: 0000000000000000 x24: ffffff80c09d2000 x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000001840 x17: 0000000000000000 x16: 0000000000000000 x15: 1ffffff8103f2e42 x14: 00000000f1f1f1f1 x13: 0000000000000004 x12: ffffffb01812d61d x11: 1ffffff01812d61c x10: ffffffb01812d61c x9 : dfffffc000000000 x8 : 0000004fe7ed29e4 x7 : ffffff80c096b0e7 x6 : 0000000000000001 x5 : ffffff80c096b0e0 x4 : 1ffffffdb990efa2 x3 : 0000000000000000 x2 : 0000000000000000 x1 : dfffffc000000000 x0 : 0000000000000000 Call trace: strlen+0x24/0xb0 kernfs_name_hash+0x1c/0xc4 kernfs_find_ns+0x118/0x2e8 kernfs_remove_by_name_ns+0x80/0x100 sysfs_remove_link+0x74/0xa8 module_add_driver+0x278/0x394 bus_add_driver+0x1f0/0x43c driver_register+0xf4/0x3c0 __platform_driver_register+0x60/0x88 of_fpga_region_init+0x20/0x1000 [of_fpga_region] do_one_initcall+0x110/0x788 do_init_module+0x1dc/0x5c8 load_module+0x3c38/0x4cac init_module_from_file+0xd4/0x128 idempotent_init_module+0x2cc/0x528 __arm64_sys_finit_module+0xac/0x100 invoke_syscall+0x6c/0x258 el0_svc_common.constprop.0+0x160/0x22c do_el0_svc+0x44/0x5c el0_svc+0x48/0xb8 el0t_64_sync_handler+0x13c/0x158 el0t_64_sync+0x190/0x194 Code: f2fbffe1 a90157f4 12000802 aa0003f5 (38e16861) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception Fixes: 85d2b0a ("module: don't ignore sysfs_create_link() failures") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20240812080658.2791982-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Avenger-285714
pushed a commit
to Avenger-285714/DeepinKernel
that referenced
this pull request
Feb 3, 2026
commit eefea61569216c047964a2ee1e370b5dc4fb29da openEuler When handling an exception, both daif and allint will be set by hardware. In __gic_handle_irq_from_irqson(), it only consider the Pseudo-NMI by clear daif.I and daif.F and set PMR to GIC_PRIO_IRQOFF to enable Pseudo-NMI and mask IRQ. If the hardwire NMI is enabled, it should also clear allint to enable hardware NMI and mask IRQ before handle a IRQ, otherwise the allint will be set in softirq context and local_irq_enable() can not enable IRQ, and watchdog NMI can not enter too which will cause below hard LOCKUP. And in gic_handle_irq(), it only consider the Pseudo-NMI when an exception has been taken from a context with IRQs disabled. So add a gic_supports_nmi() helper which consider both Pseudo-NMI and hardware NMI. And define PSR_ALLINT_BIT bit and update interrupts_enabled() as well as fast_interrupts_enabled() to consider the ALLINT bit. watchdog: Watchdog detected hard LOCKUP on cpu 1 Modules linked in: Sending NMI from CPU 0 to CPUs 1: Kernel panic - not syncing: Hard LOCKUP CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.6.0-gec40ec8c5e9f deepin-community#295 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x98/0xf8 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 panic+0x384/0x3e0 nmi_panic+0x94/0xa0 watchdog_hardlockup_check+0x1bc/0x1c8 watchdog_buddy_check_hardlockup+0x68/0x80 watchdog_timer_fn+0x88/0x2f8 __hrtimer_run_queues+0x17c/0x368 hrtimer_run_queues+0xd4/0x158 update_process_times+0x3c/0xc0 tick_periodic+0x44/0xc8 tick_handle_periodic+0x3c/0xb0 arch_timer_handler_virt+0x3c/0x58 handle_percpu_devid_irq+0x90/0x248 generic_handle_domain_irq+0x34/0x58 gic_handle_irq+0x58/0x110 call_on_irq_stack+0x24/0x58 do_interrupt_handler+0x88/0x98 el1_interrupt+0x40/0xc0 el1h_64_irq_handler+0x24/0x30 el1h_64_irq+0x64/0x68 default_idle_call+0x5c/0x160 do_idle+0x220/0x288 cpu_startup_entry+0x40/0x50 rest_init+0xf0/0xf8 arch_call_rest_init+0x18/0x20 start_kernel+0x520/0x668 __primary_switched+0xbc/0xd0 Fixes: dd8b74f04223 ("arm64/nmi: Manage masking for superpriority interrupts along with DAIF") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Jie Liu <liujie375@h-partners.com> Signed-off-by: huwentao <wentaohu0417@163.com> Signed-off-by: WangYuli <wangyl5933@chinaunicom.cn>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
20 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Update kernel base to 6.6.34