Print History Not Populating

[krautech]

Not populating, it used to with my P2S but i re-setup OSM on a different NAS so its a fresh install and im now using an X2D.

Found this error but not sure where to go from there

_openspoolman-openspoolman-1_logs.txt

[alek-05]

Similar issue.

KeyError: 'complete' Traceback (most recent call last): File "/home/app/mqtt_bambulab.py", line 423, in on_message processMessage(data) File "/home/app/mqtt_bambulab.py", line 357, in processMessage if PENDING_PRINT_METADATA and PENDING_PRINT_METADATA["complete"]:

And even if it seems working now (recreate once more the container) the history is not updated. I tried using the latest tag, the dev (currently in use), the fix-duplicate-prints one. No changes!

[2026-04-19 12:16:34] [filament-tracker] on_message command=push_status gcode_state=RUNNING [2026-04-19 12:16:34] AMS [A] (hum: 5, temp: 25.2ºC) [2026-04-19 12:16:34] - [A0] PETG HF FFFFFFFF (022%) [[ CF5BF023645A4CA18F349383B3BD9172 ]] [2026-04-19 12:16:34] Skipping set active tray [2026-04-19 12:16:34] - [A1] PETG HF 000000FF (089%) [[ 69C0CB263B12481A8CD15C80C7B9FBD8 ]] [2026-04-19 12:16:34] Skipping set active tray [2026-04-19 12:16:34] - [A2] PLA Basic 0086D6FF (074%) [[ 2ADBC3E94A2F45638B05969568179FD5 ]] [2026-04-19 12:16:34] Skipping set active tray [2026-04-19 12:16:34] - [A3] FFFFFFFF (-01%) [[ 00000000000000000000000000000000 ]] [2026-04-19 12:16:34] - non Bambulab Spool!