Skip to content

Configs

e2ret edited this page Aug 31, 2026 · 9 revisions

Configs — Configuration file editor

configs

The CONFIGS tab lets you edit all the gateway's configuration files right in the browser, no SSH required.

TEXT mode

Raw config text editor. Tabs:

noema_lxmf_bridge

The MQTT bridge config. Main parameters:

[mqtt]
host = 192.168.1.100    # your MQTT broker's IP
port = 1883
username = mqtt          # login
password = yourpassword  # password

After clicking SAVE, the service restarts automatically. Connection status is shown in the metrics: MQTT BROKER: OK.

nomadnet

Nomadnet node configuration: name, description, storage settings.

reticulum

Reticulum network configuration: interfaces, LoRa parameters, TCP connections.

Example of adding a TCP interface manually:

[[Public Node]]
  type = TCPClientInterface
  enabled = yes
  target_host = rmap.world
  target_port = 4242

RETICULUM FORM mode

A visual editor for the Reticulum config. Split into two sections:

Core parameters

  • enable_transport — enable packet transit through the gateway
  • share_instance — allow local apps to connect
  • Shared instance ports

Interfaces (INTERFACES)

Interface cards in two columns. Every parameter can be edited for each one.

Buttons:

  • + ADD INTERFACE — add a new interface, choosing its type (TCP, RNode, Auto, etc.)
  • DELETE — mark an interface for deletion (applied on save)
  • SAVE & RESTART — save the config and restart rnsd

File locations

/etc/noema/bridge.cfg          — noema_lxmf_bridge config
~/.reticulum/config            — Reticulum config
~/.nomadnetwork/config         — Nomadnet config

Clone this wiki locally