Skip to content
e2ret edited this page Aug 31, 2026 · 5 revisions

How it works

Reticulum

Reticulum is a next-generation network protocol created by Mark Qvist. It's fundamentally different from the internet you're used to:

  • No central servers required — every device is a node in the network
  • Works over any channel — WiFi, Ethernet, LoRa, I2P, TCP/IP
  • Encryption by default — all traffic is encrypted at the protocol level
  • Hash-based addressing — a node's address is a cryptographic identifier, not an IP

Imagine an internet with no providers, no DNS, no central points of failure. Packets find their way to the recipient over any available channel — whether that's a WiFi router or a LoRa radio out in the countryside.

NOEMA RNSGate runs the rnsd daemon — this is the Reticulum network node that keeps up connections with other nodes at all times.

LoRa

LoRa (Long Range) is a radio technology operating at 433/868/915 MHz with very low power consumption and long range.

Typical characteristics:

  • Range in the city: 1–3 km
  • Range in open terrain / elevated position: up to 10–20 km
  • Data rate: 0.3–50 kbit/s (low, but enough for messages)
  • Power draw: microwatts in standby

RNode is a device based on the SX1262/SX1276 chip that connects to the gateway via USB and becomes a LoRa interface for the Reticulum network. Through it, a smartphone with Sideband or MeshChat can join the Reticulum network without internet — just over radio.

LXMF

LXMF (Lightweight Extensible Message Format) is a messaging protocol built on top of Reticulum. Think of it as email, but decentralized and encrypted.

Every node has an LXMF address — a 16-byte hash of its public key. Messages are stored and forwarded using store-and-forward: if the recipient isn't reachable right now, the message will be delivered once they come back online.

NOEMA RNSGate Lite has an LXMF Bridge — a special address you can send a command to from any LXMF client (Sideband, MeshChat), and the gateway forwards it to MQTT → Home Assistant.

For example, send the message "lights" to the gateway's address, and Home Assistant turns on the lights in the room. No internet needed, just LoRa.

MQTT

MQTT (Message Queuing Telemetry Transport) is a lightweight messaging protocol for IoT devices. It works on a publish/subscribe model through a central broker.

In the Home Assistant ecosystem, MQTT is the standard for device integration. The gateway connects to your MQTT broker (usually Mosquitto on your HA server) and:

  • Receives LXMF messages from the Reticulum network → publishes them to an MQTT topic
  • Subscribes to an MQTT topic → sends replies back into Reticulum

This creates a two-way bridge between the decentralized radio network and your smart home.

I2P

I2P (Invisible Internet Project) is an anonymous overlay network where traffic passes through several encrypted layers and intermediate nodes, hiding both the source and the destination.

In NOEMA RNSGate, I2P is used to connect two gateways without public IP addresses. Each gateway gets an address like xxx.b32.i2p — another gateway can connect to it anonymously through this address, even if both are behind NAT with no port forwarding.

Typical scenario: two gateways in different cities connect over I2P and form a secure channel for the Reticulum network.

Nomadnet

Nomadnet is a decentralized information network built on top of Reticulum. Think of it as the web, but without servers or DNS. Every node can publish pages in Micron — a simple markup language.

Pages are addressed by the node's hash:

5f3d0144348220d7da85331e1e512cfe:/page/index.mu

NOEMA RNSGate Lite automatically publishes an info page for your gateway, which you can edit right from the dashboard. It also includes rBrowser, a built-in browser for viewing other nodes' pages.

Clone this wiki locally